FPGA Implementation of Expandable RSA Pubic-Key Cryptographic Coprocessor

In this paper, techniques for fast implementations of Montgomery's modular multiplication algorithm are described. These use non-redundant multi-bit recoding. These are compared regarding the area and computation requirements and compared with conventional implementation.

Modular multiplication is an integral part of RSA cryptosystems and its performance heavily determines the performance of the encryption hardware. This paper provides a hardware implementation of Montgomery's modular multiplication algorithm using iterative architecture. The propsed design is implemented in Verilog HDL and simulated functionally using ModelSim Altera 10.1E. The synthesis is performed using Altera Quartus II 9.1 with target FPGA board Altera DE2-70. The proposed design consumes 17540 logic elements with 15480 LUT and takes 2048 clock cycles to perform multiplication process. Based on trade-off parameter AT2 measure, the proposed design offers the best performance among other designs.

We propose an efficient multi-exponentiation algorithm based on the modified Booth' algorithm and Montgomery's modular multiplication algorithm. The multi-exponentiation algorithm can be used to implement fast modern cryptosystems. Owing to the reduced number of multiplications, this algorithm is about 10% faster than Pekmestzi's algorithms. The proposed algorithm can be implemented in hardware as a small component. The component can then be used to form an efficient modular multi-exponentiation module by combining it with an efficient Montgomery modular multiplication module.

Modular multiplication is a crucial operation in public-key cryptography systems such as RSA and ECC. In this study, we analyze and improve the iteration steps of the classic Montgomery modular multiplication (MMM) algorithm and propose an interleaved pipeline (IP) structure, which meets the high-performance and low-cost requirements for Internet of Things devices. Compared to the classic pipeline structure, the IP does not require a multiplexing processing element (PE), which helps shorten the data path of intermediate results. We further introduce a disruption in the critical path to complete an iterative step of the MMM algorithm in two clock cycles. Our proposed hardware architecture is implemented on Xilinx Virtex-7 Series FPGA, using DSP48E1, to realize the multiplier. The implemented results show that the modular multiplication of 1024 bits by 2048 bits requires 1.03 μs and 2.13 μs, respectively. Moreover, our area–time–product analysis reveals a favorable outcome compared to the state-of-the-art designs across a 1024-bit and 2048-bit modulus.

In public key cryptography such as RSA, modular exponentiation is the most time-consuming operation. RSA’s modular exponentiation can be computed by repeated modular multiplication. Fast modular multiplication algorithms have been proposed to speed up decryption/encryption. Montgomery algorithm, commonly used for modular multiplication is limited by the carry propagation delay from the addition of long operands. In this paper, we propose a hardware structure that simplifies the operation of the Q logic in Montgomery multiplier. The resulting design was applied in modular exponentiation for lightweight applications of RSA. Synthesis results showed that the new multiplier design achieved reduce hardware area, consequently, an area-efficient modular exponentiation design. A frequency of 452.49 MHz was achieved for modular exponentiation with 85 K gates using the 130 nm technology.

Large integer modular multiplication and modular addition/subtraction are basic operations in elliptic curve cryptography (ECC). Traditionally, systolic array was used to implement modular multiplication. It is not efficient because of data dependency between neighbor processing elements (PEs). In this paper, we propose a compact modular multiplication and addition unit (MMAU) specific for ECC by dividing an improved Montgomery modular multiplication (MMM) algorithm into three parts, mapping them correspondingly to a 3-stage pipelined circuit and adding a small amount of hardware to the third stage of the pipeline for implementing modular addition/subtraction without affecting the performance of MMM. The MMAU computes one modular multiplication and one modular addition/subtraction in every 3(n+7) clock cycles for n-bit operands. When the pipeline is fully utilized, the MMAU can generate a result at every n+7 cycles. The experimental results show that our scheme achieves a higher throughput with less resource compared with existed ones.

Improving the computational efficiency of modular operations for embedded systems

The modular multiplication operation is the most time-consuming operation for number-theoretic cryptographic algorithms involving large integers, such as RSA and Diffie-Hellman. Implementations reveal that more than 75 percent of the time is spent in the modular multiplication function within the RSA for more than 1,024-bit moduli. There are fast multiplier architectures to minimize the delay and increase the throughput using parallelism and pipelining. However such designs are large in terms of area and low in efficiency. In this paper, we integrate the fast Fourier transform (FFT) method into the McLaughlin’s framework, and present an improved FFT-based Montgomery modular multiplication (MMM) algorithm achieving high area-time efficiency. Compared to the previous FFT-based designs, we inhibit the zero-padding operation by computing the modular multiplication steps directly using cyclic and nega-cyclic convolutions. Thus, we reduce the convolution length by half. Furthermore, supported by the number-theoretic weighted transform, the FFT algorithm is used to provide fast convolution computation. We also introduce a general method for efficient parameter selection for the proposed algorithm. Architectures with single and double butterfly structures are designed obtaining low area-latency solutions, which we implemented on Xilinx Virtex-6 FPGAs. The results show that our work offers a better area-latency efficiency compared to the state-of-the-art FFT-based MMM architectures from and above 1,024-bit operand sizes. We have obtained area-latency efficiency improvements up to 50.9 percent for 1,024-bit, 41.9 percent for 2,048-bit, 37.8 percent for 4,096-bit and 103.2 percent for 7,680-bit operands. Furthermore, the operating latency is also outperformed with high clock frequency for length-64 transform and above.

Rivest, Shamir, Adleman (RSA) algorithm can be used in cryptography to send confidential messages in secure manner. RSA cryptosystem is based on modular multiplication to factorize the large integers. Montgomery modular multiplication can be used as modular multiplication because it is one of the efficient and fastest modular multiplication. Montgomery algorithm is based on add and shift operation, so Carry save adder (CSA) can be used in order to overcome the carry propagation at each addition. In this Montgomery multiplier, the CSA choses the operands and converts the addition result from carry save format to binary form. Accordingly, the architecture can use less hardware and give short critical path delay to do one modular multiplication. In this paper, the Montgomery modular multiplication uses a modified or configurable Carry save adder (CCSA). The CCSA is designed with one full adder and two half adders to reduce the delay. Still CCSA suffers from high power consumption. In order to reduce the power consumption, the full adder used in CCSA with two multiplexers has been proposed. The proposed Montgomery modular multiplier has the capability to provide 26% average reduction in power when compared with previous designs.

Modular multiplication forms the basis of many cryptographic functions such as RSA, Diffie-Hellman key exchange, and ElGamal encryption. For large RSA moduli, combining the fast Fourier transform (FFT) with McLaughlin's Montgomery modular multiplication (MLM) has been validated to offer cost-effective implementation results. However, the conditional selections in McLaughlin's algorithm are considered to be inefficient and vulnerable to timing attacks, since extra long additions or subtractions may take place and the running time of MLM varies. In this work, we restrict the parameters of MLM by a set of new bounds and present a modified MLM algorithm involving no conditional selection. Compared to the original MLM algorithm, we inhibit extra operations caused by the conditional selections and accomplish constant running time for modular multiplications with different inputs. As a result, we improve both area-time efficiency and security against timing attacks. Based on the proposed algorithm, efficient FFT-based modular multiplication and exponentiation are derived. Exponentiation architectures with dual FFT-based multipliers are designed obtaining area-latency efficient solutions. The results show that our work offers a better efficiency compared to the state-of-the-art works from and above 2048-bit operand sizes. For single FFT-based modular multiplication, we have achieved constant running time and obtained area-latency efficiency improvements up to 24.3 percent for 1,024-bit and 35.5 percent for 4,096-bit operands, respectively.

Montgomery modular multiplication is widely applied to public key cryptosystems like Rivest-Sharmir-Adleman (RSA) and elliptic curve cryptography (ECC). This work presents a word-based Booth encoded radix-4 Montgomery modular multiplication algorithm for low-latency scalable architecture. The data dependency resulting from the inherent right shifting of the intermediate results in the conventional radix-4 Montgomery modular multiplication algorithm is alleviated; thus the latency between the neighboring process elements (PEs) is exactly one cycle. The number of the equivalent operands in the accumulation is not increased with operand reduction scheme. Implementation results based on the same technology show that compared to other Booth encoded radix-4 Montgomery modular multipliers, the proposed design achieves at least 23% time reduction for accomplishing one 1024-bit Montgomery modular multiplication.

In this paper, we present Microblaze-based parallel architectures of Elliptic Curve Scalar Multiplication (ECSM) computation for embedded Elliptic Curve Cryptosystem (ECC) on Xilinx FPGA. The proposed implementations support arbitrary Elliptic Curve (EC) forms defined over large prime field ([Formula: see text]) with different security-level sizes. ECSM is performed using Montgomery Power Ladder (MPL) algorithm in Chudnovsky projective coordinates system. At the low abstraction level, Montgomery Modular Multiplication (MMM) is considered as the critical operation. It is implemented within a hardware Accelerator MMM (AccMMM) core based on the modified high radix, [Formula: see text] MMM algorithm. The efficiency of our parallel implementations is achieved by the combination of the mixed SW/HW approach with Multi Processor System on Programmable Chip (MPSoPC) design. The integration of multi MicroBlaze processor in single architecture allows not only the flexibility of the overall system but also the exploitation of the parallelism in ECSM computation with several degrees. The Virtex-5 parallel implementations of 256-bit and 521-bis ECSM computations run at 100[Formula: see text]MHZ frequency and consume between 2,739 and 6,533 slices, 22 and 72 RAMs and between 16 and 48 DSP48E cores. For the considered security-level sizes, the delays to perform single ECSM are between 115[Formula: see text]ms and 14.72[Formula: see text]ms.

This paper presents a new and improved word-based processor array architecture for unified and scalable radix2 Montgomery modular multiplication algorithm. In this architecture, the multiplicand and the modulus words are allocated to each processing element rather than pipelined between the processing elements as in the previous architecture extracted by Ç. Koç̧, and also the multiplier bits are fed serially to the first processing element of the processor array every odd clock cycle. Moreover, this architecture was modified to reduce the critical path delay and area by replacing the two levels of carry save adder (CSA) logic by modified 4-to-2 CSA that use only one level of dual field adder logic (DFA) taking advantage of processing two operand words by the same processing element (PE) of the processor array. An ASIC Implementation of the proposed architecture shows that it can perform 1024-bit modular multiplication (for word size w = 32) in about 17.07 μs. Also, the results show that it has smaller Area ×Time values compared to all existing designs by ratios ranging from 11.6 % to 47.8 % which makes it suitable for implementations where both area and performance are of concern. Moreover, it has higher throughput (1.8-39.5 %) than most of the published unified and scalable architectures except the architecture extracted by Harris. It has slightly higher throughput (4.5 %) than the proposed one.

Montgomery modular multiplication is widely used in public key cryptosystems. This paper presents an energy-efficient architecture for word-based Montgomery modular multiplication algorithm. Using the proposed architecture mapping scheme in dependency graph, the switching activity of kernel can be greatly reduced. In addition, the proposed design also retains one-cycle latency between neighboring processing elements. Experimental results based on TSMC 90-nm CMOS technology show that compared to the related work, the proposed design achieves about 17% reduction in energy consumption for completing one 1024-bit Montgomery modular multiplication.

Based on modified Booth's algorithm, a radix-4 cellular-array modular multiplier to fulfill the radix-4 modular multiplication algorithm is designed. We implement the modular multiplier in bit level and get rid of the extra control signals shown in by using the concept of guard bits. The radix-4 modular multiplier can be used to implement fast RSA cryptosystem. Due to reduced number of iterations and pipelining, our modular multiplier is four times faster than the cellular-array modular multiplier based on the original Montgomery's algorithm. The time to calculate a modular exponentiation is about n/sup 2/ clock cycles, where n is the word length, and the clock cycle is roughly equal to the delay time of a full adder. The utilization of the multiplier is 100% by interleaving consecutive exponentiations.