Lqaid: Localized Quality Aware Image Denoising Using Deep Convolutional Neural Networks

Self-mixing interferometry (SMI) is superior to other laser interferometry methods due to its simplicity and compactness. However, SMI signals are often complex and difficult to process due to interference in the form of variations in the effective reflectivity of the target, noisy signals, complex signal shapes, and other dependencies. Deep neural networks have been a very popular area of research in computer artificial intelligence in recent years, allowing more implicit features to be uncovered than traditional shallow machine learning. It has been shown that convolutional and back-propagation neural networks can be used for SMI signal processing. There are also studies that have used machine learning genetic algorithms for absolute distance measurement. Based on the above, this study used convolutional neural networks to form a deep neural network for absolute distance measurement based on SMI technology. We first trained the deep convolutional neural network at different feedback strengths. The results of the Convolutional Neural Network (CNN) model showed a coefficient of determination of 0.9987. which is consistent with the required model. The trained network was then used to estimate absolute distances with and without the addition of noise. The comparison proves that the proposed method is noise-proof and has high adaptability for measurements under different conditions.

Understanding the spatial distribution of irrigated croplands is crucial for food security and water use. To map land cover classes with high-spatial-resolution images, it is necessary to analyze the semantic information of target objects in addition to the spectral or spatial–spectral information of local pixels. Deep convolutional neural networks (DCNNs) can characterize the semantic features of objects adaptively. This study uses DCNNs to extract irrigated croplands from Sentinel-2 images in the states of Washington and California in the United States. We integrated the DCNNs of 101 layers, discarded pooling layers, and employed dilation convolution to preserve location information; these are models which were used based on fully convolutional network (FCN) architectures. The findings indicated that irrigated croplands may be effectively detected at various phases of crop growth in the fields. A quantitative analysis of the trained models revealed that the three models in the two states had the lowest values of Intersection over Union (IoU) and Kappa, i.e., 0.88 and 0.91, respectively. The deep models’ temporal portability across different years was acceptable. The lowest values of recall and OA (overall accuracy) from 2018 to 2021 were 0.91 and 0.87, respectively. In Washington, the lowest OA value from 10 to 300 m resolution was 0.76. This study demonstrates the potential of FCNs + DCNNs approaches for mapping irrigated croplands across large regions, providing a solution for irrigation mapping. The spatial resolution portability of deep models could be improved further by designing model architectures.

Evaluation of the benchmark datasets for testing the efficacy of deep convolutional neural networks

Identification of crops is an important topic in the agricultural domain. Hyperspectral remote sensing data are very useful for crop feature extraction and classification. Remote sensing data is an unstructured data and Convolutional Neural Network (CNN) can work on unstructured data efficiently. This paper presents an evaluation of CNN for crop classification using the Indian Pines standard dataset obtained from the AVIRIS sensor and the study area dataset obtained from the EO-1hyperion sensor. Optimized CNN has been tuned by training the model on different parameters. It has been compared with two classification algorithms: Deep Neural Network (DNN) and Convolutional Autoencoder. According to the test results, the proposed optimized CNN model provided better results as compared to the other two methods. CNN has given 97 ± 0.58% overall accuracy for the Indian Pines standard dataset and 78 ± 2.43% for our study area dataset.

Deep Convolutional Neural Networks for Large-scale Speech Tasks

As the aging of concrete structures becomes increasingly severe, crack detection has become a crucial aspect of maintaining their sustainable use. This paper investigates an automatic detection and analysis method for concrete cracks based on deep convolutional neural network architecture. The study utilized drones equipped with high-definition cameras to capture images of concrete structures such as bridges and roads, collecting over 10,000 original images containing cracks. Using Labelme software for point-by-point image annotation and applying data augmentation techniques like rotation and scaling, the dataset was expanded to 30,000 images to meet the requirements of deep learning model training. An improved AlexNet model was developed, replacing the fully connected layer with global average pooling to enhance robustness and reduce overfitting. The model achieved an average accuracy of 95.42% on the test set, outperforming traditional methods by 15%. The model also proved effective in noisy environments. Additionally, a semantic segmentation model based on Fully Convolutional Network (FCN) was introduced, incorporating atrous convolution and spatial pyramid pooling, achieving a pixel-level accuracy of 97.6%, surpassing benchmark models such as FCN and U-Net. The model accurately estimated crack width, with an error rate within ±2% compared to field measurements. This method improves detection efficiency and accuracy while reducing manual intervention, providing strong support for the maintenance of concrete structures.

Optical pressure sensors based plantar image segmenting using an improved fully convolutional network

Deep convolutional neural networks have become a dominant solution for numerous image classification tasks. However, a main criticism is the poor explainability due to the black-box characteristic, which hurdles the extensive usage of deep convolutional neural networks. To address this issue, this paper proposes a new evolutionary multi-objective based method, which aims to explain the behaviours of deep convolutional neural networks by evolving local explanations on specific images. To the best of our knowledge, this is the first evolutionary multi-objective method to evolve local explanations. The proposed method is model-agnostic, i.e. it is applicable to explain any deep convolutional neural networks. ImageNet is used to examine the effectiveness of the proposed method. Three well-known deep convolutional neural networks -VGGNet, ResNet, and MobileNet, are chosen to demonstrate the modelagnostic characteristic. Based on the experimental results, it can be observed that the local explanations are understandable to end-users, who need to check the sensibility of the evolved explanations to decide whether to trust the predictions made by the deep convolutional neural networks. Furthermore, the local explanations evolved by the proposed method improves the confidence of deep convolutional neural networks making the predictions. Lastly, the pareto front and convergence analyses indicate that the proposed method can form a good set of nondominated solutions.

Convolutional neural networks (CNNs) have shown great advantages in computer vision fields, and loss functions are of great significance to their gradient descent algorithms. Softmax loss, a combination of cross-entropy loss and Softmax function, is the most commonly used one for CNNs. Hence, it can continuously increase the discernibility of sample features in classification tasks. Intuitively, to promote the discrimination of CNNs, the learned features are desirable when the inter-class separability and intra-class compactness are maximized simultaneously. Since Softmax loss hardly motivates this inter-class separability and intra-class compactness simultaneously and explicitly, we propose a new method to achieve this simultaneous maximization. This method minimizes the distance between features of homogeneous samples along with Softmax loss and thus improves CNNs' performance on vision-related tasks. Experiments on both visual classification and face verification datasets validate the effectiveness and advantages of our method.

Deep learning models are highly parameterized, resulting in difficulty in inference and transfer learning for image recognition tasks. In this work, we propose a layered pathway evolution method to compress a deep convolutional neural network (DCNN) for classification of masses in digital breast tomosynthesis (DBT). The objective is to prune the number of tunable parameters while preserving the classification accuracy. In the first stage transfer learning, 19 632 augmented regions-of-interest (ROIs) from 2454 mass lesions on mammograms were used to train a pre-trained DCNN on ImageNet. In the second stage transfer learning, the DCNN was used as a feature extractor followed by feature selection and random forest classification. The pathway evolution was performed using genetic algorithm in an iterative approach with tournament selection driven by count-preserving crossover and mutation. The second stage was trained with 9120 DBT ROIs from 228 mass lesions using leave-one-case-out cross-validation. The DCNN was reduced by 87% in the number of neurons, 34% in the number of parameters, and 95% in the number of multiply-and-add operations required in the convolutional layers. The test AUC on 89 mass lesions from 94 independent DBT cases before and after pruning were 0.88 and 0.90, respectively, and the difference was not statistically significant (p > 0.05). The proposed DCNN compression approach can reduce the number of required operations by 95% while maintaining the classification performance. The approach can be extended to other deep neural networks and imaging tasks where transfer learning is appropriate.

paper, we focus on exploring the relationship between weave patterns and their mechanical properties in woven fiber composites through Machine Learning. Specifically, we explore the interactions between woven architectures and in-plane stiffness properties through Deep Convolutional Neural Network (DCNN) and Generative Adversarial Network (GAN). Our research is important for exploring how woven composite’s pattern is related to its mechanical properties and accelerating woven composite design as well as optimization. We focus on two tasks: (1) Stiffness prediction: Predicting in-plane stiffness properties for given weave patterns. Our DCNN extracts high-level features through several convolutional and fully connected layers to determine the final predictions. (2) Weave pattern prediction: Predicting weave patterns for target stiffness properties, which can be treated as the reverse task of the first one. Due to many-to-one mapping between weave patterns and the composite properties, we utilize a Decoder Neural Network as our baseline model and compare its performance with GAN and Genetic Algorithm. We represent the weave patterns as 2D checkerboard models and use finite element analysis (FEA) to determine in-plane stiffness properties, which serve as input data for our ML framework. We show that: (1) for stiffness prediction, DCNN can predict stiffness values for a given weave pattern with relatively high accuracy (above 93%); (2) for weave pattern prediction, the GAN model gives the best prediction accuracy (above 92%) while Decoder Neural Network has the best time efficiency. HAOTIAN FENG

Video hyperlinking represents a classical example of multimodal problems. Common approaches to such problems are early fusion of the initial modalities and crossmodal translation from one modality to the other. Recently, deep neural networks, especially deep autoencoders, have proven promising both for crossmodal translation and for early fusion via multimodal embedding. A particular architecture, bidirectional symmetrical deep neural networks, have been proven to yield improved multimodal embeddings over classical autoencoders, while also being able to perform crossmodal translation. In this work, we focus firstly at evaluating good single-modal continuous representations both for textual and for visual information. Word2Vec and paragraph vectors are evaluated for representing collections of words, such as parts of automatic transcripts and multiple visual concepts, while different deep convolutional neural networks are evaluated for directly embedding visual information, avoiding the creation of visual concepts. Secondly, we evaluate methods for multimodal fusion and crossmodal translation, with different single-modal pairs, in the task of video hyperlinking. Bidirectional (symmetrical) deep neural networks were shown to successfully tackle downsides of multimodal autoencoders and yield a superior multimodal representation. In this work, we extensively tests them in different settings, with different single-modal representations, within the context of video-hyperlinking. Our novel bidirectional symmetrical deep neural networks are compared to classical autoencoders and are shown to yield significantly improved multimodal embeddings that significantly (alpha=0.0001) outperform multimodal embeddings obtained by deep autoencoders with an absolute improvement in precision at 10 of 14.1% when embedding visual concepts and automatic transcripts and an absolute improvement of 4.3% when embedding automatic transcripts with features obtained with very deep convolutional neural networks, yielding 80% of precision at 10.

Text recognition in natural scene images is a challenging problem in computer vision. Different than the optical character recognition (OCR), text recognition in natural scene images is more complex due to variations in text size, colors, fonts, orientations, complex backgrounds, occlusion, illuminations and uneven lighting conditions. In this paper, we propose a segmentation-free method based on a deep convolutional recurrent neural network to solve the problem of cursive text recognition, particularly focusing on Urdu text in natural scenes. Compared to the non-cursive scripts, Urdu text recognition is more complex due to variations in the writing styles, several shapes of the same character, connected text, ligature overlapping, stretched, diagonal and condensed text. The proposed model gets a whole word image as an input without pre-segmenting into individual characters, and then transforms into the sequence of the relevant features. Our model is based on three components: a deep convolutional neural network (CNN) with shortcut connections to extract and encode the features, a recurrent neural network (RNN) to decode the convolutional features, and a connectionist temporal classification (CTC) to map the predicted sequences into the target labels. To increase the text recognition accuracy further, we explore deeper CNN architectures like VGG-16, VGG-19, ResNet-18 and ResNet-34 to extract more appropriate Urdu text features, and compare the recognition results. To conduct the experiments, a new large-scale benchmark dataset of cropped Urdu word images in natural scenes is developed. The experimental results show that the proposed deep CRNN network with shortcut connections outperform than other network architectures. The dataset is publicly available and can be downloaded from <uri xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">https://data.mendeley.com/datasets/k5fz57zd9z/1</uri> .

In the indoor environment, the activity of the pedes-trian can reflect some semantic information, for example, if a user’s activity is recognized as taking elevator, the location of the user is inferred to be in the elevator. These activities can be used as the landmarks for indoor localization. The development of sensor technology enhances the smartphone’s sensing and computational capabilities. Using the smartphones, the activity of the pedestrian can be recognized. Current methods rely on extracting complex hand-crafted features, thus leading to the incapability of real time pedestrian activities identification. In this paper, we propose a real time pedestrian activities recognition method based on deep convolutional neural network. A new deep convolutional neural (CNN) network has been designed to learn the proper features automatically. Experiments show that the proposed method achieves approximately 95.21% accuracy in about 2 seconds in identifying nine types of activities, including still, walk, upstairs, up elevator, up escalator, down elevator, down escalator, downstairs and turning. Besides, we transplant the activity recognition algorithm to smartphones using tensorflow. Moreover, we have built a pedestrian activity database, which contains more than 6 GB data of accelerometer, magnetometer, gyroscope and barometer collected with various types of smartphones. We will make it public to contribute the academic research.

Maxout neurons for deep convolutional and LSTM neural networks in speech recognition