Optimal next hop selection for VANET routing

Objectives: To explored the highlighted obliged QoS routing issue in Vehicular Ad hoc Networks (VANETs). Methods/ Statistical Analysis: The issues are tended to firstly by working up an association faithful quality model considering the topological and numerical properties of vehicular advancements and speeds. The VANET correspondence diagram in advancing chart hypothesis is used to model and organize the formed association trustworthiness shown into it. In light of the consequent intensified chart diagram illustrate, the most tried and true course in the framework is picked. However course assurance does not ensure awesome transmission as well. Findings: Vehicular extraordinarily designated Systems (VANETs) are a particular sort of remote framework made by vehicles giving among themselves and with roadside base stations. A broad assortment of organizations has been made for VANETs going from security to infotainment applications. A key need for such organizations is that they are offered with Nature of Administration Quality of Service (QoS) guarantees similar to organization unfaltering quality and availability. QoS routing expect an essential part in recognizing courses that meet the QoS necessities of the offered organization over VANETs. For filtering the achievable courses it subject to various QoS goals is with everything taken into account a NP-difficult issue. Furthermore, the reliability of the routing ought to be given unprecedented thought as correspondence associations, as frequently as conceivable in VANETs. In present situation, the most existing QoS routing calculations are been PSO algorithm for stable VANET system without considering the security and wellbeing of the routing procedure. Along these lines, they are not appropriate for applications in VANETs. Application/Improvements: Low complexity nature advanced administration dependable routing calculation is made to ensure to lessen transmission redundancy with use of Subterranean insect State estimation with better eventual outcomes of course decision and transmission considering better request and sorting calculations in the Particle Swam Optimization (PSO) algorithm work calculation for extremely powerful VANET system with less preferred quality in evaluation with favoured data transmission over interchange QoS counts as shown by the results and satisfy QoS requirements of specific traffic using PSO in the VANET routing protocol environments. Meanwhile, an optimized function with PSO is also proposed to make scheduling decisions so that the dropped packet rates are reduced. The results of PSO algorithm simulations are better and feasible as compared to the previous techniques. Keywords: Graph Theory, Optimised Service Reliable Routing Algorithm, Particle Swam Optimization, Quality of Service, Roadside Base Stations, VANET

Bayesian optimization has been used for the global optimization of communication parameters of Vehicular Ad Hoc Networks (VANETs) for safety applications with stringent quality of service (QoS) requirements. However, the effectiveness of the methodology relies on an accurate analytic model for querying a distribution over functions, which is not practical. Furthermore, incorporating QoS requirements as constraints into the search process is cumbersome, timeconsuming, and even unreliable. In this paper, we present a new approach to the constrained Bayesian optimization of IEEE 802.11 based VANETs for safety messaging with the help of deep learning neural networks (DLNNs). First, we design and train a DLNN using data collected from the analytic models or channel measurements to approximate a mapping from the search parameter space to the QoS metrics. The QoS constraints are naturally incorporated into the DLNN through preprocessing data pairs that cannot meet the QoS requirements. Then, the Bayesian optimization is conducted to find the optimal communication parameters for the best channel usage on the condition that all QoS requirements are met. Accordingly, experiments are carried out on the Google Colab platform where the impact of DLNN structure, data sampling rate, and other optimization parameters are investigated. In comparison to other optimization approaches, utilizing a DLNN in the Bayesian optimization process is more time efficient and flexible.

Vehicular ad hoc network (VANET) is an emerging network technology with the goal of providing public safety, traffic coordination and infotainment for the comfort of passengers in moving vehicles. However, it faces the challenge of not providing the expected quality of service (QoS) when streaming videos online. This challenge emanate from the variable topology infrastructure caused by intrinsic high mobility nodes and dynamic environments of VANETs. A better QoS in video applications can possibly be achieved if suitable routing protocols (RPs) is/are used. Hence, this paper compared and analyzed four existing routing protocols in VANETs. The objective was to identify an efficient RPs that can deliver better QoS for video streaming applications with respect to number of nodes used. A simulation was conducted using OPNET 14.5 Modeler and results analyzed with respect to throughput, delay and routing traffic received. Results shows that OLSR performance is better when few nodes are used and AODV shows better service when many nodes are used, thereby guaranteeing the user high quality of video when streaming online. Based on the results, it would be recommended that OLSR and AODV be used as hybrid protocol to provide better QoS for video streaming in VANETs.

Vehicular ad hoc networks (VANETs) present an intriguing platform for several applications on e.g., intelligent transportation system (ITS) and infotainment applications aspire to be the main pattern of communication among vehicles while travelling. This can significantly impact on the amount of data exchanged by vehicles, increasing the contention on communication links and thus, degrading the quality of service of these applications. So, discrimination of data becomes imperative and forwarding critical information on suitable routes becomes decisive. Hence, a quality of service (QoS)-driven mechanism is needed to handle and assign network resources according to the stringent application data traffic demands. But, VANETs high node mobility and frequent link failure, stuck a big challenge in implementing an effective policy to meet and enforce these QoS requirements. A promising way to tackle this issue is to enforce QoS at the network layer, since it is the crucial point in VANETs’ communication. So, over the years, many QoS-aware routing protocols were specifically conceived for VANETs. In this paper, we present a comprehensive survey of QoS-aware routing protocols in VANETs’ literature. We examined the protocols based on their ability to support ITS infotainment services, their multi-constraint path problem (MCP), protocol’s functionality and weakness, objectives and design challenges. This way, we outline future directions for VANETs QoS-aware protocol research.

Past few decades have witnessed large increase in number of vehicles on roads due to which the traffic safety needs have also become complex and hence necessary to be taken care of. Vehicular ad hoc networks (VANETs) are becoming an asset for achieving all these goals. VANETs provide applications like driver assistance, passenger comfort and vehicle safety. Apart from its general characteristics due to the dynamic nature of road environments and traffic patterns, communication linkage among vehicles in VANETs suffers breakage problem hence requires a very reliable routing protocol. To manage the communication efficiently many routing protocols are already available for MANETs which can be further used for routing and communication among vehicles in VANETs, but characteristics of these two networks (VANET and MANET) are very different, so there is requirement to enhance these MANET routing protocols so that those can be used in VANETs. When we use some existing routing protocols in VANET then number of link breakage are surprisingly high because mobility is higher in VANETs as compared to MANETs. So this paper presents advanced version of an existing MANET routing protocol for better performance in VANET environment. The new routing protocol has removed problem of large number of routing error messages which was existing in AODV routing protocol. Protocol proposed in this paper has better results as compared to AODV and paper has also shown results of simulation and also elaborated the findings.

Vehicular Ad Hoc Network (VANET) is a multi-hop wireless network which involves vehicles acting as nodes to communicate with each other without infrastructural support. With the increase in Quality of Service (QoS) needs in evolving applications and the widespread use of wireless and mobile devices, it is desirable to support QoS in VANETs. The resource limitations and variability further add to the need for QoS support in such networks. However, the characteristics of these networks make QoS support a complex process due to rapid topology changes caused by high mobility of communicating nodes. Modulation scheme implemented in wireless network affect the data rate hence the throughput of the communicating nodes, this in turn affect QoS. The paper focuses on adaptive modulation to improve the data throughput and efficiency of channel spectrum in VANET. Through theoretical and simulation results, it was shown that adaptive modulation performs well and improves throughput than other modulations schemes when used singularly in dynamic changing network topology like VANET.

Vehicular ad-hoc network (VANET) technology enables communication between vehicles, or vehicles and road-side units (RSUs) through wireless communication devices installed on the vehicles. One of the most important goals of VANETs is providing safety applications for passengers. In addition, VANETs provide comfort applications to users. Guaranteeing a reliable and stable routing protocol over VANETs is a very important step. The proposed research attempts to improve routing protocols that decrease the end-to-end delay to suit VANET communication characteristics. In addition, it proposes analysis of the end-to-end delay probability distribution. More specifically, we derive a closed-form expression for the probability distribution of the re-healing delay in a VANET conditioned on the distance between two VANET clusters. Furthermore, we propose a closed-form expression for the probability distribution of the unconditional re-healing delay. Moreover, we develop a mathematical model to calculate the probability distribution of the end-to-end delay. On the other hand, using Unmanned Aerial Vehicles (UAVs) or drones in wireless communications and Vehicular Ad-hoc Networks (VANETs) has started to attract attention. We propose a routing protocol that uses infrastructure drones for boosting VANET communications to achieve a minimum vehicle-to-drone packet delivery delay. In addition, we propose a closed-form expression for the probability distribution of the vehicle-to-drone packet delivery delay on a two-way highway. Moreover, based on that closed-form expression, we can calculate the minimum drone density (maximum separation distance between two adjacent drones) that stochastically limits the worst case of the vehicle-to-drone packet delivery delay. Furthermore, we propose a drones-active service (DAS) that is added to the location service in a VANET. This service dynamically and periodically obtains the required number of active drones based on the current highway connectivity state by obtaining the maximum distance between each two adjacent drones while satisfying a probabilistic constraint for vehicle-todrone packet delivery delay. Our analysis focuses on two-way highway VANET networks with low vehicular density. The simulation results show the accuracy of our analysis and reflect the relation between the drone density, vehicular density and speed, other VANET parameters, and the vehicle-to-drone packet delivery delay. In addition, we propose a new routing protocol called multi-copy intersection-based routing (MCIR) for vehicular ad-hoc networks (VANETs) in urban areas. MCIR is an intersectionbased routing protocol that forwards multiple copies of the packets in different road segments. Moreover, it is a beacon-less routing protocol with a carry-and-forward strategy. We show via simulation that the MCIR protocol is superior to other existing routing protocols, especially in low vehicular density scenarios. The results show that MCIR achieves a shorter end-to-end delay and a higher packet delivery ratio in urban VANET communications.

VANET (Vehicular Ad Hoc Network) is a significant term in ITS (intelligent transportation systems). VANETs are also mentioned as ITN (intelligent transportation Networks), which are used to enhance road safety in growing technology. The connectivity of nodes is a challenging one because of its high mobility and the sparse network connectivity must be handled properly during its initial deployment of a VANET for avoiding accidents. Quality of service (QoS) in VANET becomes a significant term because of its increasing dare about unique features, like poor link quality, high mobility, and inadequate transporting distance. Routing is the foremost issue in the wireless ad hoc network, which is used to transmit data packets significantly. This paper provides a crucial review of the classification of existing QoS routing protocols, cross-layer design approach and classification, and various performance parameters used in QoS routing protocols. The corresponding cross-layer protocols are overviewed, followed by the major techniques in cross-layer protocol design. Moreover, VANET is presented with many exclusive networking research challenges in precise areas such as security, QoS, mobility, effective channel utilization, and scalability. Finally, the paper concluded by various comparison discussion, issues, and challenges of several routing protocols for VANET. No. of publications over the period from 2010 to 2019 in various scientific sources also showed in this review. This survey provided the technical direction for researchers on routing protocols for VANET using QoS.

The Vehicular Ad Hoc Network (VANET) is a novel and auspicious performance within the Intelligent Transportation Systems (ITS) field. Numerous scholars endeavoured to enhance the VANETs' Quality of Service (QoS) by creating routing procedures that were reliable, scalable, and efficient. One of the most significant issues of vehicular networks is building a routing protocol that guarantees a specific level of quality of service (QoS), as VANETs are distinguished by special properties, including constrained mobility, a very dynamic topology, and high node speed. For drivers to be able to make the right decisions, communication between vehicular nodes must be highly reliable. Link breakdown issues typically lower the quality of service (QoS) of a vehicular ad hoc network (VANET). This, in turn, lowers the following parameters that influence the QoS. This method depends on a for parameter Packet parameter of Delivery Ratio (PDR ), Packet Loss, Delay of End to End, and Throughput. The simulation results show that the proposal protocol has increased the longevity effectiveness of the network by around (PDR) 93%, Loss of packet 6%, (E2ED) 45.6 seconds, and Throughput 1500/ bps.

A new concept such as smart city was introduced in the last years where the Intelligent Transportation system (ITS ) plays a critical role to provide road safety and manage Vehicular Ad Hoc Networks (VANETs) traffic. Nevertheless, VANETs have significant constraints like nodes high mobility, intermittent connectivity, variable network density and heterogeneity. However, the different types of traffic, the different Quality of Service requirements, the need to exchange mobile data, multi-services and data diversity leads mainly to load and time constraints in this specific and stringent type of networks. The main characteristic of this kind of networks is the very changing topology that poses supplementary constraints and makes achieving QoS constraints a very challenging task. In VANET network the vehicle generated traffic will be transferred to the data center from road side unit to the base station by using Long Term Evolution (LTE) in an urban area. Despite LTE has a larger system capacity and it provides a higher transmission speed, the network performance is affected by the implemented scheduling algorithm. In this context, we study the efficiency of LTE scheduler algorithms such as Proportional Fairness, Round Robin, Priority Set Scheduler, Maximum Throughput Scheduler and Throughput to Average Scheduler and Blind Equal Throughput mainly at the road side unit using Network Simulator 3(NS3) to determinate the most suitable scheduler for VANET traffic. Results demonstrate that the round robin algorithm is more effective for volumetric VANET traffic in terms of throughput, delay, packet loss rate and fairness.

SummaryThe rapid growth of vehicular applications has resulted in high demand for Internet technology, which demands an unprecedented network capacity and a high quality of service (QoS). In vehicular ad hoc networks (VANETs), since nodes (vehicles) are highly mobile. The dynamic nature of the network topology in the VANET system changes due to frequent changes in link connectivity. The vehicles‐to‐vehicles (V2V), vehicles‐to‐infrastructure (V2I), and QoS, as well as the heterogeneity of applications within the VANET. VANETs have been introduced to make driving comfortable by providing safety and support to drivers. Due to the flexibility and offloading schemes available in‐vehicle applications, there are some limitations. However, there are many issues in providing optimum service provisioning and scheduling in the vehicular environment. In VANETs, BSs and roadside units (RSUs) improve QoS. However, Internet services transmit packets to vehicles using stochastic models, and it predicts the traffic on a VANET. We provide open challenges to drive stochastic models in this direction.

Vehicular ad hoc networks (VANETs) are a special form of wireless networks made by vehicles communicating among themselves on roads. The conventional routing protocols proposed for mobile ad hoc networks (MANETs) work poorly in VANETs. As communication links break more frequently in VANETs than in MANETs, the routing reliability of such highly dynamic networks needs to be paid special attention. To date, very little research has focused on the routing reliability of VANETs on highways. In this paper, we use the evolving graph theory to model the VANET communication graph on a highway. The extended evolving graph helps capture the evolving characteristics of the vehicular network topology and determines the reliable routes preemptively. This paper is the first to propose an evolving graph-based reliable routing scheme for VANETs to facilitate quality-of-service (QoS) support in the routing process. A new algorithm is developed to find the most reliable route in the VANET evolving graph from the source to the destination. We demonstrate, through the simulation results, that our proposed scheme significantly outperforms the related protocols in the literature.

Vehicular Ad Hoc Network (VANET) is an extension to Mobile Ad Hoc Network (MANET) technology. VANET differs from MANET because it contains high mobility of nodes and large scale of networks. In this paper, real-time maps of certain areas in Shah Alam had been chosen and edited using JAVA Open Street Map editor (JOSM). Mobility Model Generator for VANET (MOVE) and Simulation of Urban Mobility (SUMO) are used to create the scenarios and traffics for urban and rural area network. The simulation is done in NS-2 with DSRC and Wi-Fi Direct standard using AODV routing protocol to evaluate various Quality of Service (QoS) parameters such as throughput, end-to-end delay, and packet delivery ratio (PDR) for the selected areas. The main discoveries of this paper are that the throughput and end-to-end delay increases as the number of mobile nodes increases. PDR does not get affected by the number of mobile nodes but instead depends on other factors including coverage of standards and traffic pattern. To summarize, VANET in rural scenario gives better performance as compared to the urban scenario.

Recent advances in hardware, software, and communication technologies are enabling the design and implementation of a whole range of different types of networks that are being deployed in various environments. One such network that has received a lot of interest in the last couple of years is the Vehicular Ad-Hoc Network (VANET). VANET has become an active area of research, standardization, and development because it has tremendous potential to improve vehicle and road safety, traffic efficiency, and convenience as well as comfort to both drivers and passengers. Recent research efforts have placed a strong emphasis on novel VANET design architectures and implementations. A lot of VANET research work have focused on specific areas including routing, broadcasting, Quality of Service (QoS), and security. We survey some of the recent research results in these areas. We present a review of wireless access standards for VANETs, and describe some of the recent VANET trials and deployments in the US, Japan, and the European Union. In addition, we also briefly present some of the simulators currently available to VANET researchers for VANET simulations and we assess their benefits and limitations. Finally, we outline some of the VANET research challenges that still need to be addressed to enable the ubiquitous deployment and widespead adoption of scalable, reliable, robust, and secure VANET architectures, protocols, technologies, and services.

As the automotive and telecommunication industries advance, more vehicles are becoming connected, leading to the realization of intelligent transportation systems (ITS). Vehicular ad-hoc network (VANET) supports various ITS services, including safety, convenience, and infotainment services for drivers and passengers. Generally, such services are realized through data sharing among vehicles and nearby infrastructures or vehicles over multi-hop data routing mechanisms. Vehicular data routing faces many challenges caused by vehicle dynamicity, intermittent connectivity, and diverse application requirements. Consequently, the software-defined networking (SDN) paradigm offers unique features such as programmability and flexibility to enhance vehicular network performance and management and meet the quality of services (QoS) requirements of various VANET services. Recently, VANET routing protocols have been improved using the multilevel knowledge and an up-to-date global view of traffic conditions offered by SDN technology. The primary objective of this study is to furnish comprehensive information regarding the current SDN-based VANET routing protocols, encompassing intricate details of their underlying mechanisms, forwarding algorithms, and architectural considerations. Each protocol will be thoroughly examined individually, elucidating its strengths, weaknesses, and proposed enhancements. Also, the software-defined vehicular network (SDVN) architectures are presented according to their operation modes and controlling degree. Then, the potential of SDN-based VANET is explored from the aspect of routing and the design requirements of routing protocols in SDVNs. SDVN routing algorithms are uniquely classified according to various criteria. In addition, a complete comparative analysis will be achieved to analyze the protocols regarding performance, optimization, and simulation results. Finally, the challenges and upcoming research directions for developing such protocols are widely stated here. By presenting such insights, this paper provides a comprehensive overview and inspires researchers to enhance existing protocols and explore novel solutions, thereby paving the way for innovation in this field.