• Home
  • Search
  • Optimization of Machining Parameters for Nylon 6 Composite in CNC Lathe Using PCA-Based TOPSIS
  • Cite Icon3
  • https://doi.org/10.37628/ijmmp.v4i1.624Copy DOI Icon

Optimization of Machining Parameters for Nylon 6 Composite in CNC Lathe Using PCA-Based TOPSIS

Show More
  • Abstract
  • Literature Map
  • Citations
  • Similar Papers
Abstract

This work investigates the parametric optimization of CNC turning operation for Nylon 6 with principal component analysis (PCA) and technique for order preference by similarity to ideal solution (TOPSIS) based on Taguchi approach. Taguchi’s L16 orthogonal array takes 16 experimental runs to execute the design matrix of turning parameters through PCA coupled with TOPSIS, utilizing relevant experimental data as obtained through experimentation. Turning speed (TS), feed rate (FD) and depth of cut (DOC) are optimized with the consideration of multiple performance characteristics, namely surface roughness Ra (µm), Rz (µm), material removal rate (MRR) (cm3/sec), and machining time (MT) (sec). The capabilities of the above proposed models have been tested through the analysis of variance. Lastly, confirmation tests were executed to sort a comparison between the experimental results and predicted values. It is found that FD is the most significant parameter followed by TS and DOC. The surface roughness parameters (Ra, Rz) and machining time as smaller the better and MRR as larger the better.

Similar Papers
  • PDF
  • Research Article
  • Citations36

Multiresponse Optimization of Process Parameters in Turning of GFRP Using TOPSIS Method

  • Oct 29, 2014
  • International Scholarly Research Notices
  • Arun Kumar Parida +1
  • Research Article
  • Citations28

Parameter optimisation to combine low energy consumption with high surface integrity in turning Mg/Al2O3 hybrid composites under dry and MQL conditions

  • Jan 22, 2019
  • Journal of the Brazilian Society of Mechanical Sciences and Engineering
  • E Suneesh +1
  • Research Article
  • Citations17

On Solving Parametric Optimization Problem of an End Milling Process for Machining of Al 1070 using MCDM Techniques: A Comparative Analysis

  • May 29, 2023
  • Advances in Materials and Processing Technologies
  • Ranjan Kumar Ghadai +2
  • Research Article
  • Citations1

OPTIMIZATION OF FACE MILLING PROCESS OF TI-6AL-4V TITANIUM ALLOY UNDER MQL CONDITIONS USING A COMBINATION OF MOPSO AND TOPSIS METHODS

  • Apr 30, 2025
  • Surface Review and Letters
  • Van-Canh Nguyen +3
  • Research Article
  • Citations204

Multi objective optimization using different methods of assigning weights to energy consumption responses, surface roughness and material removal rate during rough turning operation

  • Jun 09, 2017
  • Journal of Cleaner Production
  • Raman Kumar +2
  • Research Article
  • Citations7

Selection of optimal machining parameters using integrated MCDM approaches

  • Jan 01, 2018
  • International Journal of Advanced Operations Management
  • Mohammad Asjad +1
  • Research Article
  • Citations11

Selection of optimal machining parameters using integrated MCDM approaches

  • Jan 01, 2018
  • International Journal of Advanced Operations Management
  • Mohammad Asjad +1
  • Research Article
  • Citations11

Investigation of surface roughness and MRR in drilling of Al2O3 particle and sisal fibre reinforced epoxy composites using TOPSIS based Taguchi method

  • Aug 01, 2018
  • IOP Conference Series: Materials Science and Engineering
  • M Kamaraj +2
  • Research Article
  • Citations14

Surface integrity optimization in high speed milling of AZ91 magnesium alloy using TOPSIS considering vibration signals

  • Nov 15, 2021
  • Materials Today: Proceedings
  • Vikas Marakini +3
  • Research Article
  • Citations19

Optimization of Turning Parameters of Machining Incoloy 800H Superalloy Using Cryogenically Treated Multilayer CVD-Coated Tool

  • Apr 25, 2018
  • Arabian Journal for Science and Engineering
  • A Palanisamy +2
  • Research Article
  • Citations58

Optimization of EDM process parameters for AlSiC- 20% SiC reinforced metal matrix composite with multi response using TOPSIS

  • Jan 01, 2017
  • Materials Today: Proceedings
  • Avijeet Satpathy +3
  • Research Article

Enhanced mechanical and machinability of AZ91D hybrid composites via TOPSIS and machine learning models

  • Jan 24, 2026
  • Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
  • Ravikumar Natarajan +3
  • Research Article
  • Citations2

Multi-Objective Optimization of the Turning Process using the Probability Method

  • Feb 02, 2025
  • Engineering, Technology & Applied Science Research
  • Tran Van Dua +4
  • Research Article
  • Citations14

Evaluation of entropy-coupled multi-criteria decision-making methods for enhancing machinability

  • Sep 21, 2024
  • Heliyon
  • Nafisa Anzum Sristi +2
  • Book Chapter

Improvement of Material Removal Rate (MRR) Through Ultrasonic Vibration Frequency in Machining Hardened Material

  • Jul 04, 2019
  • Azlan Ramli +2
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.