Decentralized Model Predictive Control

This paper concerns a distributed model predictive control (DMPC) strategy in which each controller views the signals from other subsystems as disturbance inputs in its local model. The DMPC controllers exchange predictions on the bounds of their state trajectories and incorporate this information into their local DMPC problems. They also impose their own predicted state bounds as constraints in subsequent DMPC iterations to guarantee their subsystem satisfies the bounds broadcast to the other controllers. Each controller solves a local min-max problem on each iteration to optimize performance with respect to worst-case disturbances. Parameterized state feedback is introduced into the DMPC formulation to obtain less conservative solutions and predictions. The paper presents sufficient conditions for feasibility and stability. The approach is illustrated with an example.

In this work, a Distributed Model Predictive Control (MPC) methodology with fuzzy negotiation among subsystems has been developed and applied to a simulated sewer network. The wastewater treatment plant (WWTP) receiving this wastewater has also been considered in the methodology by means of an additional objective for the problem. In order to decompose the system into interconnected local subsystems, sectorization techniques have been applied based on structural analysis. In addition, a dynamic setpoint generation method has been added to improve system performance. The results obtained with the proposed methodology are compared to those obtained with standard centralized and decentralized model predictive controllers.

Designing a stabilized distributed model predictive control (DMPC) with constraints is an open and important problem for a class of large-scale distributed systems, which are composed by both weakly and strongly coupled subsystems. This paper proposes a design of DMPC network to stabilize this class of large-scale systems. A coupling degree-based clustering method is first designed to classify subsystems into some middle-scale subsystems (M-subsystem) off-line according to the adjacent matrix, so that these M-subsystems are weakly coupled with each other. Then, each M-subsystem is controlled by a virtual model predictive control (MPC), which is realized by several individual controllers with running iterative cooperative DMPC algorithm, since the solution of cooperative DMPC is able to converge to a fixed point without coupling constraints. Each MPC communicates with the corresponding interacted M-subsystems’ MPCs once in a control period for exchanging future state evolution estimation. All the subsystem-based MPCs are composed of the proposed peer-to-peer DMPC network. In addition, an additional consistency and stabilization constraints are added to guarantee the recursive feasibility and stability of the overall system. The convergence of the iterative DMPC algorithm for each M-subsystem and the stabilization analysis of the overall system are provided. The simulation results show the efficiency of the proposed method. Note to Practitioners —The proposed method is designed for the systems, which are composed of both strong and weak coupling subsystems and are controlled in a distributed structure. The aim of this method is to design a distributed model predictive control (MPC) network for the operational optimization of entire system. The designed control structure and the distributed MPC algorithm with the proposed method could guarantee the recursive feasibility and asymptotic stability of the entire system. To apply this method, the first step is to obtain the models of each subsystem. Then, design the distributed MPC network structure according to the proposed cluster algorithm, which determines the set of subsystems that each virtue MPC controls. Next step is to configure the network information exchanging among these subsystems and construct the optimization problem of each subsystem. Finally, use the existing quadratically constrained quadratic program solvers to calculate the optimal control laws and apply these optimal control laws to the corresponding subsystems. This method can be used in large-scale chemical processes, air conditioner systems for multizone buildings, distributed energy generation systems, and so on.

Fil: Giovanini, Leonardo Luis. Consejo Nacional de Investigaciones Cientificas y Tecnicas. Centro Cientifico Tecnologico Conicet - Santa Fe. Instituto de Investigacion en Senales, Sistemas e Inteligencia Computacional. Universidad Nacional del Litoral. Facultad de Ingenieria y Ciencias Hidricas. Instituto de Investigacion en Senales, Sistemas e Inteligencia Computacional; Argentina

This work focuses on a class of nonlinear control problems that arise when new control systems which may use networked sensors and/or actuators are added to already operating control loops to improve closed‐loop performance. In this case, it is desirable to design the pre‐existing control system and the new control system in a way such that they coordinate their actions. To address this control problem, a distributed model predictive control method is introduced where both the pre‐existing control system and the new control system are designed via Lyapunov‐based model predictive control. Working with general nonlinear models of chemical processes and assuming that there exists a Lyapunov‐based controller that stabilizes the nominal closed‐loop system using only the pre‐existing control loops, two separate Lyapunov‐based model predictive controllers are designed that coordinate their actions in an efficient fashion. Specifically, the proposed distributed model predictive control design preserves the stability properties of the Lyapunov‐based controller, improves the closed‐loop performance, and allows handling input constraints. In addition, the proposed distributed control design requires reduced communication between the two distributed controllers since it requires that these controllers communicate only once at each sampling time and is computationally more efficient compared to the corresponding centralized model predictive control design. The theoretical results are illustrated using a chemical process example. © 2009 American Institute of Chemical Engineers AIChE J, 2009

Partitioned Based Cooperative Distributed Model Predictive Control for Large-Scale Nonlinear Systems

Decentralized machine-learning-based predictive control of nonlinear processes

Combined environmental and economic dispatch of smart grids using distributed model predictive control

In this paper, we study the distributed model predictive control (MPC) of polytopic uncertain systems with quantised communication and packet dropouts. The model of the whole plant is divided into a certain number of incomplete subsystems. Due to the nature of the distributed control structure, there is generally a lack of information about the state of the overall system. Each subsystem shares its information with neighbour subsystems via reliable connection. Distributed MPC controllers are designed for each subsystem by solving the linear matrix inequalities optimisation problem. The distributed state feedback laws are quantised and transmitted via communication network. An iterative algorithm is presented to make coordination among distributed state feedback laws. The communication is assumed to be affected by random packet dropouts in a representation of Bernoulli distributed white sequences with known conditional probabilities. A case study is carried out to demonstrate the effectiveness of the proposed distributed MPC technique.

This paper is concerned with the distributed model predictive control (MPC) problem for a class of discrete-time Markovian jump linear systems (MJLSs) subject to actuator saturation and polytopic uncertainty in system matrices. The global system is decomposed into several subsystems which coordinate with each other. A set of distributed controllers is designed by solving a min-max optimization problem in terms of the solutions of linear matrix inequalities (LMIs). An iterative algorithm is developed to achieve the online computation. Finally, a simulation example is employed to show the effectiveness of the proposed algorithm.

This is a position paper on the current state of the art in distributed Model Predictive Control (MPC) and our view on its future potential. We present results from a recent survey of 35 distributed MPC approaches. For this, we propose a way in which distributed MPC approaches can be categorized for comparison. We also link the potential that these approaches have to the domain of other fields such as integrated environmental optimal decision making and cyber-physical systems. Many challenges for realizing these links have to be faced. We present our views on how the advances in several highly active research domains could be used to overcome these challenges. As such, this paper is intended as a starting point for the exploration of various novel research cooperations.

This paper presents a decentralized Model Predictive Control (MPC) for Automatic Generation Control (AGC) of a realistic multi power system in Egypt with inherent nonlinearities. The Egyptian Power System (EPS) is decomposed into three dynamic subsystems which are non-reheat, reheat, and hydro power plants. Moreover, each subsystem has its private characteristics compared to the others. Therefore, each subsystem controller has been designed independently to guarantee the stability of the overall closed loop system. Hence, MPC is proposed for every subsystem separately to regulate the frequency and to track the load demands of EPS. The performance of the proposed decentralized MPC of each subsystem is compared with the centralized one at different operational scenarios. The results by nonlinear simulation MATLAB/SIMULINK for the generation control of EPS approves that the decentralized predictive model gives almost the same performance as the centralized one. However, the centralized model cannot address the large load disturbance and system parameters variation. In contrast, the decentralized MPC scheme is more robust and effective against all disturbances and operating conditions.

In this study, an approach to design robust distributed model predictive control (MPC) is proposed for polytopic uncertain networked control systems with time delays. To reduce the computational complexity and improve the flexibility, the entire system is decomposed into multiple smaller dimensional subsystems. For each subsystem, the proposed robust distributed MPC algorithm requires solving multiple linear matrix inequality optimisation problems to minimise an upper bound on a robust performance objective. An augmented polytopic uncertainty description is invoked to handle the input delays. The conservativeness of distributed MPC algorithm is reduced by utilising a sequence of feedback control laws. An iterative on‐line algorithm for robust distributed MPC is developed to coordinate the distributed MPC controllers. Convergence and robust stability of the proposed distributed MPC are investigated. A numerical example is carried out to demonstrate the effectiveness of the proposed algorithm.

Decentralized Model Predictive Control for Polymer Electrolyte Membrane Fuel Cell System

This work presents a learning-based approximation scheme to improve the computational burden of general distributed model predictive control (DMPC). Under the framework of dual decomposition, an independent neural network approximator with rectified linear unit is designed for each subsystem. The primal and Lagrangian dual analysis indicates that this error-containing approximation is a suboptimal solution of the global DMPC optimization problem. In addition, the distributed conditions designed to guarantee the feasibility and stability of global system, which inspired by an explicit-implicit procedure to approximate an MPC law, are derived from an decoupling process using dual decomposition. In cases with infeasible approximator output or the distributed conditions are violated, an backup controller will used to promote the implementation of approximation. The proposed learning-based DMPC approximator with feasibility and stability guarantees is finally employed to a reactor-separator process, and simulation results demonstrate the efficiency and superior performance of proposed strategy.