Smart packet: Energy efficient multi-hop routing protocol

In recent times, different routing protocols have been proposed in the Internet of Things enabled Underwater Wireless Sensor Networks (IoT-UWSNs) to explore the underwater environment for different purposes, i.e., scientific and military purposes. However, high Energy Consumption (EC), End to End (E2E) delay, low Packet Delivery Ratio (PDR) and minimum network lifetime make the energy efficient communication a challenging task in Underwater Wireless Sensor Network (UWSN). The high E2E delay, EC and reliable data delivery are the critical issues, which play an important role to enhance the network throughput. So, this paper presents two energy efficient routing protocols namely: Shortest Path-Collision avoidance Based Energy Efficient Routing (SP-CBE2R) protocol and Improved-Collision avoidance Based Energy Efficient Routing (Im-CBE2R) protocol. At this end, both routing protocols minimize the probability of void hole occurrence and in return minimizes the EC and E2E delay. In both routing protocols, courier nodes are positioned at different strategic locations to keep the greedy forwarding continuous. The proposed routing protocols are also analyzed by varying the Packet Size (PS) and Data Rate (DR). Additionally, various simulations have been performed to authenticate the proposed routing protocols. Simulation results show that the proposed routing protocols outperform the baseline routing protocols in counterparts.

Introduction: This article is the result of the research “Energy efficient routing protocols in wireless sensor network: Examine the impact of M-SEEC routing protocols on the lifetime of WSN with an energy efficient TABU optimization routing protocol”developed in the IKG, Punjab Technical University, India in 2019.Problem: The task of finding and maintaining routes in WSNs is non-trivialsince energy restrictions and sudden changes in node status cause frequent and unpredictable changes.Objective: The objective of this paper is to propose an energy efficient heterogeneous protocolwith the help of a hybrid meta-heuristic technique.Methodology: In the hybrid meta-heuristic technique, the shortest route has been selected and the data forwarded to the sink in a minimal time span,savingenergy and making the network more stable. To evaluate the technique, a new hybrid technique has been created where the data transmission is implemented from the beginning under MATLAB 2013a.Results: The proposed technique is better than the existing ones since the remaining energy in the network is increased by 62% compared to normal nodes in MSEEC, 65% compared to advanced nodes in MSEEC and 70% compared to super nodes in MSEEC. The network lifetime was also enhanced by 70.8% compared to MSEEC.Conclusion: The proposed protocol was found to be superior based on the average residual energy.This paper proposes an efficient routing mechanism towards the energy efficient network.Originality: Through this research, a novel version of MSEEC protocol is carried out using the TABU search mechanism to generate the functions of two neighbourhoods to detect the optimum path with the aim of maximizing the network lifetime in an area of 200×200m2.Limitations: The lack of other routing techniques falls under swarm intelligence.

Wireless Sensor Networks (WSNs) being special type of wireless communication networks, characterized via various specific features like Limited Memory, Energy, Less Processing power. In Wireless Sensor Networks, every sensor node actively participates in routing work by forwarding the packets from sender to receiver and the packet forwarding is entirely based on network topology. One of the most important issue surrounding WSNs is Energy Efficiency and Efficient Routing mechanism which should be dynamic and efficient enough to handle changing topologies. So, there is utmost need for optimization techniques which can lay the foundation of development of suitable routing protocol to attain energy efficiency and routing in sensor networks. Swarm Intelligence is one the most important technique which is highly considered for developing energy efficient routing protocols. Considering Swarm Intelligence, Ant Colony Optimization (ACO) technique is utilized to propose Energy Efficient protocol for WSN. In this paper, a Novel Energy Efficient Routing Protocol based on ACO for WSN is proposed i.e. IEEMARP (Improvised Energy Efficient Multipath Ant Based Routing Protocol). Hardcore testing of protocol proposed i.e. IEEMARP is done in different simulation scenarios using NS-2 simulator on varied parameters like Packet Delivery Ratio, Throughput, Routing Overhead, Energy Consumption and End-To-End Delay and performance is compared with other routing protocols like Basic ACO, DSDV, DSR, ACEAMR, Ant Chain, EMCBR and IACR. The results states that IEEMARP is almost 7 to 10 times better in different parameters. It has also been observed that IEEMARP routing protocol is also efficient in transmitting TCP packets.

Energy efficient routing protocols can potentially reduce the amount of energy consumed in packet forwarding. However, existing literature lacks studies on improving green performance of geocast routings for the Internet of Vehicles. Therefore, this study proposes an energy efficient min delay (EEMD)-based geocast routing protocol to find optimal relay nodes by incorporating energy consumption and packet delivery delay. We introduce energy efficiency in packet forwarding as a more appropriate indicator than energy consumption. We present a green protocol model and analyze its green networking performance in packet forwarding. Extensive simulation shows that our designed EEMD protocol allows efficient energy-saving data forwarding under various vehicular traffic conditions.

The unique characteristics of Underwater Wireless Sensor Networks (UWSNs) attracted the research community to explore different aspects of these networks. Routing is one of the most important and challenging function in UWSNs, for efficient data communication and longevity of sensor node's battery timing. Sensor nodes have energy constraint because replacing the batteries of sensor nodes is an expensive and tough task in harsh aqueous environment. Also interference is a major performance influencing factor. Providing solutions for interference-free communication are also essential. In this paper, we propose three energy-efficient and interference-aware routing protocols named as Inverse Energy Efficient Depth-Based Routing protocol (IEEDBR), Interference-Aware Energy Efficient Depth-Based Routing protocol (IA-EEDBR) and Interference-Aware Inverse Energy Efficient Depth-Based Routing protocol (IA-IEEDBR). Unlike EEDBR, IEEDBR protocol uses depth and minimum residual energy information for selecting data forwarder. While IA-EEDBR takes minimum number of neighbors for forwarder selection. IA-IEEDBR considers depth, minimum residual energy along with minimum number of neighbors for selection of forwarder. Our proposed schemes are validated through simulation and the results demonstrate better performance in terms of improved network lifetime, maximized throughput and reduced path loss.

An energy efficient routing protocol is the major concern in Wireless Sensor Networks (WSNs). In this survey paper, we present energy efficient hierarchical routing protocols, developed from conventional LEACH routing protocol. Main focus of our study is how these extended protocols work in order to increase the life time and how quality routing protocol are improved for WSNs. Furthermore, this paper also highlights some of the issues faced by LEACH and also explains how these issues are tackled by extended versions of LEACH. We compare the features and performance issues of the selected hierarchical routing protocols.

Recent technological advances in communication sector have resulted in the development and improvement of wireless sensor networks consisting of low cost, low power and smaller multi-functional sensor units. Limited battery life of sensor nodes is one of the critical issues in wireless sensor networks. Energy dissipation for data transfer from nodes to base station is the crucial cause of energy depletion. A wide variety of routing protocols were introduced to increase the lifespan of the network and the most efficient scheme is clustering of nodes within the network that works on the principle of divide & conquer and data aggregation. This paper proposes an energy efficient routing protocol EEM-LEACH that discovers a multi-hop path with minimum communication cost from each node to the base station. If the communication cost for direct data transfer is minimum, nodes close to the base station can send data directly to the base station thereby preventing them from dying soon. Only nodes with maximum residual energy and minimum energy consumption can become cluster heads since each node's residual energy as well as average energy consumption is considered for the selection of cluster heads. No global information is needed because cluster formation and multi-hop path selection are distributed. As communication cost per packet is minimized and relay nodes have more residual energy, the network lifetime can be improved.

Designing and development of energy effective path planning algorithm is very key research domain in order to tackle the issues of limited life-time for Wireless Sensor Networks (WSNs). So in WSNs, energy efficiency is major concern of researchers. Overall advancement in routing protocols prove that clustering is much better approach as compared to flat and location-based energy efficient routing protocols. Due to better performance, multiple energy efficient clustering routing protocols have been proposed. But existing clustering algorithms are centralized or distributed, which are not intelligent enough and do not produce hybrid cluster-head selection. In this paper, we propose a cluster structured path planning algorithm named, Hybrid Advance Distributed Centralized Clustering (HADCC) path planning energy efficient algorithm. HADCC proposed model is fascinated with hybrid cluster head selection algorithm. This hybrid algorithm makes decision of cluster head selection of nodes. In order to execute proposed model we have also proposed an advance network topology, in which the whole network region is divided into two physical levels. First physical level consists of a circular region, containing homogeneous normal nodes and all important Base Station. While, second physical level is outer region of the circle that contains advanced heterogeneous nodes. Simulation results indicate that HADCC prolongs the network lifetime as compared to existing advanced clustering routing protocols for both homogeneous and heterogeneous WSNs. HADCC outperforms in case of stability and network life time as compared to the existing clustering algorithms.

<p>Energy efficiency has been considered as the most important issue in wireless sensor networks. As in many applications, wireless sensors are scattered in a wide harsh area, where the battery replacement or charging will be quite difficult and it is the most important challenge. Therefore, the design of energy saving mechanism becomes mandatory in most recent research. In this paper, a new energy efficient clustered routing protocol is proposed: the proposed protocol is based on analyzing the data collected from the sensors in a base-station. Based on this analysis the cluster head will be selected as the one with the most useful data. Then, a variable time slot is specified to each sensor to minimize the transmission of repetitive and un-useful data. The proposed protocol Data-Based Energy Efficient Clustered Routing Protocol for Wireless Sensors Networks (DCRP) was compared with the famous energy efficient LEACH protocol and also with one of the recent energy efficient routing protocols named Position Responsive Routing Protocol (PRRP). DCRP has been used in monitoring the floods in Tabuk area –Saudi Arabia. It shows comparatively better results.</p>

The primary factor influencing the wireless sensor network (WSN) is the energy consumption of the sensor node. One of the key factors influencing WSN energy consumption is the high power consumption and packet delivery ratio needed for WSN processing. The suggested Energy Efficient Spherical Grid Routing (EESGR) protocol reduces the node's energy consumption to meet the requirements. To choose the cluster heads, the WSN is clustered into a collection of nodes using the pillar k-means clustering method defined in the proposed protocol. One optimization algorithm inspired by nature, the ant lion, is used to create cluster heads for assessing energy consumption in WSNs. The behavior concept of the ant lion is utilized for choosing the best nodes for the selection of the cluster head. The multi-tier spherical grid routing proposed in the paper is used to grid the cluster head generated by the ant-lion optimization algorithm to evaluate the total energy consumed for processing the sensor network. The overall performance of this method is evaluated in Network Simulator 2 (NS2). The proposed method improves performance in throughput, end-to-end delay, packet delivery ratio, and energy consumption compared to the existing techniques.

Energy is an important issue in MANET (Mobile Ad hoc Network). Nodes in network are working in presence of limited energy. So, energy efficient routing is needed for reducing energy consumption. Energy efficient routing schemes can greatly reduce energy consumption and extends the lifetime of the networks. Multipath routing protocol (AOMDV) having more than one path, if the first one is break then second provides the proper packet delivery, this causes reduced node energy consumption and the topology of MANETs always changes, due to the high mobility of nodes. This makes it more difficult to find the routes that message packets use when they are routed. The location based routing provides the location information of the destination to route a packet toward. This paper provides comparison and study on reduced energy consumption by using multipath protocol and performance which is evaluated by performance metrics in case of AOMDV and energy based AOMDV. Now here DREAM protocol is used with AOMDV to finding location of mobile nodes but not with energy but here measures their performance with both multipath protocols. I. INTRODUCTION A mobile ad hoc network (MANET) is a dynamic distributed system of mobile formed by means of multi-hop wireless communication without the use of any existing network infrastructure. MANET routing protocols can be classified into two classes. Proactive protocols, they requires the nodes to periodically exchange the table information to update the pre-determine routes between any pair of source destination nodes. Reactive protocols can establish routes only when they require. MANET routing protocols can be classified on the bases of the methods of delivery of data packets from source to destination. Single Path routing protocols learn routes and select a single best route to each destination. These protocols are incapable of load balancing traffic. Multi-path routing protocols learn routes and can select more than one path to a destination. These protocols are better for performing load balancing. This paper provides the comparison between results about Multipath routing in AOMDV (13), AOMDV with location and Energy with AOMDV.

Routing or forwarding information, such as the location of incidents and victims in a disaster, is significantly important for quick and accurate incident response. However, forwarding such information in disaster areas has been a challenging task for the Wireless Sensor Network as existing networks are affected (destroyed or overused) the disaster. Opportunistic information forwarding can play a vital role in such circumstances. Existing opportunistic routing protocols require huge message transmissions for cluster restoration, which is not energy efficient and results in packet loss. Hence, this paper introduces an energy efficient and reliable opportunistic density cluster-based routing protocol that opportunistically transmits data using a density-clustering protocol for emergency and disaster situations. Simulation results show that the proposed protocol outperforms some existing and well-known routing protocols in terms of network energy consumption, throughput and successful data transmissions.

Wireless sensor networks (WSNs) are widely applied in monitoring and communication but remain constrained by limited energy resources. Efficient routing protocols are critical to prolong network lifetime and ensure balanced energy consumption among sensor nodes. Traditional cluster-based routing often fails to achieve optimal energy balance, leading to premature node failures and degraded performance. Intelligent optimization algorithms, including meta heuristics such as particle swarm optimization (PSO) and emperor penguin optimization (EPO), have been applied to improve routing efficiency. These methods enhance convergence and adaptability but typically operate as standalone approaches. Limited attention has been given to integrating multi criteria decision making (MCDM) methods with meta heuristics. Without this integration, assigning precise weights to multiple criteria and balancing energy consumption across nodes remains difficult. This paper proposes a novel uneven cluster-based routing protocol that integrates fuzzy constrained nonlinear programming- variable weight analysis-technique for order preference by similarity to ideal solution (FCNP-VWA-TOPSIS) with an improved EPO. The protocol first assigns accurate weights to seven multi criteria using FCNP VWA and selects cluster heads (CHs) with TOPSIS. It then constructs the routing tree using improved EPO guided by the weighted fitness function. Extensive simulations show that the proposed protocol achieves superior energy balance, extending network lifetime by 158.0%, 119.3%, and 113.7% compared to uneven clustering routing (UCR), unequal clustering fuzzy logic intelligent algorithm (UCFIA), and fuzzy multi-criteria clustering and bio-inspired energy-efficient routing (FMCB ER), respectively. By combining MCDM and meta heuristic optimization, the protocol advances cluster-based routing in WSNs, significantly enhancing energy efficiency and reliability for real world applications.

An energy efficient and QoS aware routing protocol for wireless sensor and actuator networks

Underwater wireless sensor networks (UWSNs) is an emerging technology for exploration of underwater resources. Security plays an important role in the UWSNs environment because the environment of UWSNs is prone to different security attacks. This research proposes SEECR: Secure Energy Efficient and Cooperative Routing protocol for UWSNs. SEECR comprised of energy efficient and strong defense mechanism for combatting attacks in underwater environment. SEECR exploits cooperative routing for enhancing the performance of network. Considering the resource constrained UWSNs environment minimum computation is employed for implementing security so that SEECR remains suitable for underwater environment. In order to evaluate the performance of SEECR, this research compares the performance of SEECR with AMCTD: Adaptive Mobility of Courier Nodes in Threshold-optimized DBR - a well-known routing protocol for UWSNs environment. The performance of SEECR and AMCTD protocols are evaluated using different performance evaluation parameters such as number of alive nodes, transmission loss, throughput, energy tax and end-to-end delay. The results suggest an improved performance of SEECR over AMCTD. SEECR shows an improvement of 9% in terms of number of alive nodes, over 50% reduction in terms of transmission loss, up to 9% increase in throughput, up to 23% reduction in energy tax, and 25% reduction in end-to-end delay. Further, we observe that attack significantly degrades the performance of AMCTD whereas due to the embedded defense mechanism in SEECR the impact of attack is negligible.