LEACH Protocol Enhancement for Increasing WSN Lifetime

Among important issues in the current energy-efficient routing protocols for wireless sensor networks (WSNs) based on clustering approaches are how to determine the optimal number of clusters, how to generate clusters and how select cluster-heads to improve WSNs performance. These approaches aim to reduce energy consumption of the WSN nodes and to extend the network lifetime. This paper reviews and compares the performance of three clustering techniques for determining number of clusters: rule of thumb, elbow, and silhouette. Each of these techniques involves a distributed K-means approach to generate clusters. Moreover, we compare these three clustering methods with low energy adaptive clustering hierarchy (LEACH), Imp LEACH and MODLEACH in terms of network lifetime, energy consumption and the number of packets sent to the base station (BS). The results obtained indicate that rule of thumb method provides better performance compared to other clustering techniques in terms of energy consumption and network lifetime.

Using wireless sensor networks (WSNs) in delay and reliability critical environments is highly desired due to their unique advantages such as low cost, ease of deployment, and redundancy. However, successful deployment of resource-limited WSNs in such applications requires strict quality-of-service (QoS) provisioning techniques to meet the desired latency and reliability targets of those applications. Implementation of QoS techniques in WSNs is significantly challenging since WSNs have been initially devised for low-data-rate non-real-time applications. Therefore, WSN designers and developers resort to different cross-layer interaction and optimization techniques to provision QoS in WSNs. In this paper, we present a survey on the state of the art of cross-layer QoS approaches in wireless terrestrial sensor networks to achieve delay and reliability bounds in critical applications. Our paper provides a unique classification of cross-layer QoS approaches in WSNs that allows surveying a large amount of studies with utmost clarity. Furthermore, we highlight the main challenges of implementing QoS protocols in WSNs and present an overview of QoS-aware WSN applications.

Wireless sensor networks (WSNs) are quickly becoming an essential part of today's modern infrastructure, and it is becoming crucial to consider time synchronisation problems in WSNs. Furthermore, one of the main design issues in WSN time synchronisation is the efficient use of energy at each sensor node to prolong the lifespan of the network. This paper describes a new energy-efficient time protocol based on the spanning tree of the network model graph in a WSN. Three major cases are discussed: 1) time synchronisation using the energy-efficient spanning tree (EST) protocol in a WSN with approximately 300 sensors; 2) an improved EST protocol in large-scale WSNs; 3) an improved EST protocol under weighted graph. Additionally, a series of practical algorithms are proposed in this paper, where both energy and time efficient can be clearly shown through a number of simulated examples along with their comparative results.

The existing routing protocols for wireless sensor networks were not reasonable in design, which limited their application. Most of the existing studies did not take into account the energy consumption of the network and the balanced use of the energy of sensor nodes, which led to the unsatisfactory application effect of wireless sensor networks in some fields. Therefore, from the perspective of energy balance in wireless sensor networks, this paper proposed a construction method of an energy balance routing protocol in wireless sensor networks based on a fuzzy control strategy. Firstly, based on the analysis of the basic composition of wireless sensor networks and the structure of sensor nodes, this paper expounded the basic process of wireless data transmission and summarized the classification and characteristics of routing protocols in wireless sensor networks from different angles. Secondly, according to the node data transmission characteristics of wireless sensor networks, the energy balance use model of sensor nodes was established, and the design method of the energy balance routing protocol based on fuzzy control strategy was proposed, and the data transmission link was optimized. Finally, through experimental comparative analysis, the results showed that the energy balanced routing protocol proposed in this paper can effectively realize the energy balanced use of the network data transmission process. Compared with other common routing protocols, the wireless sensor network routing protocol proposed in this paper can not only improve the data transmission efficiency and reduce the data redundancy but also save energy consumption and prolong the network running time. The design method of routing protocol proposed in this paper will be conducive to the optimization and application of routing protocol in wireless sensor networks and provide a theoretical basis for the related research of wireless sensor networks.

QoSNET: An integrated QoS network for routing protocols in large scale wireless sensor networks

Wireless sensor networks(WSN) are a kind of communication networks with in-dependent sensor nodes which could construct multi-hop ad hoc network to trans-fer data. The transport protocols for Wireless Sensor Network play an important role to promote the performance of the whole systems. This paper proposes a modified transport layer protocol for heterogeneous Wireless Sensor Networks(HWSN). As TCP is not suitable to use in HWSN directly, we design a modified transport protocol(named mTCP) based on TCP by a six-state finite state machine. Experimental results illustrate that our design can improve the communication capability of the transmission layer in heterogeneous wireless sensor networks significantly.

Wireless sensor networks congestion occurs easily due to its centralized traffic pattern. Normally, mono-sync wireless sensor network experiences multiple traffic flow congestion in the dense environment of the network, which leads to excess energy consumption and severe packet loss. To overcome these issues, a congestion detection and alleviation mechanism using cluster based heuristic optimized hierarchical routing protocol is proposed in this paper. Here, congestion detection and alleviation utilize the features of sensor nodes. The congestion is categorized into two types: (i) node level congestion and (ii) link level congestion. The node level congestion is detected by assessing the buffer utilization and the interval amid the consecutive data packets. The link level congestion is considered with computing link usage utilizing back-off step of round robin carrier sense multi-access with collision avoidance. Congestion detection and alleviation reactively affected node/link through cuckoo hosted rider search multi-hop routing algorithm. It has two phases: the cluster head selection and multi-path routing. Cluster head selection is performed through Taylor multiple random forest kernel fuzzy C-means clustering algorithm and multi-path routing is performed through cuckoo hosted rider search multi-hop routing algorithm. The simulation of the proposed method is done in network simulator tool. Here, the performance metrics, like packet delivery ratio, delay, energy consumption, packet drop, overhead, network lifetime and throughput are calculated. The experimental outcomes of the proposed technique shows 11.6%, 18.4% and 28.1% lower delay, 78.2%, 65.4% and 52.6% higher packet delivery ratio, and 29.2%, 37.4% and 40.8% lower packet drop compared with the existing methods, like congestion detection and alleviation using multi-attribute decision-making in optimization-based hybrid congestion alleviation routing protocol in wireless sensor networks, congestion detection and alleviation using hybrid K-means with greedy best first search algorithms in packet rate reduction utilizing adaptive weight firefly algorithm ant colony optimization based routing protocol in wireless sensor networks and congestion detection and alleviation using multi-input time on task optimization algorithm for altered gravitational search algorithm routing protocol in wireless sensor networks.

Wireless sensor networks (WSNs) are composed of many low cost, low power devices with sensing, local processing and wireless communication capabilities. Recent advances in wireless networks have led to many new protocols specifically designed for WSNs where energy awareness is an essential consideration. Most of the attention, however, has been given to the routing protocols since they might differ depending on the application and network architecture. Minimizing energy dissipation and maximizing network lifetime are important issues in the design of routing protocols for WSNs. In this paper, the low-energy adaptive clustering hierarchy (LEACH) routing protocol is considered and improved. We propose a clustering routing protocol named intra-balanced LEACH (IBLEACH), which extends LEACH protocol by balancing the energy consumption in the network. The simulation results show that IBLEACH outperforms LEACH and the existing improvements of LEACH in terms of network lifetime and energy consumption minimization.

In this paper, a clustering-based energy-efficient routing protocol is designed to overcome the hotspot problem in Wireless Sensor networks (WSNs). We have divided the sensor nodes into several clusters, each cluster having a Cluster Head (CH) or a leader node and also implemented a centroid-based mobile sink. The sink moves to a location called “Energy Dependent Centroid Point” where the CHs need minimal energy to transmit data to the sink. We have defined this “Centroid Point” by an equation where the residual energies of CHs are used as a “weight factor” on a normal centroid equation. We have simulated the proposed algorithm and analyzed the results by varying the values of the energy weight factor in the centroid equation up to certain limits (α = 0, 1, 2, and 3). The simulation results are compared with WSN’s existing routing protocols having a mobile sink and a static sink. The comparison results show that our proposed centroid model with α = 0, where the mobile sink moves independent of the residual energies of CHs gives better performances in terms of network lifetime, energy loss, and total data packet transmission.

Wireless sensor networks are a new emerging area where swarm intelligence can be applied with interesting implications. In fact, a strong analogy between unicellular organism colonies and wireless sensor networks can be emphasized: a sensor network can be viewed as a “colony” of simple, scarce resource nodes that, autonomously, are able only to perform simple tasks, but all together can accomplish very complex problems. In this paper we propose a routing protocol for multisink Wireless Sensor Networks with interesting properties: self organization, fault tolerance and environmental adaptation. The proposed protocol was inspired by the well known behavior (in artificial life studies) of “Slime Mold”. Such colony of unicellular organisms organizes itself in clusters by pheromone generation and evaporation mechanisms. In a similar manner our protocol manages the data traffic towards multiple sink nodes using the gradient concept and reaching high levels of autonomy and fault tolerance. We analyze the proposed protocol to examine the performances, the signalling overhead and the adaptation properties to environmental changes or nodes faults using simulation techniques.

In wireless sensor networks, MAC protocol is used to achieve efficient, fair and balanced allocation of wireless channel resources and access control of nodes in the network, and to control the communication process of nodes in the network. The energy consumption of wireless sensor nodes is mainly concentrated in the communication unit, including: data transceiver, idle listening, protocol control overhead, etc. A good MAC protocol is beneficial to reduce unnecessary energy consumption and enhance node life time. At the same time, MAC protocol, as the bottom protocol of wireless sensor network, provides a stable and reliable communication foundation for the realization of the upper protocol. Therefore, a large number of scholars at home and abroad have carried out extensive and in-depth research on MAC layer protocol of network. In this paper, the research process and progress of MAC layer protocol in wireless sensor networks are analyzed, and the research progress of MAC layer protocol in multi-radio frequency and multi-channel wireless sensor networks is analyzed.

Wireless Sensor Networks (WSNs) are designed by hundreds or thousands of tiny, low cost and multifunctional sensor nodes. Each sensor node has very low battery life. Sensor nodes have finite storage capabilities, transmission and processing range and energy resources are also limited. There are many design issues in WSNs such as mobility, energy consumption, network topology, data aggregation, localization, production cost, security, network size and density etc. Routing protocols provide efficient working of the network, increase network lifetime, responsible for maintaining the routes in the network and perform reliable multi-hop communication under various conditions. LEACH (Low Energy Adaptive Clustering Protocol) is one of the hierarchical protocol in WSNs. LEACH uses TDMA MAC Protocol. During random data distribution, a number of TDMA slots are wasted. Because sensor nodes don't know either they have data to send or not, they continuously listen to the medium and this result in idle listening problem. This paper proposed OE-LEACH (An Optimized Energy Efficient LEACH Algorithm for WSNs) to enhance the performance of the LEACH Protocol, reduce time delay and energy consumption. Network Lifetime and throughput of WSN also increases. The Proposed method is simulated in MATLAB 2010a.

Wireless Sensor Networks (WSNs) play a necessary position in todays actual world applications. WSNs are a team of autonomous sensor nodes that are geographically distributed to accumulate information and monitor events. WSNs are similarly sense that they rely on wireless connectivity and spontaneous formation of networks so that sensor information can be transported via wireless. Sometimes called dust network, minute sensors as small as dust referring to smart dust. WSNs are spatially distributed two to screen or bodily temperature, sound, pressure, etc. and to cooperatively ignore their data via the network to different locations. Each such sensor network node has typically various parts. Routing in WSNs in one of the important technique, because all node executes its battery power, if may be one node failure it collapse entire networks. Routing in WSNs is in reality difficult due to the intrinsic characteristics that differentiate these networks from different networks. The plan of routing protocols in WSN is affected via number of exigent factors. In this paper, a review on routing protocols for Wireless Sensor Networks (WSNs) and performance of its execution.

Wireless industrial sensor networks are wireless sensor networks which have been adapted to industrial applications. Most techniques for wireless sensor networks can be applied to wireless industrial sensor networks. However, for industrial applications of wireless industrial sensor networks, new requirements such as real-time, reliable delivery need to be considered. In this paper, we propose EARQ, which is a novel routing protocol for wireless industrial sensor networks. It provides real-time, reliable delivery of a packet, while considering energy awareness. In EARQ, a node estimates the energy cost, delay and reliability of a path to the sink node, based only on information from neighboring nodes. Then, it calculates the probability of selecting a path, using the estimates. When packet forwarding is required, it randomly selects the next node. A path with lower energy cost is likely to be selected, because the probability is inversely proportional to the energy cost to the sink node. To achieve real-time delivery, only paths that may deliver a packet in time are selected. To achieve reliability, it may send a redundant packet via an alternate path, but only if it is a source of a packet. Experimental results show that EARQ is suitable for industrial applications, due to its capability for energy efficient, real-time, reliable communications.

Wireless Sensor Networks (WSNs) and Wireless Multimedia Sensor Networks (WMSNs) consist of wirelessly interconnected sensor nodes which can collect, deliver and process information in different application areas. Power Consumption in these networks is a major problem. Some of the applications include landslide detection, glacial monitoring, wildlife tracking, health care, military applications, environmental monitoring and a large number of applications to robotics, “internet of things” projects. This paper will illustrate the fundamental characteristics of WSN followed by different power consumption protocols. Here we have performed the comparative performance analysis of different power consumption protocols.