Advanced Research Projects Agency-Energy

Biologically complex coastal environments, such as coral reefs, demonstrate an equally rich ambient soundscape. Bioacoustic features of coastal soundscapes are closely tied with relative ecosystem health, functional groups present, and can be linked with specific behaviors. Biological contributions to ambient soundscapes have distinctive qualities as compared to sound associated with physical processes (i.e. wind and wave noise). While some biological components are readily identifiable, such as marine mammal or fish calls, the background noise associated with hundreds of thousands of biological clicks, snaps, and pops is not as well studied but contains a wealth of information about the ecosystem. A 64-element line array with 4.5 kHz design frequency was deployed for several field experiments off the coast of Kona, Hawaii in 2019 and 2020. Soundscape data from Hawaii were compared with comparable omnidirectional time series from Bermuda (2020) and coastal New England rocky reefs (2020–2021). Similarities in certain spectral features associated with biological sound sources were found between these unique ecosystems. The characteristic coral reef evening chorus, or significant increase in sound levels immediately prior to sunset, was consistent in Hawaii and Bermuda with comparable crepuscular changes in coastal New England.

A rapid build-out of direct air capture (DAC), deployed in order to mitigate climate change, will require significant amounts of both low-carbon thermal and electrical energy. Firm low-carbon power resources, including nuclear, geothermal, or natural gas with carbon capture, which also will become more highly valued as variable renewable energy penetration increases, would be able to provide both heat and electricity for DAC. In this study, we examined the techno-economic synergy between a hypothetical DAC plant in the year 2030 and a nuclear small modular reactor, and determined two avenues for which this relationship could benefit the nuclear plant. First, we demonstrated that, under certain assumptions, selling a portion of its energy to a DAC facility allows the nuclear plant to take in 21% less revenue from selling electricity to wholesale markets than its projected levelized cost, and still break even. Second, after estimating a potential revenue stream, we showed that an integration with DAC allows for the nuclear plant's capital costs to be up to 35% higher than what would be required if only selling electricity to wholesale markets. This could enable the nuclear plant to operate economically even in the face of variable and decreasing wholesale electricity prices, and also could offer developers more financial certainty when planning a new project. Ultimately, this study shows that the need for low-carbon energy for DAC plants might incentivize the development of advanced nuclear plants and firm low-carbon resources more broadly.

Solid Oxide Fuel Cells (SOFCs) offer the potential for compelling thermo-economic value propositions in wide range of stationary and transportation applications through their potential for high conversion efficiency and their inherent fuel flexibility. Furthermore, many of the core SOFC materials, component, and system technologies have tremendous potential in electrolysis applications where fuels or chemicals could be produced using renewable electricity. However, to date, the wide-spread commercialization of SOFC/SOEC systems has been hampered by their high cost and durability challenges.Fortunately, high temperature solid oxide-based energy conversion systems are well suited for integration with thermal-mechanical energy conversion systems in configurations that offer the potential for significant cost and thermodynamic performance synergies. Specifically, their integration with gas turbines or internal combustion engines offers the potential for ultra-high (>70%) efficiency at an attractive manufacturing cost (<$1/W). In these hybrid systems, engines or turbines are used to convert stack waste exergy to additional useful work resulting in higher overall efficiency and lower power-specific cost (e.g., $/kW) compared to SOFC-only systems.Furthermore, in the case of SOFC and gas turbine hybrid systems, the SOFC stacks are typically located downstream of the gas turbine compressor and are at elevated pressure—enabling increased Nernst potential and decreased overpotentials and thereby higher power density at constant voltage. This benefit translates into a significant power-specific stack cost reduction. Additionally, the gas turbine compressor and recuperator may serve as the SOFC stack blower and recuperator—yielding further cost synergies via the elimination of duplicative balance of plant components.In 2017, ARPA-E launched the INTEGRATE program to develop hybrid system concepts and enabling component technologies that if realized would result in 100kW-scale distributed generation systems with >70% fuel to electricity conversion efficiencies and system manufacturing costs of <$1/W. In the initial two-year Phase I portion of the program, nine teams developed a suite of hybrid system concepts. Given these concepts, the teams then proceeded to develop 1) durable SOFC stacks that are capable of operating at high (~4 bar) pressure, 2) high temperature (>600 °C) and low-cost heat exchangers, and 3) innovative control system approaches. In 2019, three of the original nine teams were selected to design, build and demonstrate 100kW-scale systems by 2023.In the interest of focusing limited financial resources on foundational development risks, while avoiding the weight, volume, and fuel flexibility challenges associated with transportation applications and mitigating the financial risks associated with adopting new technologies at utility (e.g., >100MW) scale, natural gas fueled distributed generation (DG) systems were selected as the initial INTEGRATE application target. These DG systems would offer a fuel to electric power conversion efficiency that is roughly double that of the fossil fueled portion of the US electric grid. Furthermore, as renewable fuels such as hydrogen, ammonia, and bio- or electro- derived hydrocarbons (e.g., renewable natural gas or synthetic kerosene) become available, these systems would be capable of operating on them with relatively minor fuel processing system adjustments.Moving beyond stationary DG applications, SOFC hybrid systems can leverage their fuel flexibility in the pursuit of a decarbonized of long-distance transportation sector—if the systems can be made both light and small enough. To this end, ARPA-E recently launched three programs that have taken on the challenge of developing ultra-efficient, yet compact and light weight carbon-neutral electrified propulsion systems for commercial aviation.One of these programs is focused on carbon-neutral fuel to electric power conversion sub-systems—Range Extenders for Electric Aviation with Low Carbon and High Efficiency (REEACH). In the two-year Phase 1 of this program, six of nine selected teams will develop SOFC/gas turbine/battery hybrid systems that are fueled with renewable natural gas or synthetic kerosene. Phase 1 focuses on system conceptual design and fuel conversion component risk reduction, while full system design and prototype demonstration of a sub-scale fuel-to-electric power conversion device using a carbon-neutral liquid fuel is planned for Phase 2.If the REEACH-envisioned systems are successfully developed, they would enable economically attractive all-electric commercial aircraft up to a narrow body airframe with dramatically reduced (ideally zero) net carbon emissions. Furthermore, INTEGRATE/REEACH hybrid system technologies would also have attractive value propositions in maritime, rail, or heavy-duty vehicle applications.

Art can be a way, together with Nature, to intercept that landscape and inner climate characterized by the rhythm of silence. That dimension of iridescent calm imbued with creative and vital energy, which pushes towards a universal, seductive, profound sphere. Man can, with courage, abandon himself in this harmony and melody of thoughts that suggest a vast and visionary possibility. Each person has the inner possibility to be Art, to get out of the continuous distortions of daily life, to produce a metamorphosis of one’s life. Art triggers the unconscious side of seeing, a rhythmic, dynamic principle, on which every gesture of maximum spontaneity depends, not touched by the artificial, by masks of fugacity and by false personalities. Without Art, it seems that part of real life is missing. The deep artistic power is fluid, without space or time, pulsating with new forms and substance and creating a new personal identity, contiguous to the real world, which inspires new desires. Many diseases of today and yesterday are produced by the lack of expressiveness or by the repression of personal creativity. Art produces well-being because it is the transformation of unconscious expressive energies, so life for our health.

Biancavilla was recognized as a National Priority Contaminated Site in 2002 due to environmental dispersion of amphibole fibres with fluoro-edenitic composition. The mining extraction in Monte Calvario quarries and the wide use of sand and rubble in local building industry were responsible for the inhalation of fluoro-edenite fibres by the resident population. Since 2001, environmental and health authorities have promoted a series of remediation and dust mitigation activities in order to reduce the airborne fibre concentration and population exposure. Regional Environmental Agency of Sicily Territorial - Structure of Catania (Agenzia Regionale per la Protezione Ambientale della Sicilia, ARPA Sicilia) has started in 2009 an ongoing airborne fibre monitoring. The present report describes results of fluoro-edenite time trend concentrations obtained from 865 air samples collected in Biancavilla from July, 2009 to November, 2017 and analyzed by scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS). Results demonstrate a real improvement of Biancavilla environmental situation and a gradual reduction of exposure as a consequence of the dust mitigation measures. Nevertheless, a continuous environmental follow up should be carefully carried out particularly during high risk fibre releasing activities, such as excavations and demolitions, in order to prevent adverse health effects.

Wide-bandgap power semiconductor devices offer enormous energy efficiency gains in a wide range of potential applications. As silicon-based semiconductors are fast approaching their performance limits for high power requirements, wide-bandgap semiconductors such as gallium nitride (GaN) and silicon carbide (SiC) with their superior electrical properties are likely candidates to replace silicon in the near future. Along with higher blocking voltages wide-bandgap semiconductors offer breakthrough relative circuit performance enabling low losses, high switching frequencies, and high temperature operation. ARPA-E’s SWITCHES program, started in 2014, set out to catalyze the development of vertical GaN devices using innovations in materials and device architectures to achieve three key aggressive targets: 1200V breakdown voltage (BV), 100A single-die diode and transistor current, and a packaged device cost of no more than ȼ10/A. The program is drawing to a close by the end of 2017 and while no individual project has yet to achieve all the targets of the program, they have made tremendous advances and technical breakthroughs in vertical device architecture and materials development. GaN crystals have been grown by the ammonothermal technique and 2-inch GaN wafers have been fabricated from them. Near theoretical, high-voltage (1700-4000V) and high current (up to 400A pulsed) vertical GaN diodes have been demonstrated along with innovative vertical GaN transistor structures capable of high voltage (800-1500V) and low RON (0.36-2.6 mΩ-cm2). The challenge of selective area doping, needed in order to move to higher voltage transistor devices has been identified. Furthermore, a roadmap has been developed that will allow high voltage/current vertical GaN devices to reach ȼ5/A to ȼ7/A, realizing functional cost parity with high voltage silicon power transistors.

This Collective Article presents information on 22 species belonging to 5 Phyla, arranged geographically from from west to east. The new records were found in 8 countries as follows: Spain: first record of the two scarcely known nemerteans Baseodiscus delineatus and Notospermus geniculatus in Formentera; Malta: second record of the alien fish Lagocephalus sceleratus; Italy: the alien polychaete Syllis pectinans and the isopod Paranthura japonica, as well as the cryptogenic opisthobranch Anteaeolidiella lurana, were found in the fouling assemblages along the docks of the port of Livorno. New decapod records are reported from Sicily (the alien Callinectes sapidus and the native Pachygrapsus maurus) and Apulia (Percnon gibbosus and Procambarus clarkii); the lesser amberjack Seriola fasciata extended its geographical range to the Egadi Isands and Siganus luridus was documented for the first time along the Ionian coasts of Apulia and Calabria. Slovenia: the first record of the alien bivalve Brachidontes pharaonis is reported, together with a survey of up to date Adriatic records. Greece: the first record of the gastropod Rhinoclavis kochi is reported from Gavdos island. In addition, two records of endangered and rare cartilaginous fish were reported, namely, the shark Hexanchus griseus and the ray Leucoraja fullonica, as well as additional records of Siganus luridus for Lesvos and Malleus regula and Fulvia fragilis from Astypalaia. Turkey: the black wing flyingfish Hirundichthys rondeletii is reported for the very first time from the Black Sea. Egypt: the Indo-Pacific crab Halimede ochtodes is reported as established in Port Said. In addition, biometric parameters and meristic counts are reported for Anthias anthias in Damietta. Cyprus: the alien opisthobranch gastropod Bursatella leachii is reported for first time.

In compliance with the European and Italian regulations, the Environmental Protection Agency of Umbria Region (ARPA Umbria) defined specific river monitoring programs and networks based on river type definition, human pressures and risk analysis. The Umbria Region lies in Central Italy and it can be split into three hydro-ecoregions belonging to the Mediterranean area. Data on diatom community composition were collected in five different Mediterranean macrotypes (M1-M5) throughout the diatom-based river monitoring network that is composed by 52 sampling stations in 36 watercourses. The main aim of this study was to characterise and to analyse diatom diversity across the different regional river macrotypes. Specifically, we investigated if: i) there were differences in species diversity (species richness and Shannon Index) among macrotypes; ii) there was difference in three water quality indexes (ICMi, IPS, and TI) among sites; and iii) there was a relationship between the observed ICMi, IPS and TI value and the diatom diversity. Two-hundred diatom species and varieties were identified, and the number of species per sampling station ranged from a minimum of 10 to a maximum of 38 species. The most frequent and abundant species were Amphora pediculus, Achnanthidium minutissimum, Navicula cryptotenella, Nitzschia dissipata, and each macrotype showed some peculiar species. The ecological status evaluation based on Intercalibration Common Metric Index (ICMi) classified 69% of the water bodies in high or good class. Significant differences in diversity and ICMi value among stream macrotypes were found, with M4 (small and medium mountain) and M5 (small, lowland, temporary) typologies showing the lowest species richness, and with M5 showing the lowest Shannon Index. Conversely, M2 (small and medium lowland) and M5 showed the highest ICMi value. Lastly, significant correlations between Shannon Index and the ICMi, IPS and TI indexes were found.