Demo

Time synchronization provides the basis for several applications in wireless sensor networks but the limited memory and computational power, and the use of low precision oscillators make the task of time synchronization non-trivial. In this demonstration, we present a novel time synchronization scheme that is based on time series analysis. To provide a general model for the practical behavior of low precision oscillators, autoregressive integrated moving average models are explored. Based on the analysis of experimental data, an autoregressive integrated model (ARI (1,1)) is derived. Unlike the resource hungry Kalman filter based formulations, the proposed scheme is resource efficient as it results in simple linear regression processing. Experiments are performed on real sensor devices including Zolertia and TelosB, where an accuracy below 1 clock tick1 is achieved.

Resource Management Approach to an Efficient Wireless Sensor Network

ABSTRACTReliability is a crucial aspect of time synchronization for industrial wireless applications in wireless sensor networks. Existing time synchronization algorithms often provide good synchronization in laboratory environments; however, outdoor environments with associated radio interference influence the performance of time synchronization. In this paper, we propose a random time source protocol for industrial wireless applications in wireless sensor network synchronization. Each synchronized node randomly selects its time source for each period in order to prevent reliance on a fixed time source because this may lead to resynchronization once the source fails. We have implemented the algorithm on the SIA2420 platform usingTinyOS, and the results show the reliability of our protocol. Copyright © 2011 John Wiley & Sons, Ltd.

Developing Wireless Sensor Networks (WSN) applications is not an easy task, since it demands different expertise and knowledge. To address this problem, we propose a model-driven approach to build WSN applications. It promotes the separation of concerns between two levels of requirements involved: (i) domain experts, with no knowledge on WSN platforms, contribute to the development of applications, (ii) network experts, with no knowledge on the application domain, program nodes to meet application requirements. Our approach also promotes the reuse of software artifacts: an application model can be reused on different sensor platforms and a platform model can be reused for different WSN applications.

The area of Ambient Intelligence recently seems to be matured enough and widely accepted as one of the basic supporting technologies and approaches for human living environment enhancement. There are many interesting applications of wireless sensor networks coupled with ambient intelligence applications, mainly for the creation of indoor intelligent spaces. However, there are just a few of them aiming at the enhancement of outdoor environments in order to support human activities typical for wide-area spaces in open natural environments. There are also a number of useful applications of wireless sensor networks aiming at environmental monitoring, however, just a few of them, if any, are taking advantage of recent achievements of Ambient Intelligence. In our paper, we intend to go further with the ideas of how the Ambient Intelligence used in a wide manner in connection with wireless sensor networks throughout the open natural environment could be beneficial not only for early warning in case of possible disasters, but also as an important supporting tool for people located in outdoor areas due to various reasons, e.g. hitchhikers, hikers on difficult mountains tracks, or even workers in exacting outdoor workplaces (i.e., a coal mine). An idea of a large-scale Ambient Intelligence system based on a wide area wireless sensor network is presented, where the system should be able to monitor the environment, evaluate the collected data and, if necessary, inform the workers in the environment about possible threats and also give some hints for their rescue, using various communication devices.

Error control coding improves reliability and efficiency of wireless communication systems. This research delves into the latest advancements in error control coding schemes for wireless communication systems, with a specific focus on their application within the domain of Low Power Wide Area Networks (LPWANs) such as Narrowband Internet of Things (NB-IoT) systems, LoRa energy-efficient hardware design, random access control systems, and wireless sensor networks. In the context of LPWANs, particularly NB-IoT systems, we investigate the adaptive coding and modulation (ACM) in NB-IoT systems, which adapts coding rates and modulation techniques to changing channel circumstances. Comprehensive analysis of the literature review shows that the proposed approaches are more energy efficient and less error-prone than fixed coding and modulation schemes. Using Cell Design Methodology (CDM), Single Error Correction (SEC) codes are optimized for energy efficiency. Power and energy efficiency have improved in standard CMOS and CDM logic systems. This impacts IoT devices, memory storage, and security systems. Next, Forward Error Correction (FEC) is examined for ALOHA-based random-access control systems wherein packet loss rate and spectral efficiency metrics are mathematically calculated. FEC is beneficial, especially when time and frequency synchronization diverge. Monte Carlo simulations studied in the literature shows that FEC improves satellite communication systems. This review establishes benefits of FEC, notably in satellite communications systems. In addition, Wireless Sensor Networks (WSNs) error control techniques and network reliability and performance are examined along with Convolutional, Turbo, Low density parity check codes(LDPC), and Polar error correction coding (ECC) methods. We learn about their benefits, drawbacks, and implementation challenges by assessing their efficacy, efficiency, and applicability in wireless sensor networks (WSN) applications. This study further highlights advancements of energy-efficient error control coding when, integrated into network designs alongwith the trade-offs between efficacy and intricacy to help improve wireless communication networks. Finally, this study summarizes current error control coding approaches for wireless communication systems. We provide insights into improving reliability, energy conservation, and efficacy by examining ACM, CDM, FEC, and error correction coding (ECC) across varied domains including LPWAN and IoT technologies with earnest hope to facilitate researchers, engineers, and professionals working in the field of error control coding in wireless communication.

The rapid advancement of programmable logic devices (PLDs) and field-programmable gate arrays (FPGAs) has enabled the development of adaptive VLSI architectures optimized for next-generation wireless communication systems. This research focuses on RFID and Wireless Sensor Network (WSN) applications, integrating AI-driven optimization techniques to enhance power efficiency, processing speed, and system adaptability. A hybrid AI-based hardware optimization technique, combining Reinforcement Learning (RL) and Genetic Algorithm (GA), is introduced to improve resource utilization and reduce latency. Additionally, an AI-Optimized Dynamic Frequency Scaling (DFS) technique is implemented to adjust FPGA operating frequencies in real-time, achieving a power reduction of 27.6% while maintaining high computational efficiency. Processor implementation for RFID-based power-saving appliances, reducing power consumption by 32.5% compared to conventional approaches. Hardware realization of an optimized anti-collision algorithm for RFID, achieving a 24.8% increase in tag identification speed. FPGA-based security architecture integrating lightweight cryptographic techniques, enhancing data security with a 96.2% encryption success rate and 25% lower hard-ware resource usage. Power-efficient WSN node implementation using an adaptive localization algorithm, reducing localization errors by 18.4% and extending node lifespan by 29.3%. Low-power CORDIC algorithm-based DPSK modem implementation with 32.1% lower latency in real-time signal processing applications. AI-Optimized DFS technique, reducing dynamic power consumption by 27.6% and improving computational throughput by 22.7%, making FPGA implementations more energy-efficient. The designs were developed using VHDL-based high-level hardware description, simulated in Xilinx ISE 14.3, and implemented on Virtex-5, Spartan-6, and Kintex-7 FPGA platforms. Performance evaluations and comparative studies with existing models confirm significant improvements in power efficiency, processing speed, and adaptability. The findings contribute to the development of high-performance, power-efficient, and scalable VLSI architectures for RFID and WSN applications, paving the way for next-generation secure and intelligent wireless communication systems.

The study introduced foreign and domestic situation of wireless sensor network technology in precision agriculture in detail. Applications of wireless sensor network are universal in foreign precision agriculture, however in its beginning stage in domestic agriculture. The function of domestic system based on wireless sensor network is usually positioning measurement and processing of agriculture elements, which does not meet final requirement of precision agriculture. The study designed a universal wireless sensor network for M2M combined intelligent communication technology and big agriculture machinery. The key technologies of wireless sensor network for M2M include development plan of ISA SP100.11a, spectrum technology based on DSSS, network technology based on net routing and low power radio frequency design, which can meet the real-time character, reliability, robustness and low energy consumption requirement of wireless communication in precision fruits. Moreover, the study presented several typical applications in precision fruits (including farming machine, water-saving irrigation machine and picking machine). With development of precision fruits in breadth and depth, integration application of wireless sensor network would have a widen prospect in the future.

In wireless sensor networks, efficient usage of energy helps in improving the network lifetime. Many power saving MAC schemes based on TDMA have been proposed in recent years, but none of them particularly discuss the problem of time synchronization. As there are many time synchronization algorithms have been proposed, but they can't be applied to these TDMA MAC schemes directly. In this paper, a lightweight and energy efficient time synchronization (LEETS) scheme that can be applied to all kinds of TDMA power saving MAC schemes was proposed. In the scheme, nodes compete the first slot of each time frame to broadcast local time information, which can be used to realize whole network synchronization. And guard interval is inserted in two consecutive slots to avoid collision may be caused by synchronization errors. The scheme has been simulated and the results show LEETS needs less message exchanges to realize synchronization than other time synchronization schemes. So, It is lightweight and energy efficient.

In order to reduce or avoid the coal mine accidents, this paper proposes the application of wireless sensor networks (WSN) in the coal mine safety intelligent monitoring system, and discusses the principle and advantages of wireless sensor networks. According to the current situation of low level of intellectualization in coal mine safety monitoring system and the existing problems, this paper proposes the designing proposal and the monitoring mechanism of the coal mine safety intelligent monitoring system, discusses the feasibility, the method and the way of the application of the wireless sensor networks in the coal mine safety intelligent monitoring system.

Wireless sensor networks consist of a large number of low-cost, low-power, and multifunctional sensor nodes that communicate over short distances through wireless links. Such sensor networks are ideal candidates for a wide range of applications such as monitoring of critical infrastructures, data acquisition in hazardous environments, industry control systems, vehicular networks, and military operations. Wireless sensor networks introduce new security challenges due to their dynamic topology, severe resource constraints, and absence of a trusted infrastructure. The purpose of this special issue is to publish high-quality research papers as well as review articles addressing recent advances of wireless sensor network security. In this special issue, we will explore the topic of security challenges and solutions for the wide application of wireless sensor networks in different areas, such as RFID and smart grid. RFID has been widely used in logistics and internet of things. Smart grid leverages sensor networks to better balance the load of the power grid. Both of them have great impact on the daily life and areweak points of thewhole economy,which attract the attention of terrorists. The feasible attacks and defense solutions are still not clear.The papers in this volume also cover several important foundational security services for wireless sensor networks, such as key management, key distribution, secure cluster formation, secure architecture for multihop communication, intrusion prediction, and secure localization. All these foundational security services are critical bases for application of wireless sensor networks. We hope that the papers in this volume engender further thinking about new security challenges for wireless sensor networks and even further “out-of-the-box” ideas about how to solve new security problems for wireless sensor networks.

We present a case study that considers the application of runtime verification technology to a wireless sensor application. The case study is performed using the SURGE TinyOS application for multi-hop routing, which executes on the Avrora TinyOS simulator. We discuss the problems we have encountered in the course of case study. The problems include unclear correctness properties for wireless network applications (indicating ad hoc development process) and inadequate tool support. A wireless sensor network usually comprises of a collection of tiny devices with built-in processors that can gather physical and environment information such as temperature, light, sound, etc., and communicate with one another over radio. Many wireless sensor network applications sit on top of an operating system called TinyOS and are mostly written in nesC, an extension of C that provides a component-based programming paradigm. Most of wireless sensor network applications are developed and tested on a simulator before they are deployed in the environment because testing and debugging directly on physical devices are very difficult, especially when the network consists of many nodes, and may not provide enough information for debugging. A simulator usually produces detailed execution information and can help find errors. However, even with the simulator and nesC, the current state of development tools for wireless sensor network still requires very low-level programming, which makes it hard for the developers to maintain a high-level view of the system operation. During the validation stage, lack of sophisticated debugging tools for sensor networks makes it difficult to make the connection between a high-level functional or performance requirement and a particular aspect of system implementation. This paper investigates a high-level approach to examine execution data from a simulator and analyze it using runtime verification. The technique 1) identifies and formally specifies high-level requirements for the system under development, 2) monitors a distributed wireless sensor network application using data provided by the simulator, and 3) checks for timing and dynamic properties to gain understanding of the relevant behaviors of wireless sensor nodes and to provide a systematic approach in finding bugs and errors. A particular runtime verification used inthis paper is MaC. MaC provides specification languages capable of expressing functional, timing, and probabilistic properties to specify requirements or patterns of errors. Properties can, for example, examine periodic behaviors or identify a faulty node. MaC then monitors and checks a wireless sensor network application against its specification by observing data produced by a simulator. The motivation for applying the monitoring and checking technique to check wireless sensor network applications is threefold: 1) raise the development level for wireless sensor network, 2) provide a mechanism for understanding high-level behaviors of the system in terms of low-level observation, and 3) provide a tool based on the acceptance of the state of the art development tool for sensor networks.

Wireless industrial sensor networks are wireless sensor networks which have been adapted to industrial applications. Most techniques for wireless sensor networks can be applied to wireless industrial sensor networks. However, for industrial applications of wireless industrial sensor networks, new requirements such as real-time, reliable delivery need to be considered. In this paper, we propose EARQ, which is a novel routing protocol for wireless industrial sensor networks. It provides real-time, reliable delivery of a packet, while considering energy awareness. In EARQ, a node estimates the energy cost, delay and reliability of a path to the sink node, based only on information from neighboring nodes. Then, it calculates the probability of selecting a path, using the estimates. When packet forwarding is required, it randomly selects the next node. A path with lower energy cost is likely to be selected, because the probability is inversely proportional to the energy cost to the sink node. To achieve real-time delivery, only paths that may deliver a packet in time are selected. To achieve reliability, it may send a redundant packet via an alternate path, but only if it is a source of a packet. Experimental results show that EARQ is suitable for industrial applications, due to its capability for energy efficient, real-time, reliable communications.

Wireless sensor networks (WSN) have specific constraints and stringent requirements in contrast to traditional wired and wireless computer networks. Among these specific requirements, energy-efficiency is the most prominent. Sensor motes have finite amount of energy supply. In most WSN applications, hundreds or thousands of motes are deployed in an area (e.g., behind enemy lines or foliage) and there is no provision for battery recharging. Therefore, a fundamental constraint on WSN applications and services is to extend the network's lifetime by making the batteries run longer. In this paper we propose an energy-efficient time synchronization protocol, referred as ETSP, which gives significant improvement in energy consumption over existing time synchronization schemes. We first evaluate the existing reference broadcast synchronization (RBS) and time-sync protocol for sensor networks (TPSN), which are two prominent examples of receiver-receiver and sender-receiver synchronization methods. This performance analysis demonstrates that combination of RBS and TPSN can work better than using these techniques separately. In the proposed ETSP protocol, we identify conditions to toggle between RBS and TPSN based on a threshold value. We experimentally and mathematically derive an optimal value of the switching threshold for different sensor motes. In this way we effectively reduce the number of transmissions which results in saving energy. Moreover, we assess the performance of our protocol on the bit error traces collected over a real WSN test bed to cater for retransmissions overload for the time synchronization protocols under consideration.

The wireless sensor network is an emerging technology, which is used to sense and monitor the environment. As the nodes are deployed in an open environment, the security is one of the essential factors. The cryptography techniques can ensure confidentiality, integrity and authentication. However, wireless sensor network also needs to deal with inside and outside attackers. To deal with outside attackers, attacks by compromised or malicious nodes, trust management system is suggested by many researchers in the area of wireless sensor network. Trust management system can be implemented in various applications for security management such as secure data aggregation, secure cluster head selection, trusted routing, access control, etc. Many researchers provide different kind of solutions for these secure applications based on trust management. However, to incorporate, all such applications on a single sensor node in the network, it is essential to design and develop a trust management system, which considers various aspects and applications of wireless sensor network. As a result, in this paper, we would like to propose a parameter and trust factor based secure communication framework and design a trust management system for wireless sensor networks. Our main contribution is to identify various parameters and trust factors which influences on trust in wireless sensor network and developing a framework for a trust management system based on various parameters and trust factors. The working of the proposed model is shown by simulation experiments conducted in MATLAB for the application of secure communication, data aggregation and intrusion detection in wireless sensor networks.