Nature-Inspired Routing Algorithm for Wireless Sensor Networks

Energy balance is an important performance index in the design of routing algorithm for wireless sensor networks. A swarm intelligence optimization based routing algorithm for wireless sensor networks is proposed, whose kernel idea is taking less hop numbers into consideration and choosing the nodes with less pheromone as next hop to avoid some nodespsila prematurely exhausting their energy because of too concentrated routes through the nodes. The experiments show that the algorithm proposed in this paper is better than the directed diffusion routing protocol both in end-to-end delay and global energy balance and can effectively balance the global energy consumption and prolong the network lifetime.


 
 
 Cluditem is a routing algorithm for wireless sensor networks developed for applications of environmental monitoring with periodic measurement of variables. These applications tolerate a maximum phase shift of the clocks of nodes in the order of milliseconds. This paper proposes two centralized synchronization schemes that introduce a limited processing load. The objective of the work was to assess the impact on the energy consumption of the incorporation of synchronization techniques described. Simulations of the full communication protocol were conducted in the NS2 environment and a comparative study of results was performed. This study showed that the first proposed schema is more convenient with respect to energy consumption, when the area to monitor has reduced dimensions. On the other hand, the second scheme, although it permits to work in larger areas, introduces a decrease in the network lifetime in the order of 14%.
 
 

Recent years have witnessed a proliferation of routing algorithms for Wireless Sensor Networks (WSNs), hence complicating the choice of the proper algorithm to be used for a given application. Simulation frameworks represent a viable solution to anticipate crucial choices, however existing solutions do not encompass the impact of changes (e.g., route updates, node crashes) on the nodes behavior and vice-versa. This article proposes a novel adaptive modeling approach to master the complexity of the thorough simulation of routing algorithms for WSN. Experimental results are provided showing the effectiveness of the proposed approach at managing changes, and dealing with detailed aspects, during the simulation and comparison of several routing algorithms.

Wireless sensor networks area collection of a large number of unattended sensor nodes. The sensor nodes are dynamically deployed in the region. In wireless sensor networks, the unlicensed sensor nodes use their temporarily available vacant licensed channels or spectrum band in a telecommunication network. The many open challenges with issues such as adaptive in self-organisation, fault-tolerance and network scalability with cooperative spectrum sensing and sharing are identifying new challenges in wireless sensor networks. In this paper, we proposed the bio-inspired adaptive routing algorithm for cognitive radio wireless sensor networks. The utilisation of the foraging approach of ANTs and BEEs for making the decision of using the available spectrum sensing and sharing of channels over multi-hops communication, provides the method to utilise idle channel and decrease the delay for communication in wireless sensor network. In this paper, we design the algorithm to solve the issue of wireless sensor network and performance of classical routing protocol LEACH and cognitive radio sensor networks (CRSN) evaluates the parameters which proof the self-organisation routing algorithm.

Recently, network localization systems that are based on inter-node ranges have received significant attention. Geographic routing has been considered an application which can utilize the location information from these localization systems. In this paper, we firstly recognize that sensor network localization algorithms generate positioning data with different error patterns compared to those networks where node positions are determined directly from GNSS measurements. Secondly, by simulating practical sensor network scenarios using data from our localization algorithm, we observe that existing geographic routing algorithms in wireless sensor networks (WSNs) adopt very simplistic methods in the treatment of position error, without due consideration of error distribution. Additionally, an insight is given into localization algorithms for WSNs with inhomogeneous error environments. Our observations represent an initial step toward a detailed understanding and design of efficient geographic routing algorithms in location aware WSNs.

Popularity of Mobile Wireless Sensor Network (MWSN) has increased tremendously due to the ability to connect the physical world with the virtual world. In MWSN, Sensor nodes move freely in a target area without the need of any special infrastructure. MWSN has attracted many researchers as it has introduced unique challenges in aspects like resource management, coverage, routing protocols, security in many applications such as target tracking in military applications, detection of catastrophic events, environment monitoring, health applications etc. Due to mobility, routing process in MWSN has become more complicated as connections in the network can change dynamically. This paper proposes a Mobility-Aware Multi-Objective Hybrid Routing Algorithm (MMOHRA) for Wireless Sensor Network (WSN). MMOHRA selects the best route and forwards the data packets from source to sink using multiple metrics such as Average Energy consumption, Control Overhead, Reaction Time, LQI, and HOP Count. Performance of MMOHRA is compared with Simple Hybrid Routing Protocol (SHRP) and Dynamic Multi-objective Routing Algorithm (DyMORA) using metrics such as Average Energy Consumption, Packet Delivery Ratio, and Jitter. MMOHRA improves the Average Energy Consumption (AEC) by a factor of 14.1% as compared with SHRP and 8.13 % as compared to DyMORA. MMOHRA outperformed SHRP and DyMORA in terms of packet Delivery Ratio (PDR) by 10.17 % and 9.83 % respectively.

Automatic localization is one of the major issues in Wireless Sensor Networks (WSN). DV-hop algorithm is a well-known localization algorithm in WSN but with limited localization accuracy. In this paper, an improved DV-hop localization algorithm in hybrid optical wireless sensor networks is proposed based on the optimization of the parameters in WSN. Various factors that affect the localization accuracy of the DV-hop algorithm in WSN are investigated, including the communication radius of the node, the number of beacon nodes and the number of the total nodes. As the DV-hop algorithm is applied into hybrid optical sensor and WSNs (O-WSN) with rectangular topology, different parameters have to be optimized accordingly. Simulation results show that the square topology outperforms the rectangle topology more than 45 % under the same network parameters using the improved DV-hop algorithm. Therefore another improved DV-hop called Sub-Square Weighted DV-hop (SSW DV-hop) is proposed for the rectangle topology. Both simulation and experiment results demonstrate that applying the SSW DV-hop algorithmin O-WSNs could significantly improve the localization accuracy.

The main goal of research concerning energy aware routing algorithm for wireless sensor network is to increase the lifetime and long-term connectivity of the wireless sensor networks. However, most of energy aware routing algorithms do not take into account the clustering mechanism efficiently. In this paper, we present an efficient energy aware routing algorithm for the wireless sensor networks. In our algorithm, the data aggregation technique and adaptive clustering mechanism are considered for reducing and compacting the cumulative size of packets on the wireless sensor networks. Simulation results show that the energy usage of EAR-ACM is significantly reduced compared with the previous clustering based routing algorithm for the sensor networks.KeywordsSensor NetworkSensor NodeWireless Sensor NetworkCluster HeadData PacketThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Wireless Sensor Networks (WSNs) are usually comprised of a large number of sensor nodes which have limited power resources and require energy efficient routing algorithms. We have presented an Adaptive Transmission Power - Geographical and Energy Aware Routing (ATP-GEAR) algorithm in this paper, which routes the packet towards the destination by calculating the cost of the neighbors of a node in terms of their location and current battery level and transmitting the packet to the lowest costing node with the minimum required transmission power. We analyze the performance of our algorithm based on total power consumption and end-to-end delay from source to destination. Simulation results show that ATP-GEAR yields almost 25% less power consumption and 17% less end-to-end delay when compared with traditional Cluster Based Routing (CBR).

Energy efficiency is critical in wireless sensor networks (WSN) for system reliability and deployment cost. The power consumption of the communication in multi-hop WSN is primarily decided by three factors: routing distance, signal interference, and computation cost of routing. Several routing algorithms designed for energy efficiency or interference avoidance had been proposed. However, they are either too complex to be useful in practices or specialized for certain WSN architectures. In this paper, we propose two energy efficient geographic routing algorithms (EEGRA) for wireless sensor networks, which are based on existing geographic routing algorithms and take all three factors into account. The first algorithm combines the interference into the routing cost function, and uses it in the routing decision. The second algorithm transforms the problem into a constrained optimization problem, and solves it by searching the optimal discretized interference level. We integrate four geographic routing algorithms: GOAFR+, Face Routing, GPSR, and RandHT, to both EEGRA algorithms and compare them with three other routing methods in terms of power consumption and computation cost for the grid and irregular sensor topologies. The results of our experiments show both algorithms conserve sensor's routing energy 30% ~ 50% comparing to general geographic routing algorithms. In addition, the time complexity of EEGRA algorithms is similar to the geographic greedy routing methods, which is much faster than the optimal SINR-based algorithm.

Routing is critical for WSNs due to the nature of multi-hop message delivery and the restricted power supply and computation capacity. Routing mechanisms with efficient power utilization and low computation complexity are of fundamental importance to meet the future application demand of WSNs. In this paper, a novel location-based routing technique, the Artificial Potential Field based Routing (APFR), is proposed. APFR establishes an Artificial Potential Field (APF) for the tagged sensor node and then uses a greedy selection algorithm to determine the next hop based on the direction obtained from the APF. In addition, a backup scheme is presented to recover the route in the case of routing voids. The advantages of APFR are three-fold. First, the routing tends to point to the areas with high node density, so the transmission load is balanced among the sensor nodes. Second, when some nodes are running out of energy, the APF will be updated and the routing will change automatically according to the new APF. Third, APFR only requires local geographic information and is of low computational complexity. The simulation results show that APFR can prolong the network lifetime and improve the routing success rate compared to other routing protocols such as GEAR and GPSR, especially for densely deployed networks.

Utilization of energy and the lifetime increment are the big issues in designing of routing algorithms for wireless sensor networks (WSNs). Many routing algorithms have been developed by various researchers to achieve energy efficiency and to improve the lifetime of the network. But, the way to route the information from the sensor node (SN) to the base station (BS) and vice versa is an important issue, because of resource constraints. In this paper, we have proposed a low energy consumed, cluster-based routing protocol named an energy-efficient and double cluster-head routing (EEDCR) protocol, to increase the network lifetime and minimize the end-to-end delay. Selection of the cluster head (CH) is depending on random selection method, energy method, the total number of nodes, and its energy level. The performances of developed protocol were assessed using simulations and found that it provides successful outcomes in terms of energy-efficient and lifetime increment in routing for WSNs.

A Wireless Sensor Network (WSN) is an emerging technology for a wide range of potential applications, including the environmental monitoring, medical, and target tracking systems. A WSN comprises a set of sensor nodes deployed in an area of interest. Sensor nodes are normally located in a dense and ad hoc manner, communicating each other in a multi-hop fashion in order to collect, process, and relay data. Most of WSNs are built on wireless, battery-powered sensor nodes. In such networks, it is hard to recharge or replace the energy-depleted nodes due to the desolate or harsh environment of the target area. Therefore, the efficient use of limited energy is a primary concern in designing protocols and usage strategies for WSNs. In this work an emergency scenario is considered and a WSN is used to monitoring the emergency area. To limit the power consumption, the WSN is activated only when the emergency occurs. Moreover an integrated protocol for routing and localization is developed to reduce communication, which is the most power-consuming operation in WSNs.

For the purpose of saving the resources of wireless sensor networks, it is necessary to fuse the existing data in wireless sensor networks. When using the current method to fuse data in wireless sensor networks, the fusing time is too long to remove the noise signal in wireless sensor networks effectively. In the process of fusing, data packet loss is easy to occur. There are some problems such as low fusion efficiency, poor denoising performance and high packet loss rate. A multi-path data hierarchical fusion method based on routing algorithm is proposed in this paper. The redundant node decision method based on mesh partitioning is combined with the grid algorithm and EECRS protocol to establish a routing protocol based on redundant node elimination, and the redundant data existing in the redundant nodes of the wireless sensor network is removed. Based on the statistical data of the data, the probability density function is deduced and analyzed, and the noise filtering matrix is constructed to optimize the measurement matrix and remove the noise existing in the wireless sensor network. The multi-path scheduling technology is used to synthesize the pheromone table and the data forwarding flow table, and the ant is used to actively monitor the link QOS real-time information in the path finding process to update the pheromone table and the flow table, and calculate the link idle rate according to the update result. According to the calculation result, the data transmission path is selected, and the multi-path data layer fusion is completed. The experimental results show that the proposed method has high fusion efficiency, good denoising performance and low packet loss rate.

The extensive usage of wireless sensor networks (WSNs) has led to the development of many power- and energy-efficient routing protocols. Cooperative routing in WSNs can improve performance in these types of networks. In this paper we discuss the existing proposals and we propose a routing algorithm for wireless sensor networks called Power Efficient Location-based Cooperative Routing with Transmission Power-upper-limit (PELCR-TP). The algorithm is based on the principle of minimum link power and aims to take advantage of nodes cooperation to make the link work well in WSNs with a low transmission power. In the proposed scheme, with a determined transmission power upper limit, nodes find the most appropriate next nodes and single-relay nodes with the proposed algorithm. Moreover, this proposal subtly avoids non-working nodes, because we add a Bad nodes Avoidance Strategy (BAS). Simulation results show that the proposed algorithm with BAS can significantly improve the performance in reducing the overall link power, enhancing the transmission success rate and decreasing the retransmission rate.