A VLSI Architecture for the PRESENT Block Cipher with FPGA and ASIC Implementations

In this study, low‐cost and high‐throughput hardware implementations of the HIGHT (HIGh security and lightweigHT) and PRESENT lightweight block ciphers are presented. One of the most complex blocks in the HIGHT algorithm is addition modulo . In the proposed structure for implementation of this modular adder, the authors used the structure of Ladner‐Fischer, Han‐Carlson, Kogge‐Stone and Sklansky adders, which are parallel prefix adders with low critical path delay and suitable hardware resources. In the PRESENT block cipher, for two key lengths 80‐bit and 128‐bit, the S‐box is implemented based on an area‐optimised combinational logic circuit. In the proposed S‐box structure, the number of logic gates and critical path delay is reduced by using Karnaugh mapping and further factorisation. Also, to reduce the latency and increase throughput, the loop unrolling technique is applied in the structures. Implementation results of the proposed architectures in 180 nm complementary metal–oxide–semiconductor technology for different unroll factors are achieved. The results show improvements in terms of execution time, throughput and throughput/area compared to other related works.

<span lang="EN-US">The internet of things (IoT) is an emerging and robust technology to interconnect billions of objects or devices via the internet to communicate smartly. The radio frequency identification (RFID) system plays a significant role in IoT systems, providing most features like mutual establishment, key establishment, and data confidentiality. This manuscript designed secure authentication of IoT-based RFID systems using the light-weight PRESENT algorithm on the hardware platform. The PRESENT-256 block cipher is considered in this work, and it supports 64-bit data with a 256-key length. The PRESENT-80/128 cipher is also designed along with PRESENT-256 at electronic codebook (ECB) mode for Secured mutual authentication between RFID tag and reader for IoT applications. The secured authentication is established in two stages: Tag recognition from reader, mutual authentication between tag and reader using PRESENT-80/128/256 cipher modules. The complete secured authentication of IoT-based RFID system simulation results is verified using the chip-scope tool with field-programmable gate array (FPGA) results. The comparative results for PRESENT block cipher with existing PRESENT ciphers and other light-weight algorithms are analyzed with resource improvements. The proposed secured authentication work is compared with similar RFID-mutual authentication (MA) approaches with better chip area and frequency improvements.</span>

Smart transportation network development with environmental issues into consideration has brought Industry 4.0 based solutions on priority. In this direction, battery-powered electric bus systems have been considered widely for ensuring flexibility, operation cost, and lesser pollutants emission. Industry 4.0 provides automation through a cyber-physical system (CPS), the interconnection of bus system entities with industrial internet-of-things (IIoT), remote information availability through cloud computing and scientific disciplines (human-computer interaction, artificial intelligence, machine learning etc.) integration. In this work, a discrete event-based simulation-optimization approach is integrated that take care of bus energy consumption according to real-time city's passenger needs and on-road friction levels. The proposed simulation optimization methodology utilizes multi-objective with dependent and independent variables for optimizing the overall system performance. In simulation optimization, objective functions are designed to tackle battery consumption, Internet-of-Thing (IoT) network performance, cloud operations efficiency and smart scientific discipline integration. Simulation parameters are based on a real-time bus system which is further analyzed, filtered and adapted as per the needs of the system. In another analysis, supercharger's capacities are varied to evaluate the performance of the proposed system and identify the low cost and efficient smart transportation system. Simulation results show different scenarios for variations in the number of buses, charging stations, bus-depots, mobile charging facilities, and bus-schedules. Simulation results show that the average passenger's waiting time in the waiting is (after ticket booking) varies between 0.2 minutes to 0.7 minutes in real-time traffic conditions. In similar traffic conditions, total passenger's time in system (ticket booking to travel) varies between 41.6 minutes (for 24 hours) to 45.5 minutes (for 1 year). In the simulation, priorities are given to those dependent and independent variables which save the battery consumption and elongate the utilization of buses. Lastly, it is also observed that the proposed system is suitable for resource-constraint devices because Gate Equivalent (GE) calculation shows that the proposed system can be implemented between 1986 GEs (communicational cost without confidentiality and authentication) and 7939 GEs (computational cost with HMAC for authentication in data storage). This ensures varies security primitivs such as confidentiality, availability and authentication.

Recent developments in the field of cyber physical systems (CPS) and internet of things (IoT) open up new possibilities in manufacturing. CPS and IoT represent enabling means for facilitating the companies’ adaptation to the ever-changing market needs and adoption of individualized manufacturing paradigm. It is foreseen that implementation of CPS and IoT will lead to new industrial revolution known as Industry 4.0. The fourth industrial revolution will bring about the radical changes in manufacturing process control through distribution of control tasks to intelligent devices. On the other hand, over the last decades International Electrotechnical Commission invested significant efforts in generation of the standard IEC 61499 for distributed automation systems. In this paper we provide the outline of the interconnection of IEC 61499 standard and Reference Architecture Model Industrie 4.0 in cyber physical production systems. The findings of the paper are illustrated using a realistic case study—an example of pneumatic manipulator that is made of CPS devices.

This paper compares ASIC and FPGA implementations of two commonly used architectures for 2-dimensional discrete cosine transform (DCT), the parallel and folded architectures. The DCT has been designed for sizes 4x4, 8x8, and 16x16, and implemented on Silterra 180nm ASIC and Xilinx Kintex Ultrascale FPGA. The objective is to determine suitable low energy architectures to be used as their characteristics greatly differ in terms of cells usage, placement and routing methods on these platforms. The parallel and folded DCT architectures for all three sizes have been designed using Verilog HDL, including the basic serializer-deserializer input and output. Results show that for large size transform of 16x16, ASIC parallel architecture results in roughly 30% less energy compared to folded architecture. As for FPGAs, folded architecture results in roughly 34% less energy compared to parallel architecture. In terms of overall energy consumption between 180nm ASIC and Xilinx Ultrascale, ASIC implementation results in about 58% less energy compared to the FPGA.

The growing requirement for the rise of production, quality, and efficiency of industrial products drives humans to jointly develop novel technologies capable of following up with the exponential technology growth they are facing today in production processes. In the 21st century, industrial internet of things (IIoT) is dedicated to endorsing the internet of things (IoT) to allow the interconnection of anywhere, any time, and anything to enhance efficiency, productivity, intelligence, and safety in the manufacturing system. Consequently, the combined IoT and cyber physical system (CPS) in IIoT will have an influence on industrial techniques through the industrial 4.0 confluence to encourage connected factories. CPS effectively combines physical and cyber components employing modern components such as sensors, network, and computing technologies. But various securities challenges rising in the CPS, like increasing cyberattacks due to the increase in IoT devices, modelling of security threads, CPS vulnerabilities assessment development techniques, and designing of fault-tolerant architectures, motivate new technologies to meet CPS requirements in order to offer security, confidentiality, and reliability of users’ data. Thus, this chapter presents the classification of various existing studies based on CPS security in terms of IIoT applications. Also, it provides the limitations, shortcomings, CPS architectures, and future potential applications to help researchers in the context of practical work.

With increased Internet of Things (IoT) devices, complexity and protection are more challenging. Lightweight cryptographic algorithms are secure and suitable for limited-resource environments; however, their hash functions provide encrypted data but not integrity. Strong security features are available, but setup is difficult and expensive. Network security mechanisms increase power consumption and latency. As IoT networks grow, managing cryptographic keys and securely authenticating large numbers of devices become complex tasks. Efficient key management strategies are required to ensure the scalability required. Existing state-of-the-art solutions lack standardization, scalability, complex and costly. Thus, this research proposes a secure solution for IoT resource-constrained devices, combining strong data integrity and lightweight encryption, and is thus named a hybrid. This hybrid approach integrates SHA-512 and the present cipher in our proposed approach and thus ensuring higher security than state-of-the-art models. This intelligent combination not only enhances the algorithm’s resistance against cryptographic attacks but also improves its processing speed. The proposed approach is used to reduce the processing time for encryption in the IoT platform and to preserve the trade-off between security and efficiency. In terms of memory use, execution time, and precision, the proposed approach is compared with recent state-of-the-art research. The experimental results indicate that our approach is efficient using the avalanche, authentication success rate, collision events, and execution time. The efficiency is 53% to 65%, and the avalanche effect indicates sensitivity to input variations, suggesting moderate-to-considerable reactivity to small data changes. The experimental tests conducted across 10,000 and 80,000 runs reveal no collisions and found that the proposed approach is resilient in managing unique IDs. Moreover, our approach performs consistently, with an average execution time of 0.088246 s, ranging from 0.075954 to 0.094583 s. Finally, our approach provides a practical and scalable solution for securing IoT devices in resource-constrained environments, addressing practical problems for IoT devices.

The internet of things (IoT) is now an in-demand technology that has been adopted in various applications and includes various embedded devices, sensors and other objects connected to the Internet. Due to the rapid development of this technology, it covers a significant portion of the research interests nowadays. IoT devices are typically designed for collecting different types of data from various sources and transmitting them in digitized form. However, data security is the burning issue in the IoT technology, which can broadly impact the privacy of crucial data. In this regard, a new lightweight encryption method called LRBC has been proposed in this work for resource constraint IoT devices which can provide data security at the sensing level. The LRBC has used the structural advantages of both substitution–permutation network (SPN) and Feistel structure together to achieve better security. Furthermore, the proposed method has been tested on NEXYS 4 DDR FPGA (Artix-7) trainer kit and implemented for application specific integrated circuit (ASIC) chip on TSMC 65 nm technology. The proposed algorithm consumes very less power of 11.40 μW and occupies a 258.9 GE (Gate Equivalent) area. Besides, a thorough security analysis shows that the proposed scheme ensures high security against various attacks with robustness. Moreover, the average avalanche effect of LRBC is found to be 58% and 55.75% concerning plaintext and key, respectively.

This article conducts a literature review of current and future challenges in the use of artificial intelligence (AI) in cyber physical systems. The literature review is focused on identifying a conceptual framework for increasing resilience with AI through automation supporting both, a technical and human level. The methodology applied resembled a literature review and taxonomic analysis of complex internet of things (IoT) interconnected and coupled cyber physical systems. There is an increased attention on propositions on models, infrastructures and frameworks of IoT in both academic and technical papers. These reports and publications frequently represent a juxtaposition of other related systems and technologies (e.g. Industrial Internet of Things, Cyber Physical Systems, Industry 4.0 etc.). We review academic and industry papers published between 2010 and 2020. The results determine a new hierarchical cascading conceptual framework for analysing the evolution of AI decision-making in cyber physical systems. We argue that such evolution is inevitable and autonomous because of the increased integration of connected devices (IoT) in cyber physical systems. To support this argument, taxonomic methodology is adapted and applied for transparency and justifications of concepts selection decisions through building summary maps that are applied for designing the hierarchical cascading conceptual framework.

The underlying vision of the internet of things (IoT) is to create a world where the real and the virtual realms are converging to create smart environments that makes energy, transport, cities, and many other areas more intelligent. With the IoT, the physical world is being interfaced through the things to the virtual world in heterogeneous environment. In heterogeneous environment, privacy and security are the major challenges. The secure information exchange is most critical pitfall to ensure the system security. This chapter gives a detailed analysis of cryptographic algorithms in IoT. A comparison of lightweight cryptography algorithms on basis of block size, key size, gate equivalents, and throughput is given. Moreover, the various security issues in IoT are discussed along with possible solution.

The Internet of Things (IoT) paradigm is gradually finding its way in virtually every industry; however, beyond adding more sensors and measuring and controlling previously inaccessible domains, it is also about transforming ‘legacy’ approaches to control systems, such as those used in Building Management Systems (BMS), by leveraging on the advantages brought by Cyber Physical Systems (CPS). The purpose of this paper is to address several issues gradually emerging in the process of applying the CPS and IoT paradigms to revolutionise BMS. The results of this on-going research aim to help avoid potential pitfalls and provide a sound platform for taking advantage of the benefits brought by this technology in a feasible, effective and controlled manner. More specifically, the paper will address i) the changing meaning of interoperability in the context of the explosion in the number of IoT devices, ii) the need for guidance in adopting sustainable CPS and IoT platforms supporting BMS, based on appropriate non-functional and viable systems principles, iii) emerging issues in the BMS ‘cloudification’ endeavour and iv) the lack of data sources’ correlation resulting in sub-optimal data quality and detail in using Big Data technologies to enable effective analytics for prompt BMS decision-making.

The Internet of Things (IoT) is a constantly growing environment for connecting hardware, software, physical things, and communicating devices altogether or individually over a network with or without human interventions. It collects, computes, and exchanges data together. This quality of IoT makes the platform flexible for the variety of applications that work on this technology to get incredible benefits, including healthcare domains. In the olden days, the medical system does not have any digital file system, clinical data monitoring, and cyber-physical systems. Cyber Physical System (CPS) is the nucleus of IoT. The smart parameters of IoT create an interesting thing on the Internet of Healthcare System (IoHT) and keep the best place in revenue. Apart from smart homes, cities, and smart devices, IoT established a vital position in IoT. The security and the privacy of Healthcare data should be managed properly. Thus, making a new concept into it called, “Blockchain.” This not only marks its step in cryptocurrencies, but it also tights the security and privacy of all types of data, and it supports heterogeneous applications, especially IoT-based applications. This article describes the Blockchain-IoT-based healthcare applications, security of the Internet of Medical Things (IoMT), and the future direction in the healthcare system based on Blockchain.

Light weight cryptography is a technology for providing the security solutions for the hardware systems where there is no computational resource or limited resource. PRESENT and HIGHT are a class of lightweight block ciphers which uses two different ways of computational structure for cipher generation. The paper presents the design and FPGA implementation of the two cryptographic structures PRESENT and HIGHT. A new hardware architecture design has been developed here for both PRESENT and HIGHT. A comparative analysis of the presented designs PRESENT and HIGHT have been done with the existing designs. A significant design optimization has been achieved for HIGHT and a significant throughput has been achieved for PRESENT.

Recently, vast investments have been made worldwide in developing Cyber-Physical Systems (CPS) as solutions to key socio-economic challenges. The Internet-of-Things (IoT) has also enjoyed widespread adoption, mostly for its ability to add “sensing” and “actuation” capabilities to existing CPS infrastructures. However, attention must be paid to the impact of IoT protocols on the dependability of CPS infrastructures. We address the issues of CPS dependability by using an epidemic model of the underlying dynamics within the CPS’ IoT subsystem (CPS-IoT) and an interference-aware routing reconfiguration. These help to efficiently monitor CPS infrastructure—avoiding routing oscillation, while improving its safety. The contributions of this paper are threefold. Firstly, a CPS orchestration model is proposed that relies upon: (i) Inbound surveillance and outbound actuation to improve dependability and (ii) a novel information diffusion model that uses epidemic states and diffusion sets to produce diffusion patterns across the CPS-IoT. Secondly, the proposed CPS orchestration model is numerically analysed to show its dependability for both sensitive and non-sensitive applications. Finally, a novel interference-aware clustering protocol called “INMP”, which enables network reconfiguration through migration of nodes across clusters, is proposed. It is then bench-marked against prominent IoT protocols to assess its impact on the dependability of the CPS.

Recent lightweight block cipher competition (FELICS Triathlon) evaluates efficient implementations of block ciphers for Internet of things (IoT) environment. In the competition, the implementation of HIGHT block cipher achieved the most efficient lightweight block cipher, in terms of code size (ROM), memory (RAM), and execution time. In this paper, we further investigate lightweight features of HIGHT block cipher and present the optimized implementations of both software and hardware for low-end IoT platforms, including resource-constrained devices (8-bit AVR and 32-bit ARM Cortex-M3) and application-specific integrated circuit (ASIC). By using proposed optimization methods, the implemented HIGHT block cipher shows better performance compared to previous state-of-the-art implementations.