ADPL: Adaptive Dual Path Learning for Domain Adaptation of Semantic Segmentation.

This paper addresses the problem of land-cover map updating by classification of multitemporal remote-sensing images in the context of domain adaptation (DA). The basic assumptions behind the proposed approach are twofold. The first one is that training data (ground reference information) are available for one of the considered multitemporal acquisitions (source domain) whereas they are not for the other (target domain). The second one is that multitemporal acquisitions (i.e., target and source domains) may be characterized by different sets of classes. Unlike other approaches available in the literature, the proposed DA Bayesian classifier based on maximum a posteriori decision rule (DA-MAP) automatically identifies whether there exist differences between the set of classes in the target and source domains and properly handles these differences in the updating process. The proposed method was tested in different scenarios of increasing complexity related to multitemporal image classification. Experimental results on medium-resolution and very high resolution multitemporal remote-sensing data sets confirm the effectiveness and the reliability of the proposed DA-MAP classifier.

In this work, we introduce a new concept, named source-free open compound domain adaptation (SF-OCDA), and study it in semantic segmentation. SF-OCDA is more challenging than the traditional domain adaptation but it is more practical. It jointly considers (1) the issues of data privacy and data storage and (2) the scenario of multiple target domains and unseen open domains. In SF-OCDA, only the source pre-trained model and the target data are available to learn the target model. The model is evaluated on the samples from the target and unseen open domains. To solve this problem, we present an effective framework by separating the training process into two stages: (1) pre-training a generalized source model and (2) adapting a target model with self-supervised learning. In our framework, we propose the Cross-Patch Style Swap (CPSS) to diversify samples with various patch styles in the feature-level, which can benefit the training of both stages. First, CPSS can significantly improve the generalization ability of the source model, providing more accurate pseudo-labels for the latter stage. Second, CPSS can reduce the influence of noisy pseudo-labels and also avoid the model overfitting to the target domain during self-supervised learning, consistently boosting the performance on the target and open domains. Experiments demonstrate that our method produces state-of-the-art results on the C-Driving dataset. Furthermore, our model also achieves the leading performance on CityScapes for domain generalization.

Unsupervised domain adaptation aims to transfer knowledge from labeled source domain to unlabeled target domain. Recently, multisource domain adaptation (MDA) has begun to attract attention. Its performance should go beyond simply mixing all source domains together for knowledge transfer. In this article, we propose a novel prototype-based method for MDA. Specifically, for solving the problem that the target domain has no label, we use the prototype to transfer the semantic category information from source domains to target domain. First, a feature extraction network is applied to both source and target domains to obtain the extracted features from which the domain-invariant features and domain-specific features will be disentangled. Then, based on these two kinds of features, the named inherent class prototypes and domain prototypes are estimated, respectively. Then a prototype mapping to the extracted feature space is learned in the feature reconstruction process. Thus, the class prototypes for all source and target domains can be constructed in the extracted feature space based on the previous domain prototypes and inherent class prototypes. By forcing the extracted features are close to the corresponding class prototypes for all domains, the feature extraction network is progressively adjusted. In the end, the inherent class prototypes are used as a classifier in the target domain. Our contribution is that through the inherent class prototypes and domain prototypes, the semantic category information from source domains is transformed into the target domain by constructing the corresponding class prototypes. In our method, all source and target domains are aligned twice at the feature level for better domain-invariant features and more closer features to the class prototypes, respectively. Several experiments on public data sets also prove the effectiveness of our method.

In the absence of the labeled samples in a domain referred to as target domain, Domain Adaptation (DA) techniques come in handy. Generally, DA techniques assume there are available source domains that share similar predictive function with the target domain. Two core challenges of DA typically arise, variance that exists between source and target domains, and the inherent source hypothesis bias. In this paper, we first propose a Stability Transfer criterion for selecting relevant source domains with low variance. With this criterion, we introduce a TARget learning Assisted by Source Classifier Adaptation (TARASCA) method to address the two core challenges that have impeded the performances of DA techniques. To verify the robustness of TARASCA, extensive experimental studies are carried out with comparison to several state-of-the-art DA methods on the real-world Sentiment and Newsgroups datasets, where various settings for the class ratios of the source and target domains are considered.

When deep neural networks are deployed in a highly automated vehicle for environment perception tasks in an unseen (target) domain that differs from the training (source) domain, the mismatch will result in decreased performance. Domain adaptation methods aim at overcoming this mismatch. Many recently investigated methods for unsupervised domain adaptation train a model using labeled source data and unlabeled target data at the same time. These methods assume that data from the target domain is available during the source domain training, which is not always the case in real applications. In this paper we present a way to perform an online style transfer for continual domain adaptation which improves performance on (multiple) unseen target domains using a given perception model. The approach is based on an image style transfer in the frequency domain and requires neither an adjustment of the given source-trained model parameters to the target domain, nor does it require any considerable amount of memory for storing its frequency domain representation of the source domain style, which is particularly important considering the hardware limitations in an autonomous vehicle.

Multisource unsupervised domain adaptation (MUDA) is an important and challenging topic for target classification with the assistance of labeled data in source domains. When we have several labeled source domains, it is difficult to map all source domains and target domain into a common feature space for classifying the targets well. In this article, a new progressive multisource domain adaptation network (PMSDAN) is proposed to further improve the classification performance. PMSDAN mainly consists of two steps for distribution alignment. First, the multiple source domains are integrated as one auxiliary domain to match the distribution with the target domain. By doing this, we can generally reduce the distribution discrepancy between each source and target domains, as well as the discrepancy between different source domains. It can efficiently explore useful knowledge from the integrated source domain. Second, to mine assistance knowledge from each source domain as much as possible, the distribution of the target domain is separately aligned with that of each source domain. A weighted fusion method is employed to combine the multiple classification results for making the final decision. In the optimization of domain adaption, weighted hybrid maximum mean discrepancy (WHMMD) is proposed, and it considers both the interclass and intraclass discrepancies. The effectiveness of the proposed PMSDAN is demonstrated in the experiments comparing with some state-of-the-art methods.

In many real-world applications, the domain of model learning (referred as source domain) is usually inconsistent with or even different from the domain of testing (referred as target domain), which makes the learnt model degenerate in target domain, i.e., the test domain. To alleviate the discrepancy between source and target domains, we propose a domain adaptation method, named as Bi-shifting Auto-Encoder network (BAE). The proposed BAE attempts to shift source domain samples to target domain, and also shift the target domain samples to source domain. The non-linear transformation of BAE ensures the feasibility of shifting between domains, and the distribution consistency between the shifted domain and the desirable domain is constrained by sparse reconstruction between them. As a result, the shifted source domain is supervised and follows similar distribution as target domain. Therefore, any supervised method can be applied on the shifted source domain to train a classifier for classification in target domain. The proposed method is evaluated on three domain adaptation scenarios of face recognition, i.e., domain adaptation across view angle, ethnicity, and imaging sensor, and the promising results demonstrate that our proposed BAE can shift samples between domains and thus effectively deal with the domain discrepancy.

Domain adaptation has achieved promising results in many areas, such as image classification and object recognition. Although a lot of algorithms have been proposed to solve the task with different domain distributions, it remains a challenge for multi-source unsupervised domain adaptation. In addition, most of the existing algorithms learn a classifier on the source domain and predict the labels for the target data, which indicates that only the knowledge derived from the hyperplane is transferred to the target domain and the structure information is ignored. In light of this, we propose a novel algorithm for multi-source unsupervised domain adaptation. Generally speaking, we aim to preserve the whole structure from source domains and transfer it to serve the task on the target domain. The source and target data are put together for clustering, which simultaneously explores the structures of the source and target domains. The structure-preserved information from source domain further guides the clustering process on the target domain. Extensive experiments on two widely used databases on object recognition and face identification show the substantial improvement of our proposed approach over several state-of-the-art methods. Especially, our algorithm can take use of multi-source domains and achieve robust and better performance compared with the single source domain adaptation methods.

Joint predictive model and representation learning for visual domain adaptation

The ability of supervised image analysis methods to provide state-of-the-art performance is limited by availability of high-quality labeled data in large quantities. Domain adaptation approaches propose a solution to this problem by leveraging quality labeled information from auxiliary data sources. In this work, we use adversarial learning for domain adaptation for remote sensing applications. First, we approached the problem of unavailable target domain labels with unsupervised domain adaptation and then extended our method for semisupervised domain adaptation to use a few available labels as well. We are using adversarial learning to extract discriminative target domain features that are aligned with source domain. We test our framework for two very different applications of remote sensing imagery, multiclass classification in hyperspectral images and semantic segmentation in large scale satellite images. For hyperspectral image analysis two datasets were used: the University of Houston shadow data was used for quantifying the efficacy of our approach to varying illumination, and the Botswana data was used to quantify the efficacy of our approach under multitemporal spectral shifts. Multisensor high-resolution images from National Agriculture Imagery Program and SpaceNet-Rio datasets were used as the source and target for the task of building extraction for large scale semantic segmentation based domain adaptation.

Recent progress in machine learning has been mainly due to the availability of large amounts of annotated data used for training complex models with deep architectures. Annotating this training data becomes burdensome and creates a major bottleneck in maintaining machine-learning databases. Moreover, these trained models fail to generalize to new categories or new varieties of the same categories. This is because new categories or new varieties have data distribution different from the training data distribution. To tackle these problems, this thesis proposes to develop a family of transfer-learning techniques that can deal with different training (source) and testing (target) distributions with the assumption that the availability of annotated data is limited in the testing domain. This is done by using the auxiliary data-abundant source domain from which useful knowledge is transferred that can be applied to data-scarce target domain. This transferable knowledge serves as a prior that biases target-domain predictions and prevents the target-domain model from overfitting. Specifically, we explore structural priors that encode relational knowledge between different data entities, which provides more informative bias than traditional priors. The choice of the structural prior depends on the information availability and the similarity between the two domains. Depending on the domain similarity and the information availability, we divide the transfer learning problem into four major categories and propose different structural priors to solve each of these sub-problems. This thesis first focuses on the unsupervised-domain-adaptation problem, where we propose to minimize domain discrepancy by transforming labeled source-domain data to be close to unlabeled target-domain data. For this problem, the categories remain the same across the two domains and hence we assume that the structural relationship between the source-domain samples is carried over to the target domain. Thus, graph or hyper-graph is constructed as the structural prior from both domains and a graph/hyper-graph matching formulation is used to transform samples in the source domain to be closer to samples in the target domain. An efficient optimization scheme is then proposed to tackle the time and memory inefficiencies associated with the matching problem. The few-shot learning problem is studied next, where we propose to transfer knowledge from source-domain categories containing abundantly labeled data to novel categories in the target domain that contains only few labeled data. The knowledge transfer biases the novel category predictions and prevents the model from overfitting. The knowledge is encoded using a neural-network-based prior that transforms a data sample to its corresponding class prototype. This neural network is trained from the source-domain data and applied to the target-domain data, where it transforms the few-shot samples to the novel-class prototypes for better recognition performance. The few-shot learning problem is then extended to the situation, where we do not have access to the source-domain data but only have access to the source-domain class prototypes. In this limited information setting, parametric neural-network-based priors would overfit to the source-class prototypes and hence we seek a non-parametric-based prior using manifolds. A piecewise linear manifold is used as a structural prior to fit the source-domain-class prototypes. This structure is extended to the target domain, where the novel-class prototypes are found by projecting the few-shot samples onto the manifold. Finally, the zero-shot learning problem is addressed, which is an extreme case of the few-shot learning problem where we do not have any labeled data in the target domain. However, we have high-level information for both the source and target domain categories in the form of semantic descriptors. We learn the relation between the sample space and the semantic space, using a regularized neural network so that classification of the novel categories can be carried out in a common representation space. This same neural network is then used in the target domain to relate the two spaces. In case we want to generate data for the novel categories in the target domain, we can use a constrained generative adversarial network instead of a traditional neural network. Thus, we use structural priors like graphs, neural networks and manifolds to relate various data entities like samples, prototypes and semantics for these different transfer learning sub-problems. We explore additional post-processing steps like pseudo-labeling, domain adaptation and calibration and enforce algorithmic and architectural constraints to further improve recognition performance. Experimental results on standard transfer learning image recognition datasets produced competitive results with respect to previous work. Further experimentation and analyses of these methods provided better understanding of machine learning as well.

Dual contrastive universal adaptation network for multi-source visual recognition

We study the problem of visual question answering (VQA) in images by exploiting supervised domain adaptation, where there is a large amount of labeled data in the source domain but only limited labeled data in the target domain, with the goal to train a good target model. A straightforward solution is to fine-tune a pre-trained source model by using those limited labeled target data, but it usually cannot work well due to the considerable difference between the data distributions of the source and target domains. Moreover, the availability of multiple modalities (i.e., images, questions and answers) in VQA poses further challenges in modeling the transferability between various modalities. In this paper, we address the above issues by proposing a novel supervised multi-modal domain adaptation method for VQA to learn joint feature embeddings across different domains and modalities. Specifically, we align the data distributions of the source and target domains by considering those modalities both jointly and separately. Extensive experiments on the benchmark VQA 2.0 and VizWiz datasets demonstrate that our proposed method outperforms the existing state-of-the-art baselines for open-ended VQA in this challenging domain adaptation setting.

Domain-transfer learning is a machine learning task to explore a source domain data set to help the learning problem in a target domain. Usually, the source domain has sufficient labeled data, while the target domain does not. In this paper, we propose a novel domain-transfer convolutional model by mapping a target domain data sample to a proxy in the source domain and applying a source domain model to the proxy for the purpose of prediction. In our framework, we firstly represent both source and target domains to feature vectors by two convolutional neural networks and then construct a proxy for each target domain sample in the source domain space. The proxy is supposed to be matched to the corresponding target domain sample convolutional representation vector well. To measure the matching quality, we proposed to maximize their squared-loss mutual information (SMI) between the proxy and target domain samples. We further develop a novel neural SMI estimator based on a parametric density ratio estimation function. Moreover, we also propose to minimize the classification error of both source domain samples and target domain proxies. The classification responses are also smoothened by manifolds of both the source domain and proxy space. By minimizing an objective function of SMI, classification error, and manifold regularization, we learn the convolutional networks of both source and target domains. In this way, the proxy of a target domain sample can be matched to the source domain data and thus benefits from the rich supervision information of the source domain. We design an iterative algorithm to update the parameters alternately and test it over benchmark data sets of abnormal behavior detection in video, Amazon product reviews sentiment analysis, etc.

In this paper, we propose a new unsupervised domain adaptation method for document classification. We address the problem of domain adaptation for document classification where the source and target domains do not differ significantly and there is no labeled data in the target domain. In this case, we can use conventional semi-supervised learning. Thus, we use the naive Bayes-based expectation-maximization method (NBEM) which is very effective for document classification. However, NBEM does not utilize the difference between a source domain and a target domain. We combine NBEM with the feature weighted method for domain adaptation, referred to as “self-training feature weight” (STFW). Our proposed method alternately uses NBEM and STFW to gradually improve document classification precision for a target domain. This method significantly outperforms the conventional unsupervised methods for domain adaptation.