Partners in Development for Research, Consulting and Training (Egypt)

Abstract This study examines passive cooling low-tech vernacular architectural interventions for climate adaptation in indoor environments through an experimental case study in Egypt. Focusing on traditional methods and techniques that use natural and affordable materials, it analyses how these approaches enhance thermal comfort and sustainability in the built environment, particularly for vulnerable communities. An urban living lab methodology, combined with onsite monitoring, was employed to evaluate the efficiency of the low-tech adaptation methods. The findings demonstrate the effectiveness of natural materials and simple technological solutions in improving thermal comfort and supporting climate adaptation. The study highlights the potential of vernacular knowledge to inform modern sustainable building practices. Through this experimental, hands-on approach, it showcases the value of traditional, low-tech architectural methods in creating resilient and adaptable environments, offering insights into sustainable and affordable climate adaptation strategies that reduce indoor temperatures and generate economic savings.

Flash floods are a rapid hydrological response that occurs within a short time with rapidly rising water levels and could lead to massive structural, social and economic damages. Therefore, generating flood inundation maps becomes necessary to distinguish areas exposed to floods. Hydrodynamic models are commonly used to generate inundation maps; however, they require high computational power and time, depending on the complexity of the model. For that, researchers developed effective, fast and simplified models. Among the simplified models, the Geomorphic Flood Index (GFI) is one of the most useful classifiers to generate inundation maps. Three main objectives are addressed in this study: (1) extend the GFI classifier to predict flood extent maps for uncalibrated rainfall depths, which will enhance early warning models for better risk assessments of extreme events; (2) enhance the accuracy of the simulated inundation maps using different calibration methods; and (3) investigate the performance of the GFI in various terrains with different resolutions. Three case studies in arid regions in Saudi Arabia were examined with different topographies, using terrains of high resolutions of 1 m and resampled low resolutions, as well as various rainfall depths corresponding to 5–100-yr return periods. The HEC-RAS 2D model was used to generate reference flood inundation maps. The obtained flood extent maps show high similarity compared to the reference maps with accuracy above 80%. Strong relationships between rainfall depths and the threshold GFI parameter were developed which allow producing inundation maps for any rainfall event.

The importance of using renewable energy systems (RESs) worldwide has been consolidated. Moreover, connecting more RESs to the utility grid will lead to more technical problems. Photovoltaic (PV) and wind turbine (WT) based power plants are the most nonlinear sources of renewable energies contributing to the energy mix Electronic ballast and switching mode power supply in energy conservation of the PV and WT have caused power quality problems and less reliable output voltage. PV power plants are becoming increasingly integrated with the utility grid by onboarding certain superior power quality features. This grid integration drastically reduces the use of fossil fuels and prevents environmental hazards. This article presents the design of a 26 MWp grid-connected PV power plant, which is already tied to the Egyptian electrical network in Fares City, Kom Ombo Center, Aswan Governorate, Egypt The 26 MWp PV power plant consists of (11) blocks and the utility grid, which are simulated using Matlab/Simulink. Every block contains 2,376 kWp PV arrays connected directly to DC-DC boost converters to regulate the output DC power generated by each PV array. This output DC power is fed into a particular type of inverter called a “central inverter”, which converts it to AC power. In some cases, higher harmonic distortion at the grid and a greater negative impact on the power system performance occur when using this type of inverter. To optimize the gains of the proportional-integral (PI) controller for both the voltage and current regulators of this central inverter, meta-heuristic optimization techniques (MOTs) are used. During this article, Gray Wolf Optimization (GWO), Harris Hawks Optimization (HHO), and Arithmetic Optimization Algorithm (AOA) are applied as MOTs to enhance the quality of the power and voltage in addition to limiting the total harmonic distortions (THD) under the effect of different sunlight conditions and partial shading. As a result, the AOA-based controllers are found to show outstanding results and superior performance compared to GWO and HHO regarding solution quality and computational efficiency. Finally, MOTs are the best solution to most electrical problems regarding controlling nonlinear and high-penetration systems, such as PV power plants connected to the utility grid.

A new Schiff base, 4-((1E,2E)-3-(furan-2-yl)allylidene)amino)-N-(5-methylisoxazol-3-yl) benzene-sulfonamide (L), was synthesized by thermal condensation of 3-(2-furyl)acrolein and sulfamethoxazole (SMX), and the furan Schiff base (L) was converted to a phenol Schiff base (L’) according to the Diels–Alder [4 + 2] cycloaddition reaction and studied experimentally. The structural and spectroscopic properties of the Schiff base were also corroborated by utilizing density functional theory (DFT) calculations. Furthermore, a series of lanthanide and transition metal complexes of the Schiff base were synthesized from the nitrate salts of Gd, Sm, Nd, and Zn (L1, L2, L3, and L4), respectively. Various spectroscopic studies confirmed the chemical structures of the Schiff-base ligand and its complexes. Based on the spectral studies, a nine-coordinated geometry was assigned to the lanthanide complexes and a six-coordinated geometry to the zinc complex. The elemental analysis data confirmed the suggested structure of the metal complexes, and the TGA studies confirmed the presence of one coordinated water molecule in the lanthanide complexes and one crystalline water molecule in the zinc complex; in addition, the conductivity showed the neutral nature of the complexes. Therefore, it is suggested that the ligand acts as a bidentate through coordinates to each metal atom by the isoxazole nitrogen and oxygen atoms of the sulfur dioxide moiety of the SMX based on FTIR studies. The ligand and its complexes were tested for their anti-inflammatory, anti-hemolytic, and antioxidant activities by various colorimetric methods. These complexes were found to exhibit potential effects of the selected biological activities.

This study proposes an efficient asset management framework that enables decision makers to prioritize the maintenance of their roads, while focusing on the most critical road segments. In particular, this study first extends the application of reliability theory to estimate the overall network condition. Following that, this study proposes a new consequence of failure function for the whole road network based on road segments’ reliability, age, and road agency preferences. Finally, the study proposes an efficient multi-objective optimization algorithm, with the goal of maximizing overall network performance with the least maintenance and computational cost. The suggested framework was applied to three main roads in Jordan and validated statistically by comparing its performance to that of a typical multi-objective genetic algorithm (GA) under various scenarios and utilizing multiple performance metrics. The results show that the proposed algorithm outperforms the traditional GA in terms of objective function values, convergence, and solution spread.