Chiral Separations by Using Capillary Electrochromatography: An Overview.

Chiral drugs exert pharmacological effects through strict matching with chiral biological macromolecules and chiral recognition. Each enantiomer has different pharmacological activities, metabolic processes and rates, as well as toxicity pharmacokinetic characteristics owing to the difference in its interactions with the chiral environment. Therefore, method development for the resolution of chiral drugs is of great significance for the synthesis of chiral drugs and for quality control during the production process. Molecularly imprinted polymers (MIPs) are prepared by using a target molecule as the template. MIPs demonstrate highly specific recognition properties toward the target molecule since they have specific spatial molecular structures and functional groups. Hence, MIPs are particularly suitable for the separation and purification of chiral drugs. Capillary electrochromatography (CEC) offers the advantages of high separation efficiency and high selectivity owing to the dual separation mechanisms including capillary electrophoresis and liquid chromatography. By using MIPs as the stationary phases for CEC, the advantages of the two technologies can be combined to achieve efficient separation of chiral drugs. MIPs were first applied to CEC for chiral resolution in 1994, and since then, there have been notable advances in this field. The four main chiral separation modes in CEC involve the use of MIPs as the stationary phases of open tubular, packed, and monolithic columns, and as the pseudostationary phase in the separation medium. This review summarizes the research progress of these four methods and reveals the potential of MIPs in chiral resolution by CEC. The advantages and disadvantages of these methods are commented. MIPs as the stationary phases of packed columns can allow for chiral separation. However, the preparation of packed columns in narrow capillaries is difficult. In addition, frits must be prepared at the ends of the capillaries to seal the MIPs. The frits lead to the formation of bubbles during the CEC analysis, thus resulting in poor repeatability and stability. These problems can be overcome by using MIP-based open tubular columns. Furthermore, conditioning of open tubular columns is easy and less time-consuming. However, open tubular columns have limited capacity. MIP-based monolithic columns have greater capacity than do open tubular columns, and frits are not required in this case. However, in situ preparation of MIPs monolith in narrow capillaries is still challenging. The application of MIPs to chiral CEC can also be realized by using them as pseudostationary phases (additives) in the separation medium, and this allows for ease of operation. Moreover, the amount of MIPs introduced into the capillary can be accurately controlled. Thus, the batch-to-batch reproducibility can be improved, but this has the disadvantage of increased MIP consumption. In order to further expand the potential of MIPs in chiral CEC, the following aspects must be considered. First, improvement of the preparation method. In most reported MIP-based-chiral CEC techniques, the peaks of the imprinted molecules show severe tailing, and this problem must be resolved. Improving the mass transfer rate of the prepared MIPs may be a suitable solution in this regard. Second, development of new functional monomers. A functional monomer is an indispensable component in the preparation of MIPs. New functional monomers can be prepared according to the "three-point interaction" rule. Third, selection of template molecules. A single enantiomer of chiral drugs is used as the template molecule to prepare chiral MIPs. The method is not suitable for the preparation of MIPs of chiral drugs for which a single enantiomer is difficult to obtain. Therefore, appropriate choice of the template molecules for these drugs is imperative. Fourth, discussion of chiral separation mechanism. The mechanism of interaction between the template molecules and MIPs needs to be explored further, in order to obtain theoretical guidance for the design and preparation of chiral MIPs.

Chapter 28 - Capillary electrochromatography

The potential of the widely used chiral stationary phase for high-performance liquid chromatography (HPLC) enantioseparations, cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC, sold under the trade name Chiralcel OD) was evaluated under the conditions of nonaqueous capillary electrochromatography (CEC). The effect of the particle size of the silica gel, the loading of CDMPC on the silica gel and nature of the organic solvent, as well as electrolyte salts on the separation characteristics were investigated. This study illustrates the applicability of CDMPC for obtaining highly efficient enantioseparations under the conditions of nonaqueous CEC. Comparative study of enantioseparations in capillary liquid chromatography (CLC) and CEC indicated the significant advantages of CEC such as higher plate number at the similar linear flow rates of the mobile phase as well as better tolerance of higher linear flow rates.

Chiral separations in food analysis

Capillary electrochromatography (CEC) has been realised as a combination of high performance liquid chromatography (HPLC) and capillary electrophoresis (CE) allowing the separation of analytes based on their differing adsorption and migration behaviour. There is a considerable interest in developing new methodologies for CEC, which uses chromatographic beads or monoliths as stationary phases or alternatively employs open tubular (OT) capillaries relying on surface modifications. Besides the bulk flat flow profile of the mobile phase in CEC columns allowing an enhanced resolution, due to the influence of the applied electrical field there are other possibilities to provide a higher resolution with better detection. As an additional newly means for peak sharpening and sample enrichment isotachophoresis and a “sweeping mechanism” could be envisaged, which both take advantage of the inhomogeneous electric field pattern in the capillary by choosing appropriate leading and terminating background electrolytes (BGEs). Transient isotachophoresis would be another technique to provide an increased plate height in the separations, using an optimized sample matrix, e.g. containing a relatively high acetonitrile content, with the same leading and terminating BGEs. In this thesis, a new method to generate a “sharpening zone”, which is similar to the concept of transient isotachophoresis, was established using an aqueous sample matrix containing an organic solvent. Target analytes within this zone could be concentrated whilst they migrated through the capillary. A novel technique was developed that used the sharpening zone for sweeping and concentrating several unresolved analyte peaks allowing an enhanced peak resolution. As the aim was to concentrate only some part of the analyte zone containing compounds of interest, the position and width of the sharpening zone needed to be well controlled. Various techniques to tune the width and position of the sharpening zone were thus developed, involving modifying the organic modifier content in the BGE, applying pressure additionally to the electroosmotic flow (EOF) and modifying the inner surface of the capillaries. This work also critically evaluated some related existing knowledge and theoretical approaches in CEC including the concept of tuneable system eigenpeaks (noncomigrating or ghost peaks caused by waves of an electric field in the capillary). Although peak broadening caused by eigenpeaks (which often suppresses resolution in CEC) has been well described for aqueous or pure non-aqueous BGEs, a systematic study of eigenmobility in aqueous/acetonitrile BGEs had not been reported. The experiments related to the eigenmobility led to a new approach to tune the eigenpeak position in chromatograms whereby a selective sample peak sharpening mechanism was elaborated using the sharpening zone. The novel approach was demonstrated for the separation of various peptides in the CE mode and for the resolution of incompletely resolved chiral amino acids in CEC. These investigations furthermore led to the development of an appropriate stationary phase, which was produced using techniques for an in-column synthesis of a molecular imprinted polymer (MIP). Well prepared MIPs are capable of specifically enhancing the retention of target analytes, herein focusing on enantio-selective isolation of chiral molecules. Since such a MIP was rather rigid, which often caused capillary clogging when used as a conventional monolithic stationary phase, this MIP was incorporated into porous layer open tubular (PLOT) capillaries. Numerous experimental difficulties were overcome with respect to the vinylisation of long fused-silica capillaries and for the polymerisation of the MIP within using thermal- and photo-polymerisations. A method for the characterization of such MIP-PLOT capillaries was elaborated involving the Langmuir adsorption theory. The new columns were evaluated using chromatography, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and CEC analysis. All experiments were designed according to the principles of Green Chemistry. These concepts involved the use of small scale analysis, simulation studies reducing the number of performed experiments, systematic studies with low amounts of solvents and materials, and optimisation of synthesis methods to reduce time, energy and reagent consumption. The theories, methods and results presented in this thesis will, in the future, allow further targeted developments of novel analytical tools for a green, sensitive, selective and improved resolution analysis of chemical and biological compounds including chiral compounds, peptides and proteins.

This review summarizes recent developments in chiral separation in capillary zone electrophoresis (CZE), electrokinetic chromatography (EKC), and capillary electrochromatography (CEC) covering literature published since the year 2000. New chiral selectors and innovative approaches for CE and CEC are introduced. Recent progress in column technology for CEC is highlighted and the development of new chiral stationary phases is discussed. This review is not dedicated to list applications but will focus on new developments.

Chapter 9 - Capillary Electrochromatography

Recent applications and chiral separation development based on stationary phases in open tubular capillary electrochromatography (2019–2022)

A positively charged chiral stationary phase (CSP) was prepared by chemically immobilizing cellulose 3,5-dimethylphenylcarbamate onto methacryloyldiethylenetriaminopropylated silica (MCDEAPS) via a radical copolymerization reaction. The prepared CSP was evaluated for enantiomer separation in nonaqueous capillary electrochromatography (CEC). Electroosmotic flow (EOF) generated on the prepared CSP could be significantly improved with introduction of positive charges into the CSP, and separation of enantiomers in CEC has been achieved with mobile phases of ethanol and hexane-ethanol, respectively. In addition, we investigated the solvent versatility of the immobilized CSP on enantioseparations in CEC and capillary liquid chromatography (CLC) due to the elimination of dissolution of chiral selector in a number of solvents. Chiral resolution of some enantiomers was improved by adopting tetrahydrofuran (THF) and chloroform as mobile-phase modifiers, respectively.

Enantioseparation of α-amino acids on an 18-crown-6-tetracarboxylic acid-bonded silica by capillary electrochromatography

Deactivation of frits for use in capillary high-performance liquid chromatography and capillary electrochromatography with characterization by imaging with laser-induced fluorescence

Use of nanoparticles in capillary and microchip electrochromatography

L-Cys-functionalized Zr-based MOF NU-1000: Fabrication and application as chiral stationary phase in open tubular capillary electrochromatography for chiral separation.

The separation of chiral compounds is an interesting and important topic of research because these compounds are involved in some biological processes, fundamentally in human health. Among the various application fields where enantiomers are remarkable, drug analysis has to be considered. Most of the drugs contain enantiomers and very often one of the two isomers could be pharmacologically more active or even dangerous. Therefore, the separation of these compounds is very important. Among the different analytical techniques usually employed, capillary electrochromatography has demonstrated great capability in enantiomers resolution. The great potential of this electromigration technique stands mainly in its high efficiency due to the use of an electrosmotic flow (flat flow profile) and on the high selectivity because of the use of a stationary phase. Chiral separation can be obtained utilizing several chiral stationary phases including a polysaccharide derivative. The aim of this review paper is to summarize the main features of capillary electrochromatography and polysaccharide derivatives of chiral stationary phase. It also report examples of practical applications utilizing this approach.

Thein situdetection of organic molecules in space is key to understanding the variety and the distribution of the building blocks of life, and possibly the detection of extraterrestrial life itself. Gas chromatography mass spectrometry (GC-MS) has been the most sensitive analytical strategy for organic analyses in flight, and was used on missions from NASA's Viking, Phoenix, Curiosity missions to ESA's Rosetta space probe. While pyrolysis GC-MS revealed the first organics on Mars, this step alters or degrades certain fragile molecules that are excellent biosignatures including polypeptides, oligonucleotides and polysaccharides, rendering the intact precursors undetectable. We have identified a solution tailored to the detection of biopolymers and other biomarkers by the use of liquid-based capillary electrophoresis and electrochromatography. In this study, we show that a capillary electrochromatography approach using monolithic stationary phases with tailor-made surface chemistry can separate and identify various polycyclic aromatic hydrocarbons, nucleobases and aromatic acids that could be formed under astrophysically relevant conditions. In order to simulate flyby organic sample capture, we conducted hypervelocity impact experiments which consisted of accelerating peptide-soaked montmorillonite particles to a speed of 5.6 km s−1, and capturing them in an amorphous silica aerogel of 10 mg cm−3bulk density. Bulk peptide extraction from aerogel followed by capillary zone electrophoresis led to the detection of only two stereoisomeric peptide peaks. The recovery rates of each step of the extraction procedure after the hypervelocity impact suggest that major peptide loss occurred during the impact. Our study provides initial exploration of feasibility of this approach for capturing intact peptides, and subsequently detecting candidate biomolecules during flight missions that would be missed by GC-MS alone. As the monolith-based electrochromatography technology could be customized to detect specific classes of compounds as well as miniaturized, these results demonstrate the potential of the instrumentation for future astrobiology-related spaceflight missions.