Machine Learning Methods of Remote Sensing Data Processing for Mapping Salt Pan Crust Dynamics in Sebkha de Ndrhamcha, Mauritania

Recently, there has been a remarkable growth in Artificial Intelligence (AI) with the development of efficient AI models and high-power computational resources for processing complex datasets. There has been a growing number of applications of machine learning in satellite remote sensing image data processing. In this work, machine learning methods were applied for crop classification of temporal multi- spectral satellite image to achieve better prediction of crop-wise area statistics. In India, agriculture has a huge impact on the national economy and most of the critical decisions are dependent on agricultural statistics. Sentinel-2 satellite image data for the Guntur district region of Andhra Pradesh, India has been used as the study area. The main reason for selecting this region is the diversity of agricultural crops and the availability of ground truth. As a baseline, the performance of machine learning models like Support Vector Machine (SVM), Random Forest (RF), Decision Tree (DT), and K-Nearest Neighbor (KNN) on crop classification was evaluated on 2016 single time multi-spectral satellite image. SVM performed well with an F1 score of 0.94. Further, the performance of SVM, RF, 1D and 2D Convolutional Neural Network (CNN), Recurrent Neural Network (RNN) with Long Short-Term Memory (LSTM) and RNN with Gated Recurrent Unit (GRU) on 2018 Kharif season temporal multi-spectral satellite image has been evaluated for estimation of crop areas. The results show that SVM has the best F1 score of 0.99 and achieved a 95.9% agreement with the ground surveyed crop areas.

Comparative study of different machine learning models in landslide susceptibility assessment: A case study of Conghua District, Guangzhou, China

The Geographic Resource Analysis Support System (GRASS), a geographic information system, has been fielded at approximately 50 US Army training installations as a land-management decision-making tool. Use of the GRASS geographic information system involves the production of numerous digital maps of environmental parameters, such as elevation, soils, hydrography, etc. A recently emerging technology called computer videographics can be used to graphically enhance GRASS images, thereby creating new ways to visualize GRASS analysis results. The project described in this report explored the enhancement of GRASS images through the use of videographic technology. General image quality of videographically enhanced GRASS images was improved through the use of high-resolution imagery and improved software. Several new types of geographic data visualizations were developed, including three-dimensional shaded-relief maps of GRASS data, overlay of GRASS images with satellite images, and integration of computer-aided-design imagery with GRASS images. GRASS images were successfully enhanced using Macintosh hardware and software, rather than the DOS-based equipment used previously. Images scanned with a document scanner were incorporated into GRASS imagery, and enhanced images were output in an S-VHS high-resolution video format.

Aggregate stability is a useful soil physical dynamic index of soil resistivity to surface wind and water erosion in all ecosystems, especially, in arid and semi-arid regions. Two machine learning techniques including support vector machines (SVMs) and artificial neural networks (ANNs) were used to develop predictive models for the estimation of geometric mean diameter (GMD) of soil aggregates. An empirical multiple linear regression (MLR) model was also constructed as the benchmark to compare their performances. Furthermore, the influence of feature space dimension reduction using parallel genetic algorithm (PGA) on the prediction accuracy of all investigated techniques was evaluated. The ANN model achieved greater accuracy in GMD prediction as compared to the MLR and SVM models. The obtained ERROR% value in GMD prediction using the ANN model was 6.9%, while it was 15.7 and 10.6% for the MLR and SVM models, respectively. Feature selection using PGA improved the prediction accuracy of all investigated techniques. The coefficient of determination (R2) values between the measured and the predicted GMD values using PGA-based MLR, SVM, and ANN models increased by 20.0, 12.2, and 8.8% in comparison with the proposed MLR, SVM, and ANN models. In conclusion, it appears that the PGA-based ANN model could be considered as an alternative to conventional regression models for the GMD prediction.

As a key parameter of land surface energy balance models, near surface air temperature (NSAT) is an important indicator of the surface atmospheric environment and the urban thermal environment. At present, NSAT data are mainly captured by meteorological ground stations. In areas with a sparse distribution of meteorological stations, however, it is not possible to describe the heterogeneity of NSAT in continuous space. With the rapid development of satellite remote sensing technologies, there is now a significant method to retrieve NSAT from multispectral satellite images based on machine learning methods. In the literatures published so far, there is little reported research concerning the comprehensive evaluation and/or the systematic comparison of NSAT retrieval performances based on different machine learning models. Hence, the three most commonly-used machine learning models, Support Vector Regression (SVR), Multilayer Perceptron Neural Network (MLBPN), and Random Forest (RF), have been employed for the NSAT retrieval from various multispectral satellite images of MODIS daytime and nighttime data, Landsat 8 data, and Sentinel-2 data. Comparison of the NSAT retrieval results generated by the different machine learning models from the different types of satellite images reveals that (a) the RF-based model has a better NSAT retrieval performance than the SVR- or MLBPN-based models with respect to both the accuracy and stability, and (b) the NSAT results retrieved from the MODIS data were generally better than those from the Landsat 8 and Sentinel-2 data. To sum up, the conducted research in this article does not only provide a reference for practical applications relevant to NSAT retrievals, but also proposes an efficient RF-based model for NSAT retrieval from multispectral satellite images in continuous space.

Artificial intelligence has been applied in wildfire science and management since the 1990s, with early applications including neural networks and expert systems. Since then, the field has rapidly progressed congruently with the wide adoption of machine learning (ML) methods in the environmental sciences. Here, we present a scoping review of ML applications in wildfire science and management. Our overall objective is to improve awareness of ML methods among wildfire researchers and managers, as well as illustrate the diverse and challenging range of problems in wildfire science available to ML data scientists. To that end, we first present an overview of popular ML approaches used in wildfire science to date and then review the use of ML in wildfire science as broadly categorized into six problem domains, including (i) fuels characterization, fire detection, and mapping; (ii) fire weather and climate change; (iii) fire occurrence, susceptibility, and risk; (iv) fire behavior prediction; (v) fire effects; and (vi) fire management. Furthermore, we discuss the advantages and limitations of various ML approaches relating to data size, computational requirements, generalizability, and interpretability, as well as identify opportunities for future advances in the science and management of wildfires within a data science context. In total, to the end of 2019, we identified 300 relevant publications in which the most frequently used ML methods across problem domains included random forests, MaxEnt, artificial neural networks, decision trees, support vector machines, and genetic algorithms. As such, there exists opportunities to apply more current ML methods — including deep learning and agent-based learning — in the wildfire sciences, especially in instances involving very large multivariate datasets. We must recognize, however, that despite the ability of ML models to learn on their own, expertise in wildfire science is necessary to ensure realistic modelling of fire processes across multiple scales, while the complexity of some ML methods such as deep learning requires a dedicated and sophisticated knowledge of their application. Finally, we stress that the wildfire research and management communities play an active role in providing relevant, high-quality, and freely available wildfire data for use by practitioners of ML methods.

Background and aimsThe birth weight of a newborn is a crucial factor that affects their overall health and future well-being. Low birth weight (LBW) is a widespread global issue, which the World Health Organization defines as weighing less than 2,500 g. LBW can have severe negative consequences on an individual’s health, including neonatal mortality and various health concerns throughout their life. To address this problem, this study has been conducted using BDHS 2017–2018 data to uncover important aspects of LBW using a variety of machine learning (ML) approaches and to determine the best feature selection technique and best predictive ML model.MethodsTo pick out the key features, the Boruta algorithm and wrapper method were used. Logistic Regression (LR) used as traditional method and several machine learning classifiers were then used, including, DT (Decision Tree), SVM (Support Vector Machine), NB (Naïve Bayes), RF (Random Forest), XGBoost (eXtreme Gradient Boosting), and AdaBoost (Adaptive Boosting), to determine the best model for predicting LBW. The model’s performance was evaluated based on the specificity, sensitivity, accuracy, F1 score and AUC value.ResultsResult shows, Boruta algorithm identifies eleven significant features including respondent’s age, highest education level, educational attainment, wealth index, age at first birth, weight, height, BMI, age at first sexual intercourse, birth order number, and whether the child is a twin. Incorporating Boruta algorithm’s significant features, the performance of traditional LR and ML methods including DT, SVM, NB, RF, XGBoost, and AB were evaluated where LR, had a specificity, sensitivity, accuracy and F1 score of 0.85, 0.5, 85.15% and 0.915. While the ML methods DT, SVM, NB, RF, XGBoost, and AB model’s respective accuracy values were 85.35%, 85.15%, 84.54%, 81.18%, and 84.41%. Based on the specificity, sensitivity, accuracy, F1 score and AUC, RF (specificity = 0.99, sensitivity = 0.58, accuracy = 85.86%, F1 score = 0.9243, AUC = 0.549) outperformed the other methods. Both the classical (LR) and machine learning (ML) models’ performance has improved dramatically when important characteristics are extracted using the wrapper method. The LR method identified five significant features with a specificity, sensitivity, accuracy and F1 score of 0.87, 0.33, 87.12% and 0.9309. The region, whether the infant is a twin, and cesarean delivery were the three key features discovered by the DT and RF models, which were implemented using the wrapper technique. All three models had the identical F1 score of 0.9318. However, “child is twin” was recognized as a significant feature by the SVM, NB, and AB models, with an F1 score of 0.9315. Ultimately, with an F1 score of 0.9315, the XGBoost model recognized “child is twin” and “age at first sex” as relevant features. Random Forest again beat the other approaches in this instance.ConclusionsThe study reveals Wrapper method as the optimal feature selection technique. The ML method outperforms traditional methods, with Random Forest (RF) being the most effective predictive model for Low-Birth-Weight prediction. The study suggests that policymakers in Bangladesh can mitigate low birth weight newborns by considering identified risk factors.

The first step of a risk assessment analysis is the evaluation of flood-prone areas. Its importance is considered for both managing and planning emergency activities, such as hydraulic risk reduction management, and also town planning. Nowadays, using Geographic Information System (GIS) technology for risk assessment analysis is very common. However, it is not widely used for defining inundated areas. LiDAR data, such as digital elevation models (DEM), makes GIS numerical models attractive methods for obtaining a flooded area automatically. Using GIS tools is beneficial for effective processing and accuracy assessment in comparison to traditional methods which are based on topographic maps and field surveys. A first approach (Federici & Sguerso, Bollettino SIFET 4:25–42, 2007; Marzocchi, 2009) uses a GIS module in order to simulate perifluvial flood maps, having as prerequisites (i) the conformation of the river floodplain by a high-resolution DEM and (ii) a water surface profile along the river axis calculated for a given water discharge through a generic one-dimensional (1D) hydraulic model (HEC-RAS, Basement, MIKE 11, etc.). On the other hand, a second approach uses a GIS-embedded two-dimensional (2D) model in order to simulate flooded areas due to a dam break (Cannata & Marzocchi, Nat Hazards 61(3):1143–1159, 2012). This module solves the conservative form of the 2D shallow water equations (SWE) using a finite volume method (FVM). The intercell flux is computed by a one-side upwind conservative scheme extended to a 2D problem (Ying et al., J hydraul eng-ASCE 10:977–98, 2004). The newly developed GIS module gives as output maximum intensity maps which can be directly used in a risk assessment process. Both models have been implemented in geographic resources analysis support system (GRASS)-GIS software (Neteler et al., Environ Model Softw 31:124–130, 2012; GRASS, 2013) and two new commands (r.inund.fluv and r.damflood) have been created. Both are available on the official GRASS addons website and are distributed under the terms of the GNU General Public License (GPL). In this work we present a comparison between the two models mentioned above. We analyse the possibility of integrating these two approaches. We intend to use the 1D model, GIS embedded if possible, to calculate the water surface profile along the river axis and the 2D numerical one to analyse inundation beside the river levees.

Parameter importance assessment improves efficacy of machine learning methods for predicting snow avalanche sites in Leh-Manali Highway, India

Contemporary oncology has seen a growing interest in digital technologies, whose integration with extensive healthcare and clinical data has raised new aspirations in managing patient profiles and organizing treatment plans. Among the commonly used digital technologies are Machine Learning (ML) methods that can perform many tasks, such as prediction, classification, and description, based on previously stored big data with high precision and speed. This study aims to develop a predictive ML model for early prediction of breast cancer based on a set of medically categorized risk factors. The locally collected database contained 415 instances from Al-Sadr Teaching Hospital in Basrah, Iraq, 219 (53%) of which were breast cancer patients, whereas 196 (47%) of them were control, respectively non-patients. It trained seven machine learning methods, namely Decision Tree (DT), Random Forest (RF), Support Vector Machines (SVM), K-Nearest Neighbors (KNN), Logical Regression (LR), Multinominal Naïve Bayes (NB), and Gaussian NB. The dataset was cleaned and balanced before being used. The results proved the superiority of the Decision Tree model with 96% accuracy, 96% sensitivity, and 96% specificity, the Random Forest model with 94% accuracy, 100% sensitivity, and 87% specificity, and SVM model with 92% accuracy, 96% sensitivity, and 87% specificity, respectively. Other models gave diverging results. The current study concluded that modern technologies should be employed to raise awareness and control diseases. The need to adopt Electronic Health Records (EHR) to ensure the integration of clinical data of different types recorded over time for patients contributes to building accurate and reliable prediction models.

Predicting asphaltene onset pressure (AOP) and bubble point pressure (Pb) is essential for optimization of gas injection for enhanced oil recovery. Pressure-Volume-Temperature or PVT studies along with equations of state (EoSs) are widely used to predict AOP and Pb. However, PVT experiments are costly and time-consuming. The perturbed-chain statistical associating fluid theory or PC-SAFT is a sophisticated EoS used for prediction of the AOP and Pb. However, this method is computationally complex and has high data requirements. Hence, developing precise and reliable smart models for prediction of the AOP and Pb is inevitable. In this paper, we used machine learning (ML) methods to develop predictive tools for the estimation of the AOP and Pb using experimental data (AOP data set: 170 samples; Pb data set: 146 samples). Extra trees (ET), support vector machine (SVM), decision tree, and k-nearest neighbors ML methods were used. Reservoir temperature, reservoir pressure, SARA fraction, API gravity, gas–oil ratio, fluid molecular weight, monophasic composition, and composition of gas injection are considered as input data. The ET (R2: 0.793, RMSE: 7.5) and the SVM models (R2: 0.988, RMSE: 0.76) attained more reliable results for estimation of the AOP and Pb, respectively. Generally, the accuracy of the PC-SAFT model is higher than that of the AI/ML models. However, our results confirm that the AI/ML approach is an acceptable alternative for the PC-SAFT model when we face lack of data and/or complex mathematical equations. The developed smart models are accurate and fast and produce reliable results with lower data requirements.

Major League Baseball (MLB) is the highest level of professional baseball in the world and accounts for some of the most popular international sporting events. Many scholars have conducted research on predicting the outcome of MLB matches. The accuracy in predicting the results of baseball games is low. Therefore, deep learning and machine learning methods were used to build models for predicting the outcomes (win/loss) of MLB matches and investigate the differences between the models in terms of their performance. The match data of 30 teams during the 2019 MLB season with only the starting pitcher or with all pitchers in the pitcher category were collected to compare the prediction accuracy. A one-dimensional convolutional neural network (1DCNN), a traditional machine learning artificial neural network (ANN), and a support vector machine (SVM) were used to predict match outcomes with fivefold cross-validation to evaluate model performance. The highest prediction accuracies were 93.4%, 93.91%, and 93.90% with the 1DCNN, ANN, SVM models, respectively, before feature selection; after feature selection, the highest accuracies obtained were 94.18% and 94.16% with the ANN and SVM models, respectively. The prediction results obtained with the three models were similar, and the prediction accuracies were much higher than those obtained in related studies. Moreover, a 1DCNN was used for the first time for predicting the outcome of MLB matches, and it achieved a prediction accuracy similar to that achieved by machine learning methods.

Integrated phenology and climate in rice yields prediction using machine learning methods

Image segmentation of brain low-grade glioma (LGG) magnetic resonance imaging (MRI) contributes tremendously to diagnosis, classification and treatment of the disease. A tangible, accurate, reliable and fast image segmentation technique is demanded in clinical diagnosis and research. The emerging machine learning technique has been demonstrated its unique capability in the field of medical image processing, including medical image segmentation. Support vector machine (SVM) and convolutional neural network (CNN) are two widely used machine learning methods. In this work, image segmentation tools based on SVM and CNN are developed and evaluated for brain LGG MR image segmentation studies. The segmentation performance in terms of accuracy and cost is quantitatively analyzed and compared between the SVM and CNN techniques developed. Computed on the Google CoLab, each of the 109 SVM models represents an individual patient, is trained using a single image of that patient and takes a few seconds to complete. The CNN model is trained on a drastically larger dataset of 19,760 data augmented images and takes approximately 2 hours to obtain the most optimal result. The SVM models achieved an average and median accuracy of 0.937 and 0.976 respectively, precision of 0.456 and 0.535 respectively, recall of 0.878 and 0.906 respectively, and F1 score of 0.546 and 0.662 respectively. Although the CNN model required a significantly longer calculation time, it surpassed the SVM models in performance in LGG MR image segmentation, achieving an accuracy of 0.998, a precision of 0.999, a recall of 0.999 and an F1 score of 0.999. This study shows that SVM with appropriate filtering techniques is capable of obtaining reliable and fast segmentation of brain LGG MR images with sufficient accuracy and limited image data. CNN technique outperforms SVM in the accuracy of segmentation with requirements of significantly enlarged data set, long computation time and high-performance computer.

Air pollution in Macau has become a serious problem following the Pearl River Delta’s (PRD) rapid industrialization that began in the 1990s. With this in mind, Macau needs an air quality forecast system that accurately predicts pollutant concentration during the occurrence of pollution episodes to warn the public ahead of time. Five different state-of-the-art machine learning (ML) algorithms were applied to create predictive models to forecast PM2.5, PM10, and CO concentrations for the next 24 and 48 h, which included artificial neural networks (ANN), random forest (RF), extreme gradient boosting (XGBoost), support vector machine (SVM), and multiple linear regression (MLR), to determine the best ML algorithms for the respective pollutants and time scale. The diurnal measurements of air quality data in Macau from 2016 to 2021 were obtained for this work. The 2020 and 2021 datasets were used for model testing, while the four-year data before 2020 and 2021 were used to build and train the ML models. Results show that the ANN, RF, XGBoost, SVM, and MLR models were able to provide good performance in building up a 24-h forecast with a higher coefficient of determination (R2) and lower root mean square error (RMSE), mean absolute error (MAE), and biases (BIAS). Meanwhile, all the ML models in the 48-h forecasting performance were satisfactory enough to be accepted as a two-day continuous forecast even if the R2 value was lower than the 24-h forecast. The 48-h forecasting model could be further improved by proper feature selection based on the 24-h dataset, using the Shapley Additive Explanations (SHAP) value test and the adjusted R2 value of the 48-h forecasting model. In conclusion, the above five ML algorithms were able to successfully forecast the 24 and 48 h of pollutant concentration in Macau, with the RF and SVM models performing the best in the prediction of PM2.5 and PM10, and CO in both 24 and 48-h forecasts.