Energy efficient min delay-based geocast routing protocol for the internet of vehicles

In recent times, different routing protocols have been proposed in the Internet of Things enabled Underwater Wireless Sensor Networks (IoT-UWSNs) to explore the underwater environment for different purposes, i.e., scientific and military purposes. However, high Energy Consumption (EC), End to End (E2E) delay, low Packet Delivery Ratio (PDR) and minimum network lifetime make the energy efficient communication a challenging task in Underwater Wireless Sensor Network (UWSN). The high E2E delay, EC and reliable data delivery are the critical issues, which play an important role to enhance the network throughput. So, this paper presents two energy efficient routing protocols namely: Shortest Path-Collision avoidance Based Energy Efficient Routing (SP-CBE2R) protocol and Improved-Collision avoidance Based Energy Efficient Routing (Im-CBE2R) protocol. At this end, both routing protocols minimize the probability of void hole occurrence and in return minimizes the EC and E2E delay. In both routing protocols, courier nodes are positioned at different strategic locations to keep the greedy forwarding continuous. The proposed routing protocols are also analyzed by varying the Packet Size (PS) and Data Rate (DR). Additionally, various simulations have been performed to authenticate the proposed routing protocols. Simulation results show that the proposed routing protocols outperform the baseline routing protocols in counterparts.

Introduction: This article is the result of the research “Energy efficient routing protocols in wireless sensor network: Examine the impact of M-SEEC routing protocols on the lifetime of WSN with an energy efficient TABU optimization routing protocol”developed in the IKG, Punjab Technical University, India in 2019.Problem: The task of finding and maintaining routes in WSNs is non-trivialsince energy restrictions and sudden changes in node status cause frequent and unpredictable changes.Objective: The objective of this paper is to propose an energy efficient heterogeneous protocolwith the help of a hybrid meta-heuristic technique.Methodology: In the hybrid meta-heuristic technique, the shortest route has been selected and the data forwarded to the sink in a minimal time span,savingenergy and making the network more stable. To evaluate the technique, a new hybrid technique has been created where the data transmission is implemented from the beginning under MATLAB 2013a.Results: The proposed technique is better than the existing ones since the remaining energy in the network is increased by 62% compared to normal nodes in MSEEC, 65% compared to advanced nodes in MSEEC and 70% compared to super nodes in MSEEC. The network lifetime was also enhanced by 70.8% compared to MSEEC.Conclusion: The proposed protocol was found to be superior based on the average residual energy.This paper proposes an efficient routing mechanism towards the energy efficient network.Originality: Through this research, a novel version of MSEEC protocol is carried out using the TABU search mechanism to generate the functions of two neighbourhoods to detect the optimum path with the aim of maximizing the network lifetime in an area of 200×200m2.Limitations: The lack of other routing techniques falls under swarm intelligence.

Wireless Sensor Networks (WSNs) being special type of wireless communication networks, characterized via various specific features like Limited Memory, Energy, Less Processing power. In Wireless Sensor Networks, every sensor node actively participates in routing work by forwarding the packets from sender to receiver and the packet forwarding is entirely based on network topology. One of the most important issue surrounding WSNs is Energy Efficiency and Efficient Routing mechanism which should be dynamic and efficient enough to handle changing topologies. So, there is utmost need for optimization techniques which can lay the foundation of development of suitable routing protocol to attain energy efficiency and routing in sensor networks. Swarm Intelligence is one the most important technique which is highly considered for developing energy efficient routing protocols. Considering Swarm Intelligence, Ant Colony Optimization (ACO) technique is utilized to propose Energy Efficient protocol for WSN. In this paper, a Novel Energy Efficient Routing Protocol based on ACO for WSN is proposed i.e. IEEMARP (Improvised Energy Efficient Multipath Ant Based Routing Protocol). Hardcore testing of protocol proposed i.e. IEEMARP is done in different simulation scenarios using NS-2 simulator on varied parameters like Packet Delivery Ratio, Throughput, Routing Overhead, Energy Consumption and End-To-End Delay and performance is compared with other routing protocols like Basic ACO, DSDV, DSR, ACEAMR, Ant Chain, EMCBR and IACR. The results states that IEEMARP is almost 7 to 10 times better in different parameters. It has also been observed that IEEMARP routing protocol is also efficient in transmitting TCP packets.

An energy efficient routing protocol is the major concern in Wireless Sensor Networks (WSNs). In this survey paper, we present energy efficient hierarchical routing protocols, developed from conventional LEACH routing protocol. Main focus of our study is how these extended protocols work in order to increase the life time and how quality routing protocol are improved for WSNs. Furthermore, this paper also highlights some of the issues faced by LEACH and also explains how these issues are tackled by extended versions of LEACH. We compare the features and performance issues of the selected hierarchical routing protocols.

The vital part to prolong the active time of Wireless Senor Network (WSN) is to reduce the transmission energy consumption between individual nodes/path belonging to the network. In order to minimize the transmission energy consumption in the network, a novel methodology called a “sleeping pill” packet into the network has been proposed. This technique has reduced 4% of energy consumption in a transmission experiment for 10,000 packets at -25dBm transmission power. This transmission experiment was carried out by transmitting a new packet of size 108 bytes for every 3 seconds leading to a total transmission time of 8 hours 33 minutes. This methodology has a potential to increase the lifetime of the network to about 60% for multi-hop multipath routing protocols. These measurements and comparisons are first step towards energy efficient multi-hop routing protocol in a mesh network. This study also investigates various connectivity issues and energy consumption scenario that prevail in real world situation. The experiments were done and analyzed various performance issues which arise due to deployment/distribution of the sensor for the multi-hop network according to the environment. These experiments provide more insights to reduce the packet loss and effective energy utilization of the nodes in the network. One of the focuses of this research work is on establishing the correlation between Link Quality Indicator (LQI) values to the Packet delivery ratio (PDR) based on environment. These methodical analyses play an important role in energy efficient mesh routing protocol and deployment.

Designing and development of energy effective path planning algorithm is very key research domain in order to tackle the issues of limited life-time for Wireless Sensor Networks (WSNs). So in WSNs, energy efficiency is major concern of researchers. Overall advancement in routing protocols prove that clustering is much better approach as compared to flat and location-based energy efficient routing protocols. Due to better performance, multiple energy efficient clustering routing protocols have been proposed. But existing clustering algorithms are centralized or distributed, which are not intelligent enough and do not produce hybrid cluster-head selection. In this paper, we propose a cluster structured path planning algorithm named, Hybrid Advance Distributed Centralized Clustering (HADCC) path planning energy efficient algorithm. HADCC proposed model is fascinated with hybrid cluster head selection algorithm. This hybrid algorithm makes decision of cluster head selection of nodes. In order to execute proposed model we have also proposed an advance network topology, in which the whole network region is divided into two physical levels. First physical level consists of a circular region, containing homogeneous normal nodes and all important Base Station. While, second physical level is outer region of the circle that contains advanced heterogeneous nodes. Simulation results indicate that HADCC prolongs the network lifetime as compared to existing advanced clustering routing protocols for both homogeneous and heterogeneous WSNs. HADCC outperforms in case of stability and network life time as compared to the existing clustering algorithms.

<p>Energy efficiency has been considered as the most important issue in wireless sensor networks. As in many applications, wireless sensors are scattered in a wide harsh area, where the battery replacement or charging will be quite difficult and it is the most important challenge. Therefore, the design of energy saving mechanism becomes mandatory in most recent research. In this paper, a new energy efficient clustered routing protocol is proposed: the proposed protocol is based on analyzing the data collected from the sensors in a base-station. Based on this analysis the cluster head will be selected as the one with the most useful data. Then, a variable time slot is specified to each sensor to minimize the transmission of repetitive and un-useful data. The proposed protocol Data-Based Energy Efficient Clustered Routing Protocol for Wireless Sensors Networks (DCRP) was compared with the famous energy efficient LEACH protocol and also with one of the recent energy efficient routing protocols named Position Responsive Routing Protocol (PRRP). DCRP has been used in monitoring the floods in Tabuk area –Saudi Arabia. It shows comparatively better results.</p>

The unique characteristics of Underwater Wireless Sensor Networks (UWSNs) attracted the research community to explore different aspects of these networks. Routing is one of the most important and challenging function in UWSNs, for efficient data communication and longevity of sensor node's battery timing. Sensor nodes have energy constraint because replacing the batteries of sensor nodes is an expensive and tough task in harsh aqueous environment. Also interference is a major performance influencing factor. Providing solutions for interference-free communication are also essential. In this paper, we propose three energy-efficient and interference-aware routing protocols named as Inverse Energy Efficient Depth-Based Routing protocol (IEEDBR), Interference-Aware Energy Efficient Depth-Based Routing protocol (IA-EEDBR) and Interference-Aware Inverse Energy Efficient Depth-Based Routing protocol (IA-IEEDBR). Unlike EEDBR, IEEDBR protocol uses depth and minimum residual energy information for selecting data forwarder. While IA-EEDBR takes minimum number of neighbors for forwarder selection. IA-IEEDBR considers depth, minimum residual energy along with minimum number of neighbors for selection of forwarder. Our proposed schemes are validated through simulation and the results demonstrate better performance in terms of improved network lifetime, maximized throughput and reduced path loss.

Hybrid Boosted Chameleon and modified Honey Badger optimization algorithm-based energy efficient cluster routing protocol for cognitive radio sensor network

Wireless sensor networks (WSNs) are widely applied in monitoring and communication but remain constrained by limited energy resources. Efficient routing protocols are critical to prolong network lifetime and ensure balanced energy consumption among sensor nodes. Traditional cluster-based routing often fails to achieve optimal energy balance, leading to premature node failures and degraded performance. Intelligent optimization algorithms, including meta heuristics such as particle swarm optimization (PSO) and emperor penguin optimization (EPO), have been applied to improve routing efficiency. These methods enhance convergence and adaptability but typically operate as standalone approaches. Limited attention has been given to integrating multi criteria decision making (MCDM) methods with meta heuristics. Without this integration, assigning precise weights to multiple criteria and balancing energy consumption across nodes remains difficult. This paper proposes a novel uneven cluster-based routing protocol that integrates fuzzy constrained nonlinear programming- variable weight analysis-technique for order preference by similarity to ideal solution (FCNP-VWA-TOPSIS) with an improved EPO. The protocol first assigns accurate weights to seven multi criteria using FCNP VWA and selects cluster heads (CHs) with TOPSIS. It then constructs the routing tree using improved EPO guided by the weighted fitness function. Extensive simulations show that the proposed protocol achieves superior energy balance, extending network lifetime by 158.0%, 119.3%, and 113.7% compared to uneven clustering routing (UCR), unequal clustering fuzzy logic intelligent algorithm (UCFIA), and fuzzy multi-criteria clustering and bio-inspired energy-efficient routing (FMCB ER), respectively. By combining MCDM and meta heuristic optimization, the protocol advances cluster-based routing in WSNs, significantly enhancing energy efficiency and reliability for real world applications.

Recent technological advances in communication sector have resulted in the development and improvement of wireless sensor networks consisting of low cost, low power and smaller multi-functional sensor units. Limited battery life of sensor nodes is one of the critical issues in wireless sensor networks. Energy dissipation for data transfer from nodes to base station is the crucial cause of energy depletion. A wide variety of routing protocols were introduced to increase the lifespan of the network and the most efficient scheme is clustering of nodes within the network that works on the principle of divide & conquer and data aggregation. This paper proposes an energy efficient routing protocol EEM-LEACH that discovers a multi-hop path with minimum communication cost from each node to the base station. If the communication cost for direct data transfer is minimum, nodes close to the base station can send data directly to the base station thereby preventing them from dying soon. Only nodes with maximum residual energy and minimum energy consumption can become cluster heads since each node's residual energy as well as average energy consumption is considered for the selection of cluster heads. No global information is needed because cluster formation and multi-hop path selection are distributed. As communication cost per packet is minimized and relay nodes have more residual energy, the network lifetime can be improved.

It is critical to design energy-efficient routing protocols for battery-limited mobile ad hoc networks, especially in which the energy-consuming MIMO techniques are employed. However, there are several challenges in such a design: first, it is difficult to characterize the energy consumption of a MIMO-based link; second, without a careful design, the broadcasted RREP packets, which are used in most energy-efficient routing protocols, could flood over the networks, and the destination node cannot decide when to reply the communication request; third, due to node mobility and persistent channel degradation, the selected route paths would break down frequently and hence the protocol overhead is increased further. To address these issues, in this paper, a novel Greedy Energy-Efficient Routing (GEER) protocol is proposed: (a) a generalized energy consumption model for the MIMO-based link, considering the trade-off between multiplexing and diversity gains, is derived to minimize link energy consumption and obtain the optimal transmit model; (b) a simple greedy route discovery algorithm and a novel adaptive reply strategy are adopted to speed up path setup with a reduced establishment overhead; (c) a lightweight route maintenance mechanism is introduced to adaptively rebuild the broken links. Extensive simulation results show that, in comparison with the conventional solutions, the proposed GEER protocol can significantly reduce the energy consumption by up to 68.74%.

In recent years, several investigations have been made on "challenged network" [also known as, delay tolerant network (DTN)] architectures highlighting their advantages and disadvantages. In spite of its inherent shortcomings of unreliability and delay, smart-phone based opportunistic network is gaining immense popularity in the research community due to its applicability in different adverse and extreme communication scenarios where traditional communication infrastructure is either unavailable or incapacitated for a long time. Considerable research has been conducted till date to design efficient network architecture for emergency data dissemination in intermittently connected/challenged networks. Different architectures (ranging from flat to multi-tier) are proposed for implementing opportunistic DTN keeping in view of specific application requirements. However, very few of these proposed architectures have been examined from the perspective of a post disaster communication. Moreover, most DTN architectures are designed by aiming towards increasing delivery probability and reducing latency and as a whole, maximizing network throughput; with very little emphasis on its energy efficiency. The impact of different mobility patterns on existing DTN routing algorithms with respect to data dissemination and energy consumption has also not been studied so far. Our objective, in this paper, is to investigate the impact of different mobility patterns on existing DTN routing protocols and existing DTN architectures and subsequently, come up with a suitable energy efficient DTN framework combining suitable architecture and routing protocol that may be used to offer different disaster management services during post-disaster relief operation. We have done an extensive simulation on ONE simulator with different categories of well-known existing DTN architectures, mobility models, DTN routing protocols to study the network performance in terms of delivery probability, energy efficiency and overhead ratio. Based on the simulation results, we have tried to figure out a suitable combination of energy efficient architecture, mobility model and routing protocol that fits well in the post disaster communication scenario.

ABSTRACTWireless Sensor Networks (WSN) are utilized mostly for the collection of data, specifically to perform complex schemes. Thus, the issues of sensor networks and mission‐critical sensors are the implementation of Energy Efficiency (EE) routing protocols. Thus, the EE routing protocol in the WSN model is developed in this work to improve the lifespan of the network for the WSN. The Fuzzy C‐Means (FCM) clustering is performed for generating cluster groups and here the CHs are optimized using the Best and Worst Fitness of Sailfish Whale Optimization (BWF‐SWO). To further evaluate the efficacy of the network, the fitness function is considered by Intra and Inter‐cluster Distance and Residual Energy. To determine the efficiency of the routing process, diverse constraints like shortest path distance, throughput, energy consumption, hop count, latency, and Packet Delivery Ratio (PDR) are considered. In the end, the performance is calculated using divergent parameters and contrasted against existing methodologies. From the results, the energy consumption of the implemented EE protocol in WSN is minimized by 55% of RPO, 10% of COA, 20% of SFO, and 50% of WOA appropriately when the node count is 100. Thus, the findings explored that the proposed protocol achieved enriched outcomes on energy‐efficient routing in the WSN model.

Wireless sensor networks (WSNs) are being applied widely for data collection, especially to carry out the mission-critical tasks. Therefore, one of the most challenging tasks of mission-critical sensors and sensor networks is the development of energy efficient (EE) routing protocols. Comparing with flat routing protocols, more EE can be achieved in hierarchical routing protocols. In this paper, we propose an enhanced balanced energy efficient network-integrated super-heterogeneous (E-BEENISH) routing protocol, by analyzing communication energy consumption of the clusters and a large range of energy levels in heterogeneous WSNs. E-BEENISH is based on weighted election probabilities of each node to become a cluster head according to the remaining energy and the distance from the sink to the node. Moreover, we also study the impact of the heterogeneity of nodes in terms of energy. Studying the sensitivity of our stable election protocol, we conclude heterogeneity parameters capturing energy imbalance in the network and find that the E-BEENISH yields the longer stability region for the suitable weight of energy and distance. Our results show by simulation that the E-BEENISH can improve system lifetime by an order of magnitude compared to obtained using current clustering protocols, which is crucial for many applications.