Application of incremental support vector regression based on optimal training subset and improved particle swarm optimization algorithm in real-time sensor fault diagnosis

In the area of cloud computing load balancing, the Particle Swarm Optimization (PSO) algorithm is neoteric and now praised highly, but recently a more neoteric algorithm which deploys the classifier into load balancing is presented. Besides, an algorithm called red-black tree which is aiming at improving the efficiency of resource dispatching is also praised. But the 3 algorithms all have different disadvantages which cannot be ignored. For example, the dispatch efficiency of PSO algorithm is not satisfying; although classifier and red-black tree algorithm improve the efficiency of dispatching tasks, the performance in load balancing is not that good, as a result the improved PSO algorithm is presented. Some researches are designed to get the advantages of new algorithm. First of all, the time complexity and performance for each algorithm in theory are computed; and then actual data which are generated in experiments are given to demonstrate the performance. And from the experiment result, it can be found that for the speed of algorithm itself PSO is the lowest, and the improved PSO solve this problem in some degree; improved PSO algorithm has the best performance in task solving and PSO is the second one, the red-black and Naive Bayes algorithm are much slower; PSO and improved PSO algorithm perform well in load balancing, while the other two algorithms do not do well.

Standard Particle Swarm Optimization(PSO) algorithm falls into local optima easily and has low convergence accuracy when it is used to address the problem of complex functions optimization.In order to overcome the shortcomings,an improved PSO algorithm was proposed.The proposed algorithm integrated the attraction-repulsion mechanism in the field of biology into PSO algorithm and took full advantage of the mutual influence between particles to modify velocity updating formula,and thus maintained population diversity and enhanced the ability of particle to escape from the local optima.The experimental results demonstrate that the proposed algorithm outperforms two existing variants of the PSO algorithm in terms of convergence accuracy while improving the velocity of convergence in the later evolution phase and avoiding premature convergence problem effectively.

Improved particle swarm optimization algorithm with harmony search (IHPSO) is proposed in this paper. This algorithm takes particle swarm search direction estimation mechanism and harmony search (HS) approach to particle swarm optimization (PSO) algorithm, which increases the search capability of PSO algorithm considerably. The proposed algorithm initializes a new search with harmony pitch adjusting or random selection when PSO search direction is estimated incorrectly. This can provide further opportunities of finding better solutions for the particle swarm by guiding the entire particle swarm to promising new regions of the search space and accelerating the search. PSO, HPSO and IHPSO, as well as other advanced PSO procedures from the literature were compared on several benchmark test functions extensively. Statistical analyses of the experimental results indicate that the performance of IHPSO is better than the performance of PSO and HPSO.

The particle swarm optimization (PSO) algorithm is an intelligent optimization algorithm and has been successfully applied to many fields. However, it has the deficiencies of the poor search capability and the low calculation efficiency. To solve the problems, the genetic algorithm is introduced to improve the PSO algorithm in the paper. Then, three simulated examples were used to assess the ability of the improved PSO algorithm. The results showed that the improved PSO algorithm could jump out of the local minimum and achieve the better solution. Furthermore, the paper reveals that the improved PSO algorithm seems to be an improvement on the original PSO algorithm.

The partial shading of a photovoltaic array repeatedly occurs in the natural environment, which can cause a failure of a conventional maximum power point tracking (MPPT) algorithm. In this paper, the convergence conditions of the standard particle swarm optimization (PSO) algorithm are deduced by the functional analysis, and then the influence of the random variables and inertia factor of the algorithm on the trajectory in the particle swarm optimization is analyzed. Based on the analysis results, an improved particle swarm optimization (IPSO) algorithm, which adopts both global and local modes to locate the maximum power point, is proposed. Compared to the standard PSO algorithm, in the improved PSO algorithm, many random and interfered variables are removed, and the structure is optimized significantly. The proposed algorithm is first simulated in MATLAB to ensure its capability. The feasibility of the approach is validated through physical implementation and experimentation. Results demonstrate that the proposed algorithm has the capability to track the global maximum power point within 3.3 s with an accuracy of 99%. Compared with five recently developed Global MPPT algorithms, the proposed IPSO algorithm achieved better performance in the maximum power tracking in the partial shading conditions.

Ultra-high performance concrete has excellent mechanical properties such as ultra-high strength and high durability, and has a broad application prospect in the field of bridge engineering. To make full use of the superior mechanical properties of UHPC and reduce the cost of the bridge, the particle swarm optimization algorithm is used to optimize the structural design of the UHPC beam bridge; Aiming at the problem that the traditional particle swarm optimization algorithm is easy to fall into local optimum, the nonlinear adaptive weight update method is used to improve the particle swarm optimization algorithm. Based on the above-mentioned improved particle swarm optimization algorithm, the optimal design method of ordinary reinforced UHPC beams and prestressed UHPC beams with commonly used highway spans is studied. The reliability of the optimized structural limit state is analyzed by Monte Carlo (MC) importance sampling method. The results show that compared with the traditional particle swarm optimization algorithm, the improved particle swarm optimization algorithm has higher convergence speed and convergence accuracy. The optimal height-span ratio of ordinary reinforced UHPC beams decreases with the increase of the span, and the construction cost gradually increases; The optimal height-span ratio of the prestressed beam decreases first and then increases with the increase of the span, and the construction cost gradually increases. The calculation results of load capacity reliability indexes of optimization results are all higher than the target reliability indexes of similar components stipulated in China’s “Uniform Standard for Structural Reliability Design of Highway Engineering”.

Rational planning and layout of land types in urban and rural areas can realize the rational use of resources. This paper briefly introduces the optimization model of land allocation for urban and rural planning and uses a particle swarm optimization (PSO) algorithm to solve the land allocation scheme. At the same time, co-evolution was introduced into the PSO algorithm to improve its optimization performance. Then, Chongqing city was taken as an example to optimize the land allocation scheme. The results showed that the three algorithms optimized the land allocation scheme, and the improved PSO algorithm had the best optimization effect. In conclusion, the PSO algorithm optimized by the co-evolution concept can effectively optimize land allocation schemes.

Single-gear-ratio plug-in hybrid vehicles (SRPHEVs) are favored by major manufacturers due to their excellent energy-saving potential, simple structure, ease of maintenance and control, great cost-saving potential, and the benefits of vehicle lightweighting. Implementing an energy management strategy (EMS) is the key to realizing the energy-saving potential of PHEVs. In this paper, based on a newly developed coaxial configuration, P1-P3 SRPHEV, with the purpose of reducing PHEV fuel consumption, the advantages of various methods were synthesized. An improved intelligent optimization algorithm, the Particle Swarm Optimization (PSO) algorithm, was used to find the optimal rule-based strategy parameters. The PSO algorithm could be easily adjusted to the parameters and obtains the desired results quickly. Different long-distance speed profiles tested under real-world driving cycle (RDC) conditions were used to validate the fuel savings. And an energy flow analysis was conducted to further investigate the reasons for the algorithm optimization. The results show that the optimization plans of the PSO algorithm in different cycle conditions can improve the equivalent fuel consumption of vehicles in different long-distance conditions. Considering the optimization effect of the equivalent fuel consumption and actual fuel consumption, the best case of the equivalent fuel consumption is improved by 2.98%, and the actual fuel consumption is improved by 2.37%. Through the energy flow analysis, it is found that the energy-saving effect of the optimization plan lies in the following principle: lowering the parallel mode switching threshold to increase the parallel mode usage time and to reduce the fuel–mechanical–electrical transmission path loss, resulting in increasing the energy utilization of the whole vehicle.

Job-shop scheduling problem is a NP-hard complete. For some JSSP, even with moderate size, optimality can’t be guaranteed. Particle swarm optimization (PSO) algorithm has been developing rapidly and has been applied widely as it is easily understood and realized. This paper presents an improved particle swarm optimization algorithm (IPSO), which uses the dynamic inertia weight that decreases according iterative generation increasing to improve the performance of standard PSO. The proposed IPSO can be used to solve the traditional JSSP and the computational experiments show that the IPSO algorithm is more effective than GA and standard PSO algorithm for JSSP to minimize makespan.

This paper presents a hybrid approach based discrete Particle Swarm Optimization (PSO) and chaotic strategies for solving multi-objective task scheduling problem in cloud computing. The main purpose is to allocate the summited tasks to the available resources in the cloud environment with minimum makespan (i.e. schedule length) and processing cost while maximizing resource utilization without violating Service Level Agreement (SLA) among users and cloud providers. The main challenges faced by Particle Swarm Optimization (PSO) when used to solve scheduling problems are premature convergence and trapping into local optimum. This paper presents an enhanced Particle Swarm Optimization algorithm hybridized with Chaotic Map strategies. The proposed approach is called Enhanced Particle Swarm Optimization based Chaotic Strategies (EPSOCHO) algorithm. Our proposed approach suggests two Chaotic Map strategies: sinusoidal iterator and Lorenz attractor to enhanced PSO algorithm in order to get good convergence and diversity for optimizing the task scheduling in cloud computing. The proposed approach is simulated and implemented in Cloudsim simulator. The performance of the proposed approach is compared with the standard PSO algorithm, the improved PSO algorithm with Longest job to fastest processor (LJFP-PSO), and the improved PSO algorithm with minimum completion time (MCT-PSO) using different sizes of tasks and various benchmark datasets. The results clearly demonstrate the efficiency of the proposed approach in terms of makespan, processing cost and resources utilization.

The particle swarm optimization (PSO) algorithm presents a new way for finding optimal solutions of complex optimization problems. In this paper a modified particle swarm optimization algorithm is presented. We modify the PSO algorithm in some aspects. Firstly, a contractive factor is introduced to the position update equation, and the particles are limited in search region. A new strategy for updating velocity is then adopted, in which the velocity is weakened linearly. Thirdly, using an idea of intersecting two modified PSO algorithms. Finally, adding an item of integral control in the modified algorithm can improve its global search ability. Based on these strategies, we proposed a new PSO algorithm named crossed PSO algorithm. Simulation results show that the crossed PSO is superior to the original PSO algorithm and can get overall promising performance over a wide range of problems.

Although there are many methods or models widely applied to evaluate water resources carrying capacity, the evaluation result is qualitative not quantitative. In order to quantificationally evaluate groundwater carrying capacity in irrigation district, multi-objective evaluation model of groundwater carrying capacity was established, which includes four objectives, i.e., GDP, grain yield, population and COD emissions. The multi-objectives model can factually describe groundwater carrying capacity for social economy subsystem and ecological environment subsystem in irrigation district. The improved Particle Swarm Optimization (PSO) algorithm was built and adopted to solving the groundwater carrying capacity multi-objective model. In the improve PSO algorithm, linear inertia weight and chaos variation operator are employed to improve basic algorithm global searching capacity. The model was applied to quantificationally evaluate groundwater carrying capacity of People's Victory Canal irrigation district in current year and in 2010 level year.

Collaborative beamforming in wireless sensor networks using a novel particle swarm optimization algorithm variant

Neural Network system for SoC is one topic in the world. Recently, SoC began to combine AI technique by Python. When developers consider Intelligent system on SoC, the co-design software and hardware are significant. In this case, small devices and embedded system are target system. For IoT, those techniques will grow up in the world. Those cases, avoiding premature convergence while keeping performance is a challenge in training the neural network, especially in a case of large NNs or a large number of training data. In this case, one problem is a huge memory and processing power. For tiny memory and processing system as SoC, we propose an improved particle swarm optimization (PSO) algorithm called the PSOseed2 algorithm for training NN. The PSOseed2 algorithm solves the premature convergence of the standard PSO (SPSO) algorithm by slightly modifying the velocity update function without adding many computational tasks to the SPSO algorithm. We evaluated this algorithm on field programmable gate array (FPGA)-based NN and software-based NN and trained these NNs with different PSO algorithms that are SPSO, PSOseed, PSOseed2, and dissipative PSO. Experimental results with different datasets confirmed that the NNs trained by the proposed PSOseed2 algorithm had better recognition rates and lower global learning errors than the NN trained by other PSO algorithms. In this talk, I would like to talk those relational research in the world and our results and discussion.

Flatness error is an important factor for effective evaluation of surface quality. The existing flatness error evaluation methods mainly evaluate the flatness error of a small number of data points on the micro scale surface measured by CMM, which cannot complete the flatness error evaluation of three-dimensional point cloud data on the micro/nano surface. To meet the needs of nano scale micro/nano surface flatness error evaluation, a minimum zone method on the basis of improved particle swarm optimization (PSO) algorithm is proposed. This method combines the principle of minimum zone method and hierarchical clustering method, improves the standard PSO algorithm, and can evaluate the flatness error of nano scale micro/nano surface image data point cloud scanned by atomic force microscope. The influence of the area size of micro/nano surface topography data on the flatness error evaluation results is analyzed. The flatness evaluation results and measurement uncertainty of minimum region method, standard least squares method, and standard PSO algorithm on the basis of the improved PSO algorithm are compared. Experiments show that the algorithm can stably evaluate the flatness error of micro/nano surface topography point cloud data, and the evaluation result of flatness error is more reliable and accurate than standard least squares method and standard PSO algorithm.