EEGRA: Energy Efficient Geographic Routing Algorithms for Wireless Sensor Network

Recently, network localization systems that are based on inter-node ranges have received significant attention. Geographic routing has been considered an application which can utilize the location information from these localization systems. In this paper, we firstly recognize that sensor network localization algorithms generate positioning data with different error patterns compared to those networks where node positions are determined directly from GNSS measurements. Secondly, by simulating practical sensor network scenarios using data from our localization algorithm, we observe that existing geographic routing algorithms in wireless sensor networks (WSNs) adopt very simplistic methods in the treatment of position error, without due consideration of error distribution. Additionally, an insight is given into localization algorithms for WSNs with inhomogeneous error environments. Our observations represent an initial step toward a detailed understanding and design of efficient geographic routing algorithms in location aware WSNs.

Wireless Sensor Networks (WSNs) are usually comprised of a large number of sensor nodes which have limited power resources and require energy efficient routing algorithms. We have presented an Adaptive Transmission Power - Geographical and Energy Aware Routing (ATP-GEAR) algorithm in this paper, which routes the packet towards the destination by calculating the cost of the neighbors of a node in terms of their location and current battery level and transmitting the packet to the lowest costing node with the minimum required transmission power. We analyze the performance of our algorithm based on total power consumption and end-to-end delay from source to destination. Simulation results show that ATP-GEAR yields almost 25% less power consumption and 17% less end-to-end delay when compared with traditional Cluster Based Routing (CBR).

Wireless sensor networks area collection of a large number of unattended sensor nodes. The sensor nodes are dynamically deployed in the region. In wireless sensor networks, the unlicensed sensor nodes use their temporarily available vacant licensed channels or spectrum band in a telecommunication network. The many open challenges with issues such as adaptive in self-organisation, fault-tolerance and network scalability with cooperative spectrum sensing and sharing are identifying new challenges in wireless sensor networks. In this paper, we proposed the bio-inspired adaptive routing algorithm for cognitive radio wireless sensor networks. The utilisation of the foraging approach of ANTs and BEEs for making the decision of using the available spectrum sensing and sharing of channels over multi-hops communication, provides the method to utilise idle channel and decrease the delay for communication in wireless sensor network. In this paper, we design the algorithm to solve the issue of wireless sensor network and performance of classical routing protocol LEACH and cognitive radio sensor networks (CRSN) evaluates the parameters which proof the self-organisation routing algorithm.

SummaryAnt colony optimization (ACO) and unequal clustering algorithms in wireless sensor networks (WSNs) prove their efficiency in protracting the network lifetime. However, the existing ACO and unequal clustering algorithms, respectively, do not consider jointly energy efficiency and reliability and focus only on some normal parameters to adjust the cluster radius, then neglecting the cluster head (CH) neighborhood information as it is wise to reduce the cluster radius when there are more neighbor CHs in order to balance the load and energy consumption. To resolve these problems, we propose a fault‐tolerant distributed ACO‐based routing (DACOR) protocol for mitigating the hot spot problem in fog‐enabled WSN architecture. To improve the performance of the network, we propose a multiple fog nodes (FNs) and unequal clustering‐based network model. The proposed model is energy efficient as it avoids repetitive clustering and affects CHs to FNs based on distance. Also, unlike the existing works which use either single FN/sink‐based unequal clustering or multiple FNs/sinks to mitigate hot spot problem, we propose to distribute unequal clustering to multiple FNs (partitions). Additionally, we formulate a different rule to calculate the cluster radius based on significant parameters ensuring energy efficiency and balancing. To route data from source to destination, we devise a new probabilistic formula which considers not only energy efficiency but also reliability. The performance of the proposed DACOR protocol has been investigated under different scenarios through simulations. The results show that the proposed DACOR protocol outperforms the existing protocols in terms of various main metrics.

Automatic localization is one of the major issues in Wireless Sensor Networks (WSN). DV-hop algorithm is a well-known localization algorithm in WSN but with limited localization accuracy. In this paper, an improved DV-hop localization algorithm in hybrid optical wireless sensor networks is proposed based on the optimization of the parameters in WSN. Various factors that affect the localization accuracy of the DV-hop algorithm in WSN are investigated, including the communication radius of the node, the number of beacon nodes and the number of the total nodes. As the DV-hop algorithm is applied into hybrid optical sensor and WSNs (O-WSN) with rectangular topology, different parameters have to be optimized accordingly. Simulation results show that the square topology outperforms the rectangle topology more than 45 % under the same network parameters using the improved DV-hop algorithm. Therefore another improved DV-hop called Sub-Square Weighted DV-hop (SSW DV-hop) is proposed for the rectangle topology. Both simulation and experiment results demonstrate that applying the SSW DV-hop algorithmin O-WSNs could significantly improve the localization accuracy.

Wireless sensor networks (WSNs) have shown to be an efficient solution for physical parameters monitoring and activity detection. WSNs are usually designed using single optimization by optimizing one objective function such as energy consumption taking some constraints into consideration. In multi-objective optimization (MOPT) multiple and often conflicting objectives need to be optimized while satisfying some constraints. This paper proposes MOPT-based routing and flow rate assignment methodologies for WSNs. The first methodology employs Karush-Kuhn-Tucker (KKT) conditions to find the optimal solution, while the second one is based on genetic algorithms (GA). A new formulation is introduced jointly minimize the energy and the delay. Performance metrics such as the average end-to-end delay and energy consumption are evaluated and compared with those of previous work, namely the hybrid geographical routing (HGR) algorithm. The proposed work helps network designers to address design procedures efficiently and increase the flexibility in the energy delay tradeoff for communications in WSNs.

MANETs are collections of wireless nodes that can dynamically establish a network at any time at any place without using any fixed infrastructure. Due to dynamically changing topology routing in such network is very difficult. Traditional routing algorithms like distance vector and link state consumes more energy and less scalable. So we go for location based routing algorithms. Geographic routing is one of the most promising routing schemes in wireless sensor networks (WSNs), due to its simplicity, scalability, and efficiency. Unlike topological routing algorithms, they do not need to exchange and maintain routing information and work nearly stateless. This makes geographic routing attractive for wireless ad hoc and sensor networks. Most geographic routing algorithms use a greedy strategy that tries to approach the destination in each step. Even though they are scalable and simple energy consumption is very high. Here we introduce one new algorithm called GDBN sleep scheduling algorithm to reduce energy consumption. And compare the energy consumption with the normal geographic routing.

Efficient and reliable routing plays a key role in wireless sensor networks in which routing design with regard to network availability and node lifetime needs to be deliberately considered. When multi-hop relay transmission is frequently applied to reduce a source node's energy consumption and improve network capacity, a key issue affecting the nodes' participation in the transmission is the problem of suitably determining the next hop in order to prolong each node's lifetime and to maintain the energy-balancing of the whole network. In this study, we propose an energy-aware routing scheme by taking the Cauchy operator, node's residual energy and routing distance into account. Based on Cauchy inequation, we achieve a relationship between the routing distance and the energy usage in the routing. By fixing a relay selection parameter and then identifying the next hop appropriately, we obtain a balancing energy-aware routing algorithm. Numerical results are provided to verify the lifetime and equilibrium of the energy distribution by comparing with them with those of a traditional approach.

Appropriate clustering and routing algorithms in multi-hop wireless sensor networks considerably affect the energy consumption and prolong the network lifetime. Besides, the required inter-cluster communications in these networks may lead to imbalanced energy consumption among cluster-heads that in turn decreases the network lifetime. In this paper, a gradient-based clustering algorithm for energy-efficient routing (GCER) in wireless sensor networks is proposed. The main idea is based on partitioning the sensing region in such a way that the total energy consumption of the network is minimized. The algorithm uses unequal clustering structure which balances the energy consumption among the cluster-heads and lessens the effect of hotspot problem. Furthermore, a distributed protocol for choosing cluster-heads and routing is deployed to balance the energy among all sensor nodes. Simulation results show that the proposed scheme balances the energy consumption among the cluster-heads and increases the network lifetime compared to some recent reported clustering schemes in the literature.

Wireless sensor networks (WSNs) are being used in a wide variety of critical applications such as military and health‐care applications. Such networks, which are composed of sensor nodes with limited memory capacity, limited processing capabilities, and most importantly limited energy supply, require routing protocols that take into consideration these constraints. The aim of this paper is to provide an efficient power aware routing algorithm for WSNs that guarantees QOS and at the same time minimizes energy consumption by calculating the remaining battery capacity of nodes and taking advantage of the battery recovery process. We present an online‐battery aware geographic routing algorithm. To show the effectiveness of our approach, we simulated our algorithm in ns2 and compared it with greedy perimeter stateless routing for wireless networks and battery‐aware routing for streaming data transmissions in WSNs. Copyright © 2009 John Wiley & Sons, Ltd.

Recent years have witnessed a proliferation of routing algorithms for Wireless Sensor Networks (WSNs), hence complicating the choice of the proper algorithm to be used for a given application. Simulation frameworks represent a viable solution to anticipate crucial choices, however existing solutions do not encompass the impact of changes (e.g., route updates, node crashes) on the nodes behavior and vice-versa. This article proposes a novel adaptive modeling approach to master the complexity of the thorough simulation of routing algorithms for WSN. Experimental results are provided showing the effectiveness of the proposed approach at managing changes, and dealing with detailed aspects, during the simulation and comparison of several routing algorithms.

Energy efficiency is a key concern and challenging research issue during the design of routing algorithms for wireless sensor networks (WSNs). In order to effectively improve the energy utilization of each sensor node and network performance, mobility technology has been widely concerned. Since the implement of mobile sink node is relatively easier than normal sensor nodes, sink mobility technology has attracted much research interest in recent years. In this paper, we propose a mobile-sink routing algorithm based on energy and distance for WSNs. Trajectories of mobile sink nodes is predictable to improve energy efficiency of sensor networks. We first lay emphasis on the study of the selection of mobile sink node number and the selection of park positions, as well as their impact on energy consumption and network lifetime. Simulation results show that both the mobile sink nodes number and park positions have great influence on network performance, and our algorithm outperforms random movement and LEACH algorithm in terms of performance like energy consumption.

In order to gather information more efficiently, wireless sensor networks (WSNs) are partitioned into clusters. The most of the proposed clustering algorithms do not consider the location of the base station. This situation causes hot spots problem in multi-hop WSNs. Unequal clustering mechanisms, which are designed by considering the base station location, solve this problem. In this paper, we introduce a fuzzy unequal clustering algorithm (EAUCF) which aims to prolong the lifetime of WSNs. EAUCF adjusts the cluster-head radius considering the residual energy and the distance to the base station parameters of the sensor nodes. This helps decreasing the intra-cluster work of the sensor nodes which are closer to the base station or have lower battery level. We utilize fuzzy logic for handling the uncertainties in cluster-head radius estimation. We compare our algorithm with some popular algorithms in literature, namely LEACH, CHEF and EEUC, according to First Node Dies (FND), Half of the Nodes Alive (HNA) and energy-efficiency metrics. Our simulation results show that EAUCF performs better than the other algorithms in most of the cases. Therefore, EAUCF is a stable and energy-efficient clustering algorithm to be utilized in any real time WSN application.

Packet dropping and modification are common attacks that can be launched by an adversary to disrupt communication in wireless multihop sensor networks. Many schemes have been proposed to mitigate or tolerate such attacks, but very few can effectively and efficiently identify the intruders. To address this problem, we propose a simple yet effective scheme, which can identify misbehaving forwarders that drop or modify packets. Extensive analysis and simulations have been conducted to verify the effectiveness and efficiency of the scheme.

Popularity of Mobile Wireless Sensor Network (MWSN) has increased tremendously due to the ability to connect the physical world with the virtual world. In MWSN, Sensor nodes move freely in a target area without the need of any special infrastructure. MWSN has attracted many researchers as it has introduced unique challenges in aspects like resource management, coverage, routing protocols, security in many applications such as target tracking in military applications, detection of catastrophic events, environment monitoring, health applications etc. Due to mobility, routing process in MWSN has become more complicated as connections in the network can change dynamically. This paper proposes a Mobility-Aware Multi-Objective Hybrid Routing Algorithm (MMOHRA) for Wireless Sensor Network (WSN). MMOHRA selects the best route and forwards the data packets from source to sink using multiple metrics such as Average Energy consumption, Control Overhead, Reaction Time, LQI, and HOP Count. Performance of MMOHRA is compared with Simple Hybrid Routing Protocol (SHRP) and Dynamic Multi-objective Routing Algorithm (DyMORA) using metrics such as Average Energy Consumption, Packet Delivery Ratio, and Jitter. MMOHRA improves the Average Energy Consumption (AEC) by a factor of 14.1% as compared with SHRP and 8.13 % as compared to DyMORA. MMOHRA outperformed SHRP and DyMORA in terms of packet Delivery Ratio (PDR) by 10.17 % and 9.83 % respectively.