- Research Article
3
- 10.2174/2352096509666151109205645
High Efficiency 2.4 GHz CMOS Two Stages Class-F Power Amplifier for Wireless Transmitters
- Apr 18, 2016
- Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering)
- Sohiful A.Z Murad + 3 more +3
A design of CMOS class-F power amplifier (PA) at 2.4-GHz for wireless transmitters is presented. The class-F PA design is implemented by using 0.13-μm CMOS process. The proposed class-F PA employs cascade topology. The transistor’s on resistance is decreased by designing the transistors in parallel. Therefore, the efficiency is increased. The first stage is a common-source driver stage is biased in a class-AB to provide sufficient input voltage swing for the amplifier stage, while the amplifier stage is biased in cut-off region. Therefore, the transistor can operate as a switching-mode for high efficiency. The simulation results show that the power added efficiency (PAE) of 60% is obtained at 1.3 V power supply and the PA delivers 12 dBm output power. The chip area is 0.66 mm². Keywords: Cascade, class F, power added efficiency, power amplifier, wireless, output power.
Read more