Barriers to Using Mobile Devices in the Classroom

Internet access using mobile handheld devices has surpassed that of fixed Internet, but most web pages are designed for desktop browsers. Mobile devices have resource limitations. Consequently, web pages designed for desktop browsing cannot be well displayed on mobile devices. Thus, dynamically transforming web contents designed for desktops into contents which can be displayed in a mobile device is an important task. Various approaches of content adaptation have been proposed to achieve this goal, but no single content adaptation strategy has been found to be effective. On the other hand, e-learning contents have grown manifold over years. In this paper, we provide a framework for an e-learning content adaptation system that can be used with desktops and mobile devices seamlessly. We combine multiple content adaptation strategies to make e-learning contents appropriate for mobile devices. Among the various content adaptation strategies, the segmentation algorithm plays the most important role. Our experiments demonstrate that the proposed scheme can be successfully utilized for content adaptation in mobile and handheld devices.

The term Cloud has taken on a significant role in the computer industry and is now recognized as the forerunner of cutting-edge technology that makes possible an enormous variety of services and applications. Cloud computing servers are made up of a large resource pool that combines hardware and software that is readily available and serves users depending on demand, with pay-per-use consumers accessing services. Large amounts of resources that can be consolidated on an active network and cloud servers that can be distant users’ mobile handheld devices are both features of cloud services that may be offered to users. With the use of mobile device resources, this research suggests a novel method of cloud computing that would represent a ground-breaking development for the field. In this situation, virtualization technology may also be leveraged to benefit from the resources of mobile devices. Additionally, mobile devices can function as a backup virtual server for the cloud. Based on the outcomes of the relevant intelligent parameters, a dynamic optimization algorithm may categorize mobile devices that are linked to the cloud and operating as a part of it, and the result log would be stored in the server. Additionally, the log will act as the cloud’s main building block for effectively allocating and scheduling jobs to various types of categorized mobile devices based on the task’s complexity, which results in greater elasticity, flexibility, cost savings, and slick server performance. The potential solution adds a monetary incentive that is advantageous to both the service user and the service provider.

Mobile security is more and more important with the fast growth of mobile devices, and people are becoming more dependent on mobile devices in their daily life. Malicious samples in mobile devices are growing in double times each year from 2011 to 2017 in China. ISO/IEC 27000 family of standards helps organizations keep information assets secure, such as financial information, intellectual property, employee details or information entrusted to you by third parties. ISO/IEC 27001 is the best-known standard in the family providing requirements for an information security management system (ISMS). However, ISO/IEC 27001 is not quite adaptable for mobile devices, because these developing mobile information devices lead to new challenges and security risks. This paper analyzes mobile devices security issues, and gives the drawback for 27001 in mobile security. Finally, this paper gives a consideration to these issues under ISO/IEC 27001 information security management system framework.

Energy conservation in battery powered mobile devices that perform wireless multimedia streaming has been a significant research problem since last decade. This is because these mobile devices consume a lot of power while receiving, decoding and ultimately, presenting the multimedia content. What makes things worse is the fact that battery technologies have not evolved enough to keep up with the rapid advancement of mobile devices. This survey examines solutions that have been proposed during the last few years, to improve the energy efficiency of wireless multimedia streaming in mobile hand-held devices. We categorize the research work according to different layers of the Internet protocol stack they utilize. Then, we again regroup these studies based on different traffic scheduling and multimedia content adaptation mechanisms. The traffic scheduling category contains those solutions that optimize the wireless receiving energy without changing the actual multimedia content. The second category on the other hand, specifically modifies the content, in order to reduce the energy consumed by the wireless receiver and to decode and view the content. We compare them and provide evidence of the fact that some of these tactics already exist in modern smaprtphones and provide energy savings with real measurements. In addition, we discuss some relevant literature on the complementary problem of energy-aware multimedia delivery from mobile devices and contrast with our target approaches for multimedia transmission to mobile devices.

The image of a license plate is scanned by the camera attached to a mobile PDA device and the numbers on the plate are detected by the image processing parts in the proposed Mobile system. Then the numbers and the location of a mobile PDA device are encoded and transmitted along with the location information to a remote server through a wireless communication network. Finally, the server decodes the transmitted data as a text format and transmits it to the destination user. Consequently, this paper contributes a case study on the embedded system for designing of intelligent interface between a moving vehicle and a mobile PDA device, using a spatial relative distance scheme. The experimental results show that detection and tracking of a location of moving vehicle can be conducted efficiently with a mobile PDA device in real-time through wireless communication system and Internet.

<h3>ABSTRACT</h3> American Society for Microbiology Guidelines for Biosafety in Teaching Laboratories (2012) state that educators must use best practices to minimize risk of biohazard contamination to students. Integrating mobile digital devices into medical laboratory science (MLS) programs’ clinical training is potentially one means of reducing this risk. The purpose of this pilot project was to ascertain attitudes from students and clinical educators on using mobile devices as a laboratory benchside educational tool during clinical rotations as a novel alternative to paper materials. In this study, 3 senior-level MLS students used Apple iPads in concert with Google Drive in lieu of paper manuals during Hematology and Transfusion Medicine clinical rotations at Virginia Commonwealth University Health (VCUH). Two VCUH clinical educators from these laboratories also participated. All participants were trained on usage and access of electronic material on the iPads as well as proper cleaning of the devices. Prestudy surveys were used to assess attitudes toward mobile devices. Focus groups, for students and clinical educators, separately, were conducted after completion of the clinical rotations. The results of the study indicate that advantages of employing mobile devices include improvement of safety by eliminating transfer of paper worksheets from laboratory to the outside, ability to electronically monitor students’ progress through clinical laboratory rotations, and ease of accessibility to electronic references at the benchside. Information gained from this pilot study implies that mobile devices can be used to decrease contamination risk while serving as a state-of-the-art educational tool on the laboratory benchside. Potential applications of mobile devices within the clinical laboratory include: (1) recording and tracking instrument maintenance, (2) tracking personnel training and competences, and (3) tracking reagent inventory.

Grid computing using wireless networks is receiving increasing attention and is expected to become a critical part of future grid computing. However, the inherent challenges of mobile environments such as mobility management, disconnected operation, device heterogeneity, service discovery, and resource sharing are significant issues in mobile grid computing. To achieve the best performance in a mobile grid computing environment, the mobile devices with the lowest probability of mobility should be selected for use first. We therefore focus on the idle state of mobile devices and use IP-paging scheme to identify the idle mobile devices. For this, we propose a user-defined checkpoint technique for task migration, which is based on the information of when a mobile device will leave the network or stop due to low battery. Our checkpoint technique performs checkpoints by two conditions: when a mobile device leaves its current cell and when it turns off due to low battery capacity.KeywordsMobile GridIP-PagingTask MigrationCheckpoints

The use of mobile devices is increasingly popular. Mobile devices are increasingly equipped with advanced hardware and software technology. With dynamic performance and practical on mobile devices can master the development of the world ICT industry (information and communication technology). Software has become one of the spearheads of mobile success device. The creation of application programs is an important breakthrough in mobile development device. Likewise, the development of the Polyclinic Mobile Application in lecturer research This beginner is to provide solutions to problems that exist at the polyclinic at environment of PT. Eka Sandang Duta Prima Semarang, which is not yet supported by ICT, so in providing health services to the community, workers who are less than optimal can resolved. In developing the Polyclinic Mobile Application, it is not only a registration feature only, but there are several other features that were developed such as; polyclinic profile, schedule practice, modern queuing system, recording medical records, view patient history, take notes medical action, noting the drug administered.

In recent years, many computational techniques have been proposed to help specialists in the fracture reduction process. This field of research is open and faces important challenges due to its intrinsic high complexity. The reduction of a complex bone fracture requires identifying the bone fragments, to estimate their proper position and to select and place adequate fixation devices in order to stabilise the fracture. The development of computer-assisted techniques aids the planning and the execution of those tasks. In this paper, the possibilities of mobile and wearable devices in a fracture reduction process are introduced and discussed from a global perspective. Specifically, we have reviewed opportunities and challenges of mobile and wearable devices in the following stages of the treatment of a bone fracture: diagnosis, planning, training, aiding and rehabilitation. Regarding mobile devices, the focus is placed on the visualisation of medical data, the human–computer interaction-specific issues, collaborative aspects and augmented reality possibilities.

The value of a mobile communication device is its ability to organize and access important information quickly. Mobile devices are often associated with the cutting-edge technology of the last 4 years. Although having gained an increasing popularity over recent years, mobile devices have a history of 15 years. The first generation of mobile devices was the analog mobile phone. They were large and cumbersome, resembling a small briefcase. With the launch of the second generation, mobile phone units became smaller and easier to handle. Currently, third-generation phones are starting to be released, advancing in design and dynamic capabilities. By the year 2005, 76% of consumers will own an Internet compatible device, 66% will own a cell phone, 45% will own an Internet cell phone, and 10% will own a personal digitial assistant (Forrester, 2001). In today's information surge, business never stops. IDC Research has forecasted that an average of more than 36 billion person-to-person e-mails will be sent daily by 2005 (Juptner, 2001). Hence, mobile communication plays a major role in the success of most of today's business operations (Jones, 2001), and all businesses are continually faced with the challenge of engaging with the rapidly changing information technology age. One area of mobile communications that has been growing exponentially is mobile computing. Keywords: code division multiple access (CDMA); general packet radio service (GPRS); global positioning system (GPS); Internet cell phone; mobile communication device; personal digital assistant (PDA)

Recently, smart phones such as the Galaxy S and IPhone, and tablet PCs such as the Galaxy Tab have been introduced and become widespread in the market, thus the environment for wireless Internet services has been improving. As the market has improved, consumer preferences for mobile devices and the relationship between these devices and wireless Internet services regarding consumer preferences have become a very important issue. However, although there have been a considerable number of studies on the demand for mobile devices, it is not easy to find previous studies on the relationship between consumer preferences for specific attributes of wireless Internet services and the demand for mobile devices. The main purpose of this study is to analyze which mobile device is more likely to be preferred or become the main channel for wireless Internet services and how the demand for each mobile device is influenced by consumer preferences for specific attributes of wireless broadband Internet services used on it, and to induce managerial implications based on the main findings. To derive the results on consumer preferences, conjoint analysis is used. The survey was conducted using 1,000 Korean consumers. In the survey, respondents are allowed to choose more than one hypothetical alternative representing a mobile device combined with a certain type of wireless broadband Internet service if they desired. To estimate the consumer preferences quantitatively, a multivariate probit model is used. According to the estimation results, owing to their portability, smart phones are more likely to become a major channel for wireless Internet services despite their drawbacks in terms of display size and performance. Portability is the most important factor affecting the choice of a mobile device when using wireless Internet services. Therefore, manufacturers of mobile devices for wireless Internet services should improve the overall functionality and performances of mobile devices without negatively affecting portability. However, at the same time, consumer preferences for specific attributes of wireless Internet services are found to affect the demand of each mobile device much differently. Therefore, the prediction that smart phones will be the prevalent mobile device for use of wireless Internet services can be somewhat changed, depending on which and how wireless Internet services are provided to each mobile device and how they affect the demand for each mobile device. As mentioned above, there are significant differences between mobile devices with regard to the effects of mobility, data transfer speed, type of contents or Internet interface for wireless Internet services. It is found that the mobility of wireless Internet service is highly valued for smaller devices, but not much for notebook PCs. In contrast, data transfer speed and similarities in the type of contents or Internet interface to those provided by fixed broadband Internet services become more important for larger mobile devices. Thus, it is necessary for wireless Internet service providers to differentiate and optimize their contents and Internet interfaces properly for various mobile devices. Additionally, it is reasonable that manufacturers of smart phones focus on mobility and portability (or convenience) rather than adding sophisticated functions or pursuing higher-level specifications. Further, for smart phones, for which mobility and convenience are important, wireless Internet service providers should develop and provide easy and convenient programs, rather than advanced programs that require high device performance. Lastly, with respect to individual demographics, young and highly educated people are more likely to be consumers of newly introduced mobile devices for using wireless Internet services. Therefore, these young and highly educated consumers should be considered a major target for manufacturers of mobile devices for wireless Internet services.

One of the most important factors in digital games is the immersion of the players to enhance their experience in the virtual world created by games. This immersion can be achieved in different ways, such as graphics effects, realistic physics, artificial intelligence and even from user inputs. The Nintendo Wii controller, Sony Playstation Move controller and Microsoft Xbox Kinect, to name a few, present new forms of user interaction using the player's movements, which has led to new forms of gameplay, as well as great forms of feedback. In addition, mobile devices are providing new features, like accelerometers, touch screens, cameras and GPS, which allow new forms of interaction in games played on these devices. In response to this evolution, this paper presents a multi-platform architecture that supports a desktop game being controlled by mobile devices, using their built-in features such as vibration feedback, sound feedback, image feedback and unique inputs like location, voice recognition, camera and gestures in order to enhance player immersion during game play. Additionally, the architecture supports different types of user data input, such as gesture and motion, that can be utilized according to user preferences and desires. Moreover, with this architecture, the mobile screen device can be used to give players feedback, like visual effects, scores and statistics. These available schemes have proven to be very useful and attractive for players, giving them choices that best fit their preferences and abilities. This architecture can also be used in collaborative games, where each player uses his device to interact with games running both on mobile devices and desktop computers. In order to demonstrate our architecture's effectiveness, we have developed a desktop game and done a case study with a pilot group of users, where some usability factors were evaluated. Finally, using a mobile device for game data input and player feedback provides people who are resistant to complex game controllers the opportunity to enjoy playing games using the same device they are accustomed to using daily, thereby minimizing the time needed to learn what is usually necessary to start enjoying a game. This can, in many situations, lower the barrier encountered by experienced smartphone users who are novice game players, as demonstrated in our pilot usability tests, which found high fun factors in such players.

This paper introduces iFringe, a mobile application that attempts to incorporate the resource heavy fringe analysis algorithms into the smart mobile devices platform. This first step taken towards mobility in the optical processing field aims to become a catalyst for modernization of various aspects of the field as well as to diversify developments to other applications. Predominantly, the motivation of this work stems from the vastly indifferent human interactive method of mobile devices, which enable images displayed on its touch screen to be manipulated in ways that could enhance the fringe analysis experience. Furthermore, given its hardware compatibility to the conventional fringe projection system, these mobile devices could potentially serve as a much more compact replacement. However, one imperative weakness that mobile devices pose is its limited computing ability. Therefore, to examine the feasibility of incorporating the fringe analysis algorithms into a mobile platform, we have implemented two fundamental fringe analysis techniques, namely the Fourier transform fringe analysis method and the phase-shifting technique. Formulas and processing procedures such as discrete Fourier transform (DFT) and quality-guided phase unwrapping, were included in accordance to their original algorithms to test their performance and usability on a smart mobile device. Details of the implementation and the performance results will also be presented in this paper to demonstrate the practicality of these algorithms on the smart mobile device platform.

The value of a mobile communication device is its ability to organize and access important information quickly. Mobile devices are often associated with the cutting‐edge technology of the last 4 years. Although having gained an increasing popularity over recent years, mobile devices have a history of 15 years. The first generation of mobile devices was the analog mobile phone. They were large and cumbersome, resembling a small briefcase. With the launch of the second generation, mobile phone units became smaller and easier to handle. Currently, third‐generation phones are starting to be released, advancing in design and dynamic capabilities. By the year 2005, 76% of consumers will own an Internet compatible device, 66% will own a cell phone, 45% will own an Internet cell phone, and 10% will own a personal digitial assistant (Forrester, ). In today's information surge, business never stops. IDC Research has forecasted that an average of more than 36 billion person‐to‐person e‐mails will be sent daily by 2005 (Juptner, ). Hence, mobile communication plays a major role in the success of most of today's business operations (Jones, ), and all businesses are continually faced with the challenge of engaging with the rapidly changing information technology age. One area of mobile communications that has been growing exponentially is mobile computing.

Due to advances in techniques for digital ecosystems and cyber engineering, users can now submit queries to search for inclusive information from different Web objects using mobile handheld devices such as smartphones in many real-life situations. As these mobile devices are not necessarily connected to the Internet all the time, users usually want to be able to get information such as e-mail, news, weather, and Web feed as soon as their mobile devices are connected to the Internet. However, these mobile devices have relatively limited resources. In this paper, we focus on mobile web navigation. Specifically, we use rooted directed trees, which enable users to access valuable information from the highly ranked and relevant Web sites, for answering user-inclusive queries.