Domain Adaptive Decision Trees: Implications for Accuracy and Fairness

This paper addresses the problem of land-cover map updating by classification of multitemporal remote-sensing images in the context of domain adaptation (DA). The basic assumptions behind the proposed approach are twofold. The first one is that training data (ground reference information) are available for one of the considered multitemporal acquisitions (source domain) whereas they are not for the other (target domain). The second one is that multitemporal acquisitions (i.e., target and source domains) may be characterized by different sets of classes. Unlike other approaches available in the literature, the proposed DA Bayesian classifier based on maximum a posteriori decision rule (DA-MAP) automatically identifies whether there exist differences between the set of classes in the target and source domains and properly handles these differences in the updating process. The proposed method was tested in different scenarios of increasing complexity related to multitemporal image classification. Experimental results on medium-resolution and very high resolution multitemporal remote-sensing data sets confirm the effectiveness and the reliability of the proposed DA-MAP classifier.

In the absence of the labeled samples in a domain referred to as target domain, Domain Adaptation (DA) techniques come in handy. Generally, DA techniques assume there are available source domains that share similar predictive function with the target domain. Two core challenges of DA typically arise, variance that exists between source and target domains, and the inherent source hypothesis bias. In this paper, we first propose a Stability Transfer criterion for selecting relevant source domains with low variance. With this criterion, we introduce a TARget learning Assisted by Source Classifier Adaptation (TARASCA) method to address the two core challenges that have impeded the performances of DA techniques. To verify the robustness of TARASCA, extensive experimental studies are carried out with comparison to several state-of-the-art DA methods on the real-world Sentiment and Newsgroups datasets, where various settings for the class ratios of the source and target domains are considered.

Multisource unsupervised domain adaptation (MUDA) is an important and challenging topic for target classification with the assistance of labeled data in source domains. When we have several labeled source domains, it is difficult to map all source domains and target domain into a common feature space for classifying the targets well. In this article, a new progressive multisource domain adaptation network (PMSDAN) is proposed to further improve the classification performance. PMSDAN mainly consists of two steps for distribution alignment. First, the multiple source domains are integrated as one auxiliary domain to match the distribution with the target domain. By doing this, we can generally reduce the distribution discrepancy between each source and target domains, as well as the discrepancy between different source domains. It can efficiently explore useful knowledge from the integrated source domain. Second, to mine assistance knowledge from each source domain as much as possible, the distribution of the target domain is separately aligned with that of each source domain. A weighted fusion method is employed to combine the multiple classification results for making the final decision. In the optimization of domain adaption, weighted hybrid maximum mean discrepancy (WHMMD) is proposed, and it considers both the interclass and intraclass discrepancies. The effectiveness of the proposed PMSDAN is demonstrated in the experiments comparing with some state-of-the-art methods.

Recent progress in machine learning has been mainly due to the availability of large amounts of annotated data used for training complex models with deep architectures. Annotating this training data becomes burdensome and creates a major bottleneck in maintaining machine-learning databases. Moreover, these trained models fail to generalize to new categories or new varieties of the same categories. This is because new categories or new varieties have data distribution different from the training data distribution. To tackle these problems, this thesis proposes to develop a family of transfer-learning techniques that can deal with different training (source) and testing (target) distributions with the assumption that the availability of annotated data is limited in the testing domain. This is done by using the auxiliary data-abundant source domain from which useful knowledge is transferred that can be applied to data-scarce target domain. This transferable knowledge serves as a prior that biases target-domain predictions and prevents the target-domain model from overfitting. Specifically, we explore structural priors that encode relational knowledge between different data entities, which provides more informative bias than traditional priors. The choice of the structural prior depends on the information availability and the similarity between the two domains. Depending on the domain similarity and the information availability, we divide the transfer learning problem into four major categories and propose different structural priors to solve each of these sub-problems. This thesis first focuses on the unsupervised-domain-adaptation problem, where we propose to minimize domain discrepancy by transforming labeled source-domain data to be close to unlabeled target-domain data. For this problem, the categories remain the same across the two domains and hence we assume that the structural relationship between the source-domain samples is carried over to the target domain. Thus, graph or hyper-graph is constructed as the structural prior from both domains and a graph/hyper-graph matching formulation is used to transform samples in the source domain to be closer to samples in the target domain. An efficient optimization scheme is then proposed to tackle the time and memory inefficiencies associated with the matching problem. The few-shot learning problem is studied next, where we propose to transfer knowledge from source-domain categories containing abundantly labeled data to novel categories in the target domain that contains only few labeled data. The knowledge transfer biases the novel category predictions and prevents the model from overfitting. The knowledge is encoded using a neural-network-based prior that transforms a data sample to its corresponding class prototype. This neural network is trained from the source-domain data and applied to the target-domain data, where it transforms the few-shot samples to the novel-class prototypes for better recognition performance. The few-shot learning problem is then extended to the situation, where we do not have access to the source-domain data but only have access to the source-domain class prototypes. In this limited information setting, parametric neural-network-based priors would overfit to the source-class prototypes and hence we seek a non-parametric-based prior using manifolds. A piecewise linear manifold is used as a structural prior to fit the source-domain-class prototypes. This structure is extended to the target domain, where the novel-class prototypes are found by projecting the few-shot samples onto the manifold. Finally, the zero-shot learning problem is addressed, which is an extreme case of the few-shot learning problem where we do not have any labeled data in the target domain. However, we have high-level information for both the source and target domain categories in the form of semantic descriptors. We learn the relation between the sample space and the semantic space, using a regularized neural network so that classification of the novel categories can be carried out in a common representation space. This same neural network is then used in the target domain to relate the two spaces. In case we want to generate data for the novel categories in the target domain, we can use a constrained generative adversarial network instead of a traditional neural network. Thus, we use structural priors like graphs, neural networks and manifolds to relate various data entities like samples, prototypes and semantics for these different transfer learning sub-problems. We explore additional post-processing steps like pseudo-labeling, domain adaptation and calibration and enforce algorithmic and architectural constraints to further improve recognition performance. Experimental results on standard transfer learning image recognition datasets produced competitive results with respect to previous work. Further experimentation and analyses of these methods provided better understanding of machine learning as well.

Unsupervised domain adaptation aims to transfer knowledge from labeled source domain to unlabeled target domain. Recently, multisource domain adaptation (MDA) has begun to attract attention. Its performance should go beyond simply mixing all source domains together for knowledge transfer. In this article, we propose a novel prototype-based method for MDA. Specifically, for solving the problem that the target domain has no label, we use the prototype to transfer the semantic category information from source domains to target domain. First, a feature extraction network is applied to both source and target domains to obtain the extracted features from which the domain-invariant features and domain-specific features will be disentangled. Then, based on these two kinds of features, the named inherent class prototypes and domain prototypes are estimated, respectively. Then a prototype mapping to the extracted feature space is learned in the feature reconstruction process. Thus, the class prototypes for all source and target domains can be constructed in the extracted feature space based on the previous domain prototypes and inherent class prototypes. By forcing the extracted features are close to the corresponding class prototypes for all domains, the feature extraction network is progressively adjusted. In the end, the inherent class prototypes are used as a classifier in the target domain. Our contribution is that through the inherent class prototypes and domain prototypes, the semantic category information from source domains is transformed into the target domain by constructing the corresponding class prototypes. In our method, all source and target domains are aligned twice at the feature level for better domain-invariant features and more closer features to the class prototypes, respectively. Several experiments on public data sets also prove the effectiveness of our method.

Domain adaptation has achieved promising results in many areas, such as image classification and object recognition. Although a lot of algorithms have been proposed to solve the task with different domain distributions, it remains a challenge for multi-source unsupervised domain adaptation. In addition, most of the existing algorithms learn a classifier on the source domain and predict the labels for the target data, which indicates that only the knowledge derived from the hyperplane is transferred to the target domain and the structure information is ignored. In light of this, we propose a novel algorithm for multi-source unsupervised domain adaptation. Generally speaking, we aim to preserve the whole structure from source domains and transfer it to serve the task on the target domain. The source and target data are put together for clustering, which simultaneously explores the structures of the source and target domains. The structure-preserved information from source domain further guides the clustering process on the target domain. Extensive experiments on two widely used databases on object recognition and face identification show the substantial improvement of our proposed approach over several state-of-the-art methods. Especially, our algorithm can take use of multi-source domains and achieve robust and better performance compared with the single source domain adaptation methods.

In many real-world applications, the domain of model learning (referred as source domain) is usually inconsistent with or even different from the domain of testing (referred as target domain), which makes the learnt model degenerate in target domain, i.e., the test domain. To alleviate the discrepancy between source and target domains, we propose a domain adaptation method, named as Bi-shifting Auto-Encoder network (BAE). The proposed BAE attempts to shift source domain samples to target domain, and also shift the target domain samples to source domain. The non-linear transformation of BAE ensures the feasibility of shifting between domains, and the distribution consistency between the shifted domain and the desirable domain is constrained by sparse reconstruction between them. As a result, the shifted source domain is supervised and follows similar distribution as target domain. Therefore, any supervised method can be applied on the shifted source domain to train a classifier for classification in target domain. The proposed method is evaluated on three domain adaptation scenarios of face recognition, i.e., domain adaptation across view angle, ethnicity, and imaging sensor, and the promising results demonstrate that our proposed BAE can shift samples between domains and thus effectively deal with the domain discrepancy.

When deep neural networks are deployed in a highly automated vehicle for environment perception tasks in an unseen (target) domain that differs from the training (source) domain, the mismatch will result in decreased performance. Domain adaptation methods aim at overcoming this mismatch. Many recently investigated methods for unsupervised domain adaptation train a model using labeled source data and unlabeled target data at the same time. These methods assume that data from the target domain is available during the source domain training, which is not always the case in real applications. In this paper we present a way to perform an online style transfer for continual domain adaptation which improves performance on (multiple) unseen target domains using a given perception model. The approach is based on an image style transfer in the frequency domain and requires neither an adjustment of the given source-trained model parameters to the target domain, nor does it require any considerable amount of memory for storing its frequency domain representation of the source domain style, which is particularly important considering the hardware limitations in an autonomous vehicle.

Dual contrastive universal adaptation network for multi-source visual recognition

Automated electrocardiogram classification can facilitate cheaper and more accessible arrhythmia and cardiovascular diagnoses for patients. However, clinical machine learning models fail in the real world when the data of interest is collected under different conditions to the training data e.g. due to a different hospital, demographic group, equipment. These differing data collection conditions are known as the target and source domains, respectively. While it is time-consuming and costly to obtain labeled data from the target domain, unlabeled target domain data is more readily available. Unsupervised domain adaptation from a source domain to an unlabeled target domain can unlock more widespread clinical use of machine learning models, including for arrhythmia classification. In this paper, we show that uncertainty objectives can improve arrhythmia classification on new datasets. We apply a Dirichlet Prior Network to test two novel approaches: the first minimizes target domain uncertainty to encourage domain alignment, while the second aligns the class prediction uncertainty of source and target heartbeats. We demonstrate that these methods improve heartbeat classification of electrocardiograms collected at different hospitals using the MIT-BIH and St. Petersburg INCART arrhythmia datasets. Our first approach improves the baseline target F1 score by 7% for ternary arrhythmia classification, while our second approach improves state-of-the-art domain adaptation performance by 3%.Clinical relevance- This proposes and validates methods applying uncertainty objectives to improve automated arrhythmia classification in new datasets.

We study the problem of visual question answering (VQA) in images by exploiting supervised domain adaptation, where there is a large amount of labeled data in the source domain but only limited labeled data in the target domain, with the goal to train a good target model. A straightforward solution is to fine-tune a pre-trained source model by using those limited labeled target data, but it usually cannot work well due to the considerable difference between the data distributions of the source and target domains. Moreover, the availability of multiple modalities (i.e., images, questions and answers) in VQA poses further challenges in modeling the transferability between various modalities. In this paper, we address the above issues by proposing a novel supervised multi-modal domain adaptation method for VQA to learn joint feature embeddings across different domains and modalities. Specifically, we align the data distributions of the source and target domains by considering those modalities both jointly and separately. Extensive experiments on the benchmark VQA 2.0 and VizWiz datasets demonstrate that our proposed method outperforms the existing state-of-the-art baselines for open-ended VQA in this challenging domain adaptation setting.

The automatic identification of entities like objects, people or their actions in visual data, such as images or video, has significantly improved, and is now being deployed in access control, social media, online retail, autonomous vehicles, and several other applications. This visual recognition capability leverages supervised learning techniques, which require large amounts of labeled training data from the target distribution representative of the particular task at hand. However, collecting such training data might be expensive, require too much time, or even be impossible. In this work, we introduce several novel approaches aiming at compensating for the lack of target training data. Rather than leveraging prior knowledge for building task-specific models, typically easier to train, we focus on developing general visual recognition techniques, where the notion of prior knowledge is better identified by additional information, available during training. Depending on the nature of such information, the learning problem may turn into domain adaptation (DA), domain generalization (DG), leaning using privileged information (LUPI), or domain adaptation with privileged information (DAPI).;When some target data samples are available and additional information in the form of labeled data from a different source is also available, the learning problem becomes domain adaptation. Unlike previous DA work, we introduce two novel approaches for the few-shot learning scenario, which require only very few labeled target samples, and even one can be very effective. The first method exploits a Siamese deep neural network architecture for learning an embedding where visual categories from the source and target distributions are semantically aligned and yet maximally separated. The second approach instead, extends adversarial learning to simultaneously maximize the confusion between source and target domains while achieving semantic alignment.;In complete absence of target data, several cheaply available source datasets related to the target distribution can be leveraged as additional information for learning a task. This is the domain generalization setting. We introduce the first deep learning approach to address the DG problem, by extending a Siamese network architecture for learning a representation of visual categories that is invariant with respect to the sources, while imposing semantic alignment and class separation to maximize generalization performance on unseen target domains.;There are situations in which target data for training might come equipped with additional information that can be modeled as an auxiliary view of the data, and that unfortunately is not available during testing. This is the LUPI scenario. We introduce a novel framework based on

Domain adaptation has become an attractive learning paradigm, as it can leverage source domains with rich labels to deal with classification tasks in an unlabeled target domain. A few recent studies develop domain adaptation approaches for graph-structured data. In the case of node classification task, current domain adaptation methods only focus on the closed-set setting, where source and target domains share the same label space. A more practical assumption is that the target domain may contain new classes that are not included in the source domain. Therefore, in this paper, we introduce a novel and challenging problem for graphs, i.e., open-set domain adaptive node classification, and propose a new approach to solve it. Specifically, we develop an algorithm for efficient knowledge transfer from a labeled source graph to an unlabeled target graph under a separate domain alignment (SDA) strategy, in order to learn discriminative feature representations for the target graph. Our goal is to not only correctly classify target nodes into the known classes, but also classify unseen types of nodes into an unknown class. Experimental results on real-world datasets show that our method outperforms existing methods on graph domain adaptation.

In this paper, we propose a new unsupervised domain adaptation method for document classification. We address the problem of domain adaptation for document classification where the source and target domains do not differ significantly and there is no labeled data in the target domain. In this case, we can use conventional semi-supervised learning. Thus, we use the naive Bayes-based expectation-maximization method (NBEM) which is very effective for document classification. However, NBEM does not utilize the difference between a source domain and a target domain. We combine NBEM with the feature weighted method for domain adaptation, referred to as “self-training feature weight” (STFW). Our proposed method alternately uses NBEM and STFW to gradually improve document classification precision for a target domain. This method significantly outperforms the conventional unsupervised methods for domain adaptation.

Remote sensing (RS) scene classification plays an important role in the field of earth observation. With the rapid development of the RS techniques, a large number of RS scene images are available. As manually labeling large-scale RS scene images is both labor and time consuming, when a new unlabeled data set is obtained, how to use the existing labeled data sets to classify the new unlabeled images is an important research direction. Different RS scene image data sets may be taken from different type of sensors, and the images may vary from imaging modalities, spatial resolutions, and image scales, so the distribution discrepancy exists among different image data sets. As a result, simply applying convolutional neural networks (CNN) trained on source domain cannot accurately classify the images on target domain. Domain adaptation (DA) can be helpful to solve this problem. In this letter, we design a subspace alignment (SA) and CNN-based framework to solve the DA problem in RS scene image classification. A new SA layer is proposed and added into CNN models for DA, which could align the source and target domains in some feature subspace. Fine-tuning the modified CNN model with the added SA layer makes the CNN model adapt to the aligned feature subspace and helps to relieve the domain distribution discrepancy. The experiments conducted on two public data sets show that adding the SA layer into CNN improves the scene classification on the target domain.