An improvement method for circular synthetic aperture radar imaging

As important man-made targets, bridges have been a major focus of Synthetic Aperture Radar (SAR) image interpretation, and many researchers have developed methods for bridge detection. The core frameworks of these methods are analogical, a river is first extracted, and a water bridge is detected based on the positional relationship between the river and bridge. However, existing bridge detection methods relying on river extraction; cannot be utilized detect land bridges. This is because the background environment under a bridge is land, not river, which has different scattering characteristics and shape layouts. As such, the traditional method for extracting rivers is not suitable for extracting land background, and it is impossible to locate a bridge based on prior knowledge of its location of. To resolve this problem, in this study, we propose a land bridge detection method based on polarized Circular SAR (CSAR) images. In our proposed method, the Circular Polarization Entropy (CPE) of an observed scene is introduced to separate possible bridge targets from a land background (In our experiment, the average CPE of the bridge is 0.4018, and that of the land background is 0.7819; thus there is a clear difference between the bridge and background). False targets are removed based on the difference in the polarization entropy variance features of the bridges and other ground objects; and the size characteristics of the bridges. Finally, accurate extractions of land bridges are obtained based on the geometric characteristics of the bridges. Experimental results based on real airborne L-band polarized CSAR data verify the correctness of the theoretical analysis and effectiveness of the proposed method.

In this article, we propose a novel method of estimation of crack orientation on a metallic surface using linearly polarized circular synthetic aperture radar (SAR) imaging. We modeled a crack using a thin linear scatterer and considered the rotation of polarization basis vectors that were designed to match a predefined orientation vector corresponding to a temporary estimate of the orientation of the linear scatterer. The radar image intensity was expected to be a maximum when the specified orientation vector exactly matched the true scatterer orientation angle; therefore, to estimate the orientation of the scatterer, we aimed to obtain the maximum intensity of the image by varying the orientation vector. We validated the proposed scheme of estimation via a numerical electromagnetic simulation using the method of moments (MoM) and laboratory measurements carried out in an anechoic chamber. In this experiment, a metallic plate with slits was used as a simple surface crack model and the root mean square error and maximum error of the angular estimation were 1.9-degree and 5.1-degree, respectively.

Circular synthetic aperture radar (CSAR) has attracted much attention in the field of high-resolution SAR imaging. However, the CSAR image focusing is affected by the motion deviations of platform. In the processing of experimental CSAR data to deal with motion errors, the main way is using setup calibrators, which restricts its widespread applications. In this paper, based on the estimation of motion errors, an autofocus CSAR imaging strategy is proposed without using any setup calibrator. The first step is to split the entire aperture into several subapertures, the second step is to process the data in subapertures with an autofocus backprojection method, and the last step is to obtain the final CSAR image by merging the subimages obtained from the subaperture processing. The CSAR data processing results prove that the proposed strategy can remove the motion errors accurately and acquire well-focused CSAR images.

Circular synthetic aperture radar (SAR) imaging on the geosynchronous orbit has significant potential advantages, such as high resolution three-dimensional imaging, large coverage, but it also has challenges to overcome. One major problem limiting the high-resolution geosynchronous circular SAR (GEOCSAR) performances is the atmospheric effects including the tropospheric and ionospheric effects. In this study, the authors mainly consider the tropospheric effects on L-band GEOCSAR imaging. Since the integration time of GEOCSAR may be as long as 24 h, and the coverage can reach 1/3 of the Earth's surface, the effects of the spatial and temporal variation of the tropospheric refractive index cannot be ignored if well focused images are to be obtained. The analysis shows that the temporal variation of the tropospheric refractive index may cause severe degradation of the SAR images; the spatial variation of the refractive index and the tropospheric turbulence are not the important factor limiting the GEOCSAR imaging performance.

Circular synthetic aperture radar (CSAR) can obtain more complete scattering characteristics by observing the target with different azimuth angles. Therefore, extracting the complete structure of the target from CSAR images is of great significance for accurate interpretation. At present, the artificial target extraction based on CSAR images mostly uses anisotropic scattering features. For special targets such as buildings, as the walls and the ground form dihedral corner structures, there are also obvious strong scattering features such as double-scattering lines in SAR images. Therefore, combining the strong scattering features of buildings at specific aspects with anisotropic scattering characteristics at different aspects can obtain better extraction results, and how to extract these features accurately and efficiently is the key point. Based on this, this paper proposes a novel method for building contour extraction based on CSAR images. For strong scattering features, a fast fuzzy C-means (FCM) clustering algorithm was used to extract them. For anisotropic scattering features, aspect entropy was used to characterize the anisotropy degree, and K-means clustering was combined to extract. Finally, a more accurate result is obtained by merging the two feature extraction results. In order to verify the effectiveness and practicability of the proposed method, a lot of measured data acquired by the self-developed airborne L-band and Ku-band CSAR systems were processed. The experiments show that, compared with state-of-the-art algorithms, the proposed method can obtain more accurate results in less time.

This paper proposes an automatic target recognition (ATR) method for synthetic aperture radar (SAR) images based on information-decoupled representation. A typical SAR image of a ground target can be divided into three parts: target region, shadow and background. From the aspect of SAR target recognition, the target region and shadow contain discriminative information. However, they also include some confusing information because of the similarities of different targets. The background mainly contains redundant information, which has little contribution to the target recognition. Because the target segmentation may impair the discriminative information in the target region, the relatively simpler shadow segmentation is performed to separate the shadow region for information decoupling. Then, the information-decoupled representations are generated, i.e., the target image, shadow and original image. The background is retained in the target image, which represents the coupling of target backscattering and background. The original image and generated target image are classified using the sparse representation-based classification (SRC). Then, their classification results are combined by a score-level fusion for target recognition. The shadow image is not used because of its lower discriminability and possible segmentation errors. To evaluate the performance of the proposed method, extensive experiments are conducted on the Moving and Stationary Target Acquisition and Recognition (MSTAR) dataset under both standard operating condition (SOC) and various extended operating conditions (EOCs). The proposed method can correctly classify 10 classes of targets with the percentage of correct classification (PCC) of 94.88% under SOC. With the PCCs of 93.15% and 75.03% under configuration variance and 45° depression angle, respectively, the superiority of the proposed is demonstrated in comparison with other methods. The robustness of the proposed method to both uniform and nonuniform shadow segmentation errors is validated with the PCCs over 93%. Moreover, with the maximum average precision of 0.9580, the proposed method is more effective than the reference methods on outlier rejection.

Target segmentation of synthetic aperture radar (SAR) images is one of the challenging problems in SAR image interpretation, which often serves as a processing step for SAR target recognition. Target segmentation tries to separate the target from the background thus eliminating the interference of background noises or clutters. However, the segmentation may also discard a part of the target characteristics and the target shadow which also contain discriminative information for target recognition. Then the tradeoff between interference elimination and discriminability loss will cause some effects on the target recognition. This paper aims to evaluate the influence of target segmentation on target recognition. Target recognition under standard operating condition (SOC) and several extended operating conditions (EOCs), i.e., depression angle variance and noise corruption, is conducted on the moving and stationary target acquisition and recognition (MSTAR) dataset using the original image and segmented target image, respectively. Moreover, the recognition performance under target segmentation errors is also evaluated. By comparing the recognition performance, the effects of target segmentation can be illustrated.

This article presents a synthetic aperture radar (SAR) imaging algorithm based on a compressed sensing (CS) reconstruction approach, which is suitable for the detection of foreign object debris (FOD) located in a multilayered circular dielectric structure for nondestructive testing (NDT) application. The method proposed considers the refraction model at the boundaries between each two adjacent layers. This method is different from free space as imaging background assumption in previous CS-based SAR imaging applications. In addition, the prior information that the FOD is displayed with a sparse distribution is applied. Therefore, the method proposed could obtain better focus on effectiveness than time-reversal imaging algorithm with the same measurement points. Further, the CST simulations and the experiment were conducted by taking two small metallic targets as FOD embedded in the three-layered circular dielectric structure. The results of simulations and experiment demonstrated that the proposed method has better effect than previous methods.

Attributed scattering center is one of important features of Synthetic Aperture Radar (SAR) image. In this paper, a method for the matching of attributed scattering centers and its application to SAR target recognition is proposed. First, the attributed scattering centers of the test SAR image and template SAR images are extracted on the basis of the attributed scattering model. Second, the Hungarian algorithm is employed to match the two scattering center sets. Based on the one to one correspondence, we design a new similarity measure to evaluate the similarity between the two scattering center sets that will decide the target type of the test image. The similarity measure considers the effects of each individual scattering center, single matching pair, and missing alarms and false alarms; thus, it is more comprehensive. The experiment based on moving and stationary target acquisition and recognition database demonstrates the validity of the proposed method.

Circular synthetic aperture radar (CSAR) has a 360° observation capability on the central observation scenario. A typical way to process CSAR imaging is to cut data into small sub-apertures because most targets are only coherent at a very small observation angle. There are many sub-aperture imaging methods after development in recent years. The back-projection algorithm is widely used because it is simple and can be applied to an arbitrary trajectory. Because of the limitation of the Nyquist sampling frequency and influence of the antenna sidelobe, azimuth ambiguity is a phenomenon that may occur in the radar imaging process. The existing researches typically choose the back-projection (BP) imaging area according to the SAR platform flight path and the antenna beam width. The limitation of the CSAR imaging area and its azimuth ambiguity region are rarely analyzed theoretically. This paper focus on the sub-aperture imaging of CSAR, based on the BP algorithm, which derives the relationship of azimuth ambiguity with CSAR parameters such as the pause repeat frequency (PRF), slant range angle, velocity of radar platform, etc. This paper proposes an equation for the calculation of the azimuth ambiguity region and analyzes the limitations, which provides theoretical support for CSAR parameter design, imaging area selection, and azimuth ambiguity analysis.

Synthetic aperture radar (SAR) target recognition under extended operating conditions (EOCs) is a challenging problem due to the complex application environment, especially for insufficient target variations and corrupted SAR images in the training samples. This paper proposes a new strategy to solve these problems for target recognition. The SAR images are firstly characterized by multi-scale components of monogenic signal. The generated monogenic features are decomposed to learn a class dictionary and a shared dictionary, which represent the possible intraclass variations information and the common information, respectively. Moreover, a sparse representation of the class dictionary and a dense representation of the shared dictionary are jointly employed to represent a query sample for classification. The validity of the proposed strategy is demonstrated with multiple comparative experiments on moving and stationary target acquisition and recognition (MSTAR) database.

Synthetic aperture radar (SAR) is able to form high-resolution images, which is beneficial for target identification and recognition. However, High-resolution SAR image formation is of immense computation, especially for large scene. In practice, the region of interest (ROI) that needs high resolution imaging may constitute only a small portion of the whole scene. Since ROI detection may only require image resolution much lower than the highest resolution that can be achieved from SAR data, it is efficient to generate an "adequately low resolution" image to find ROI. If target recognition is needed, full-resolution images can be generated for ROI. In this paper, a novel two-stage framework of SAR image formation and processing is developed. Fast factorized back-projection (FFBP) algorithm is introduced to generate SAR images recursively. The FFBP significantly reduces computation complexity with minimal loss in accuracy compared with traditional back-projection (BP) algorithm through recursive stages. At each stage the resolution of images is finer than previously. When the resolution is adequate for target detection, a detection procedure is processed to find ROI in the whole scene. Full resolution image for ROI is then generated by integrating the low resolution images. Moreover, since moving targets appear at different positions in the "adequately low-resolution" image series, moving targets can be also detected. Simulation results show that with single-pass high-resolution SAR data, the method generates low-resolution images quickly for ROI and moving target detection, and provides high-resolution details efficiently for ROI.

Deep Neural Networks (DNNs) based Synthetic Aperture Radar (SAR) Automatic Target Recognition (ATR) systems have shown to be highly vulnerable to adversarial perturbations that are deliberately designed yet almost imperceptible but can bias DNN inference when added to targeted objects. This leads to serious safety concerns when applying DNNs to high-stakes SAR ATR applications. Therefore, enhancing the adversarial robustness of DNNs is essential for applying DNNs to modern real-world SAR ATR systems. Toward building more robust DNN-based SAR ATR models, this article explores the domain knowledge of SAR imaging process and proposes a novel Scattering Model Guided Adversarial Attack (SMGAA) algorithm which can generate adversarial perturbations in the form of electromagnetic scattering response (called adversarial scatterers). The proposed SMGAA consists of two parts: 1) a parametric scattering model and corresponding imaging method and 2) a customized gradient-based optimization algorithm. First, we introduce the effective Attributed Scattering Center Model (ASCM) and a general imaging method to describe the scattering behavior of typical geometric structures in the SAR imaging process. By further devising several strategies to take the domain knowledge of SAR target images into account and relax the greedy search procedure, the proposed method does not need to be prudentially finetuned, and can efficiently find the effective ASCM parameters to fool the SAR classifiers and facilitate the robust model training. Comprehensive evaluations on the MSTAR dataset show that the adversarial scatterers generated by SMGAA are more robust to perturbations and transformations in the SAR processing chain than the currently studied attacks, and are effective to construct a defensive model against the malicious scatterers.

Recently, detecting the interesting target accurately in circular synthetic aperture radar (CSAR) images has become one of the most important research directions in the actual CSAR application. Due to the influence of the data acquisition mode, the size of the CSAR image is usually large. When the vehicle targets in the CSAR image are parked tightly, they usually cannot be detected well using the traditional detection methods. Therefore, a vehicle target detection method based on YOLOv5 in the CSAR image is proposed in this paper. Firstly, the image augmentation technique is used to solve the problem of the insufficient training samples, and then the data set is input to the model for training. Secondly, the test image is segmented, and then the trained model is used to detect the vehicle target respectively. Finally, the post-processing is used to optimize the detection results. The CSAR image based on the Gotcha dataset is used to verify the correctness of theoretical analysis and feasibility of the proposed method.

In circular synthetic aperture radar (CSAR), radar collects data over a circular trajectory. This wide-angle non-linear collection geometry makes CSAR capable of obtaining both two-dimensional (2D) high resolution image and three-dimensional (3D) image. In this paper, compressive sensing technique is used in 3D CSAR imaging. Not only echo samples used in imaging are greatly reduced, but also the imaging results are with good performance. However, the consumed time of reconstruction is very long. In order to overcome this problem, graphic process unit (GPU) is furtherly used in 3D compressive sensing CSAR imaging in this paper. Simulation results show that GPU can improve the efficiency of the 3D reconstruction.