NOMA-Based VLC Systems: A Comprehensive Review

The exponential rise in wireless communication demands and allied applications have revitalized academia-industries to develop an efficient and potential solution. Furthermore, the high-pace increasing scarcity of radio spectrum has also alarmed researchers to achieve better Quality of Service (QoS) centric solution. To meet such demands Visible Light Communication (VLC) systems have gained global attention; however, up surging high rate, range and reliability (3R) needs demand better performance. Towards these goals, Multiple Input Multiple Output (MIMO) based VLC systems is an efficient approach; though its efficacy under Multiple Users (MU) conditions remains least explored. Enabling MIMO-MU based VLC can achieve 3R objectives effectively; however, factors like multipath attenuation, interferences and varied impairment-affects makes classical approached confined. The MIMO-MU VLC systems require robust error, noise or interference resilient transmission even under adverse conditions such as non-linear LED, multipath attenuation and interference. Towards these objectives, in this paper a highly robust MIMO-MU VLC system is developed that incorporates an augmented MIMO channel design and combined pre-coding and post equalization schemes. To alleviate major interference probability in MIMO-MU environment, proposed model incorporates time (delay)-multiplexing based data transmission followed by signal adaptive precoding and Volterra Kernel based Hybrid-equalizer. This approach enables interference and noise removal as well as LED non-linearity handling under MIMO-MU VLC communication. The use of a Volterra Kernel based Decision Feedback Equalization with both linear as well as non-linear equalization enables proposed VLC system to exhibit low Bit Error Rate with low modulation index and taps, that optimizes trade-off between performance as well as complexity.

Integrating visible light communication (VLC) with the reconfigurable intelligent surface (RIS) significantly enhances physical layer security by enabling precise directional signal control and dynamic adaptation to the communication environment. These capabilities strengthen the confidentiality and security of VLC systems. This paper presents a comprehensive study on the joint optimization of VLC access point (AP) power allocation, RIS association, and RIS elements orientation angles for secure VLC systems, while considering rate-splitting multiple access (RSMA) and power-domain non-orthogonal multiple access (NOMA) schemes. Specifically, two frameworks are proposed to maximize both the minimum secrecy rate (SR) and the minimum secrecy energy efficiency (SEE) by jointly optimizing power allocation, RIS association, and RIS elements orientation angles for both power-domain NOMA and RSMA-based VLC systems. The proposed frameworks consider random device orientation and guarantee the minimum user-rate requirement. The proposed optimization frameworks belong to the class of mixed integer nonlinear programming, which has no known feasible solution methodology to guarantee the optimal solution. Moreover, the increased degree of freedom and flexibility from the joint consideration of power control, RIS association and element orientation results in a large set of decision variables and constraints, which further complicates the optimization problem. To that end, we utilize a genetic algorithm-based solution method, which through its exploration and exploitation capabilities can obtain a good quality solution. Additionally, comprehensive simulations show that the RSMA scheme outperforms the power-domain NOMA scheme across both the SR and SEE metrics over various network parameters. Furthermore, useful insights on the impact of minimum user rate requirement, number of RIS elements, and maximum VLC AP transmit power on the minimum SR and SEE performances are provided.

Multiple-input multiple-output (MIMO) technique is now used in most new broadband communication system, and orthogonal frequency division multiplexing (OFDM) is also utilized within current 4^th generation (4G) of mobile telecommunication technology. With MIMO and OFDM combined, visible light communication (VLC) system’s diversity gain is increase, yet system capacity for dispersive channels is also enhanced. Moreover, with the emerging massive MIMO-OFDM VLC system, there are significant advantages than smaller systems’ such as channel hardening, further increasing of energy efficiency (EE) and spectral efficiency (SE) based on law of large number. This paper addresses one of the major technological challenges, system architecture design, which was solved by semispherical beehive structure (SBS) receiver and so that diversity gain can be identified and applied in Massive MIMO VLC system. Simulation results shows that the proposed design clearly presents a spatial diversity over conventional VLC systems.

Recently, multiple-input multiple-output (MIMO) has been proposed in visible light communications (VLC) systems to boost the data rate by utilizing spatial multiplexing. Unlike RF systems in VLC, lighting requirements, such as dimming control, should be taken into consideration for the design of a VLC transceiver. Moreover, VLC systems are inherently nonlinear and dynamic-range-limited. To drive an LED transmitter, the signal is bounded by a turn-on value and a saturation value. In this letter, we show how the dynamic-range constraint and dimming control impact the design of MIMO transceiver. Three different MIMO schemes are proposed and studied by theoretical analysis and simulation.

In visible light communication (VLC) system, the Orthogonal Frequency Division Multiplexing (OFDM) technique has been widely used to achieve a high data rate transmission. However, OFDM will cause high peak-to-average power ratio (PAPR) in the VLC system. In this paper, we propose and experimentally demonstrate a new interleaved Discrete Fourier Transform Spread Orthogonal Frequency Division Multiplexing (DFT-S OFDM) method. We compare the interleaved DFT-S technique to other PAPR reduction techniques, such as Clipping OFDM and conventional DFT-S. The experimental results show that interleaved DFT-S achieve FEC threshold for an overall 2.0Gb/s 32QAM signal over the 1.05m transmission. In addition, interleaved DFT-S presents significant PAPR reduction, low complexity and optimal BER performance, when compared to other techniques.

In this paper, relaying technique and non-orthogonal multiple access (NOMA) are adopted to improve performance of visible light communication (VLC) system. Due to the adoption of relay terminal, the link reliability and communication coverage of VLC system are boosted. Besides, the utilization of NOMA can greatly increase spectral efficiency and support massive connectivity. So, a cooperative NOMA-based DCO-OFDM VLC system is proposed. All the optical transmission links use DCO-OFDM to accomplish information transmission. The relay terminal in the proposed system not only forwards the source signal but also sends its own signal simultaneously. The signals over the links between relay and two users are superposed based on NOMA. Under different cases, the total throughput is analyzed and the optimal power allocation factor is obtained. In addition, the OMA-based system is taken as the benchmark system. The simulation results further verify the theoretical results and the superiority that the proposed system has.

Visible light communication (VLC) system based on orthogonal frequency division multiplexing (OFDM) is promising for its ability to link a huge number of devices with high reliability and low latency. However, OFDM-based VLC systems are very sensitive to the symbol timing offsets. Thus, synchronisation algorithm is very important for OFDM-based VLC system. In this study, the authors first propose zero correlation code pair (ZCC pair) and investigate the periodical impulse-shaped correlation property of ZCC pair. Then the authors propose a novel timing offset estimation algorithm based on ZCC pair. The preamble is processed via peak-to-average power ratio (PAPR) reduction algorithms to overcome the PAPR problem in VLC systems. This algorithm achieves high accuracy and has low synchronisation error probability. The effectiveness of the authors' proposed algorithm has been demonstrated using computer simulation under non-light-of-sight VLC and Gaussian channels. The results show that the authors' algorithm outperforms the Schmidl Cox's and Park's algorithms in terms of synchronisation error probability and mean square error of timing error.

In this paper, we propose a theoretical framework for analyzing the performance of the short-packet communication (SPC) in a downlink non-orthogonal multiple access (NOMA) visible light communication (VLC) system in which one light emitting diode (LED) communicates with two single-photodiode users. The analytical expression of the block error rate (BLER) is approximated by Gaussian-Chebyshev quadrature method, based on which the reliability, throughput, and latency expressions are deduced. Further, we jointly optimize power allocation coefficients and transmission rates to maximize sum throughput of the SPC-NOMA VLC system. The numerical results show that (i) our proposed system well satisfies the stringent requirements of the ultra-reliable and low latency communication (URLLC) at signal-to-noise ratio (SNR) larger than 130 dB; (ii) SPC-NOMA VLC systems outperform SPC- orthogonal multiple access (OMA) VLC systems in terms of reliability, latency, and throughput; (iii) the impacts of block-length, power allocation coefficients, transmission rates, and LED semi-angle are examined.

In general, visible light communication (VLC) systems, which utilise white light-emitting diodes (LEDs), only offer a bandwidth limited to the lower MHz region. Therefore, providing VLC-based high data rate communications systems using VLC becomes a challenging task. To address this challenge, we propose a solution based on multiplexing in both the frequency and space domains. We experimentally demonstrate a 4 × 4 imaging multiple-input multiple-output (MIMO) VLC system (i.e., space multiplexing) utilising multiband carrierless amplitude and phase (m-CAP) modulation (i.e., frequency multiplexing). Independently, both MIMO and m-CAP have separately shown the remarkable ability to improve the transmission speeds in VLC systems, and hence, here we combine them to further improve the net data rate. We investigate the link performance by varying the number of subcarriers m, link distance L, and signal bandwidth B <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">sig</sub> . From all the values tested, we show that a data rate of ~249 Mb/s can be maximally achieved for m = 20, B <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">sig</sub> = 20 MHz, and L = 1 m, at a bit error rate of 3.2 × 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-3</sup> using LEDs with ~4 MHz bandwidth.

While the traditional Visible Light Communication (VLC) system has attracted a lot of research attentions on boosting throughput, using Commercial Off-The-Shelf (COTS) devices, e.g. existing cameras on the smartphones, is a recent trend to implement readily deployable VLC systems. In particular, since LED-Camera VLC systems have shown a promising potential in large indoor communication due to the growing deployment of LED lighting infrastructure, a comprehensive VLC system with cooperative transmission and roaming support has become an impending need. To this end, we propose a novel VLC and visible light sensing (VLS) system to address that by leveraging LED sensing and effective encoding/decoding schemes. It is achieved first by utilizing LED sensing via converting parts of LED luminaire into light sensors to detect diffuse reflection change caused by presence of the user. After the users are detected and located, the system employs rateless codes and newly designed code assignment scheme to collaboratively transmit to detected users in their communication cells. We believe the proposed system has the potential to a roaming support VLC system in the whole building or indoor areas.

• Core Innovation & Objective • Developed a novel, integrated system architecture combining a modified USRP X310 software-defined radio platform with a custom-designed high-power LED optical transceiver. • Achieved high-speed, low-latency, and highly reliable audio-video transmission over Visible Light Communication (VLC) for intelligent transportation and vehicle-to-vehicle (V2V) applications, particularly in electromagnetically sensitive environments. • Key Technical Breakthroughs • LED Bandwidth Extension: Designed an innovative active pre-equalization circuit (based on a 4th-order high-pass RC bypass and op-amps) that dramatically increased the 3dB modulation bandwidth of a commercial 15W LED from 3 MHz to 120 MHz. • High-Speed Modulation: Successfully implemented 64QAM-OFDM modulation/demodulation using GNU Radio on the USRP, enabling spectrally efficient data transmission. • Advanced Optical Design: Custom-designed optical lenses (transmitter and receiver) and a high-power Bias-T circuit for efficient AC/DC coupling, ensuring the LED operates in its linear region and maximizing optical power transfer. • Stable Link Performance: Incorporated an Automatic Gain Control (AGC) circuit at the receiver, stabilizing the output voltage between 1.2V - 2.0V and maintaining a modulation signal-to-noise ratio (SNR) > 23 dB over varying distances. • Outstanding System Performance • The experimentally demonstrated performance metrics are exceptional for a VLC system: • Peak Data Rate: 500 Mbps • Communication Distance: 0 - 110 meters • Bit Error Rate (BER): As low as 1.74 × 10⁻⁵ (far below the 1 × 10⁻⁴ target) • End-to-End Latency: < 0.1 s • Beam Angle: 11.5° (Transmitter) • Field of View (FOV): ≤ 18° (Receiver) • System Integration and Design • Hardware-Software Co-Design: Seamless integration of the USRP X310 (handling digital baseband processing) with the custom analog optical front-end. • Compact and Practical: The system is designed for external mounting on vehicles, offering a practical solution for real-world deployment. • Simulation-Guided Design: Used LightTools for optical design and Optisystem for communication link simulation to validate the design before implementation. • Significance and Application Value • Solves Critical Challenges: Provides a high-speed, secure, and EMI-free communication alternative to traditional RF in environments like military operations, petroleum facilities, and intelligent transportation systems. • 6G Potential: Serves as a practical reference for the development of VLC as a complementary technology in 6G networks. • Demonstrates Feasibility: Successfully proves the viability of using commercial LEDs and USRP platforms for building high-performance, medium-to-long-range optical communication systems. • This work represents a significant step forward in practical high-speed VLC system design, combining theoretical innovation with robust engineering to achieve state-of-the-art performance. Existing vehicular VLC systems suffer from limited bandwidth, short transmission distances, low data rates, and support only a narrow range of communication services. To address these issues, this paper proposes a vehicle-mounted high-speed LED visible light communication (VLC) system based on Universal Software Radio Peripheral (USRP). Leveraging 64QAM-OFDM digital modulation, an improved USRP X310 hardware platform, and a PC, we establish a novel architecture comprising digital baseband and optical transceiver modules. The baseband module eliminates traditional spectrum-shifting circuits and antennas, retaining only FPGA and ADC/DAC units. Audio/video files undergo 64QAM-OFDM modulation directly on the PC, with modulated signals output via DAC to a custom-designed wide-bandwidth LED transceiver. A broadband hardware equalization network based on a fourth-order RC bypass circuit was designed expands the 3dB bandwidth of high-power LEDs from 3 MHz to 120 MHz. Combined with automatic gain control (AGC), this achieves an optical transceiver with 12–15 W output power, >23 dB optical modulation signal-to-noise ratio (SNR), and stable receiver output voltage (1.2–2.0 V). The resulting compact system delivers low latency, high data rates, and high reliability. Under aligned optical path conditions, the system achieves >1 Mbit/s at 110 m (BER 0.49 × 10⁻⁵, delay 0.009-0.05s) and a peak rate of 500 Mbit/s at 10 m (BER 7.4 × 10⁻⁵), with an 11.5° transmit angle and a receiver field of view (FOV) of less than 18°. This work demonstrates the feasibility of high-power LED-based 64QAM-OFDM communication using USRP X310 for medium- to long-range vehicular links, providing a reference for intelligent transportation systems.

A low complexity power allocation scheme for NOMA-based indoor VLC systems

Reconfigurable Intelligent Surfaces (RISs) and Non-Orthogonal Multiple Access (NOMA) can enhance Visible Light Communication (VLC) systems by mitigating signal blockage and improving spectrum utilization. While boosting communication efficiency is crucial, maintaining high illumination quality is equally important. This paper investigates a novel approach to simultaneously improving the sum rate (SR) and illumination uniformity (IU) in a RIS-assisted NOMA-based VLC system. Communication and illumination optimization problems are formulated as a non-convex mixed-integer non-linear programming problem, considering RIS placement, LED-user association, and power allocation. To the best of our knowledge, this is the first work to jointly optimize SR and IU with explicit consideration of RIS placement. We propose a joint optimization approach that leverages a differential evolution algorithm to optimize RIS placement. During each iteration, the obtained solutions are further refined using a block coordinate descent algorithm, which iteratively solves the decomposed sub-problems of LED-user association and power allocation. Simulation results show that the approach outperforms existing methods in both SR and IU. Moreover, RIS placement optimization is shown to be crucial, as neglecting it significantly degrades performance. Finally, the impacts of noise power and total LED power are analyzed, offering practical insights for parameter selection in VLC systems.

Visible light communication (VLC) is considered a breakthrough wireless communication technology that has been proven capable of achieving very high data rates. This is a key advantage in indoor communication scenarios, since the vast majority of wireless traffic is witnessed in indoor communications. In every wireless system, the trade-off between achievable throughput, transmit signal power and corresponding error rate performance is largely dependent upon the considered modulation format. This is also the case in VLC systems, which are typically characterized by stringent performance requirements. Motivated by this, in the present contribution we introduce the space shift keying (SSK) modulation scheme in the context of non-orthogonal-multiple-access (NOMA) communications, which have been shown to be a performance enhancer of indoor based VLC systems. Based on this, all network users in the considered set up receive the same superimposed signal of all NOMA users, which is transmitted from the activated transmitters corresponding to the multiplexed SSK users information. Based on this and assuming a unique maximum likelihood detection, we quantity the system performance in terms of the corresponding bit error rate (BER) performance at each receiver. This analysis leads to the development of useful insights of theoretical and practical interest, which are expected to be useful in the effective design, implementation and deployment of SSK in NOMA based VLC systems.

Power control technology is necessary in Visible Light Communication (VLC) systems because of the multipath distortion and shadowing. When a power control algorithm is applied to the system, feedback error is inevitable. In this paper, we analyze the closed-loop power control algorithm and the influence of the power control error (PCE) in VLC systems. To analyze the effect of the PCE in VLC systems, the proposed system is studied with different modulation schemes and coding rates in terms of BER.