Predicting road flooding risk with crowdsourced reports and fine-grained traffic data

The evaluation of load-settlement behavior of piles is very crucial in meeting the serviceability criteria for pile analysis and design. The most reliable approach for estimating this behavior can be achieved by conducting pile load tests. However, due to the considerable expense and time requirement of such in-situ testing, the load-transfer methods have been used routinely in practice. In this paper, an alternative tree-based machine learning (ML) modeling is explored to predict the load-settlement behavior of axially loaded single piles from cone penetration test (CPT) data. Two variants of tree-based ML models, the random forest (RF) and gradient boosted tree (GBT), are developed in this study to estimate the load-settlement behavior of piles from CPT data (corrected cone tip resistance, qt, and sleeve friction, fs). A database of load-settlement curves of 64 static pile load tests and the corresponding CPT test data were compiled and used for the development of these ML models. The developed RF and GBT models are evaluated based on several statistical criteria. The load-settlement curves for six PLTs predicted using the developed RF and GBT models were compared with the measured data and the load-settlement curves predicted using the conventional load-transfer methods. The results demonstrated the great potential of tree-based ML (RF, GBT) models for predicting the load-settlement behavior of axially loaded piles from CPT data. The comparison clearly shows that the ML models outperformed the conventional load-transfer methods. Amongst the two ML models, the results show that the GBT model outperformed the RF model.

To predict the potential geographic distribution of Oncomelania hupensis in Yunnan Province using random forest (RF) and maximum entropy (MaxEnt) models, so as to provide insights into O. hupensis surveillance and control in Yunnan Province. The O. hupensis snail survey data in Yunnan Province from 2015 to 2016 were collected and converted into O. hupensis snail distribution site data. Data of 22 environmental variables in Yunnan Province were collected, including twelve climate variables (annual potential evapotranspiration, annual mean ground surface temperature, annual precipitation, annual mean air pressure, annual mean relative humidity, annual sunshine duration, annual mean air temperature, annual mean wind speed, ≥ 0 ℃ annual accumulated temperature, ≥ 10 ℃ annual accumulated temperature, aridity and index of moisture), eight geographical variables (normalized difference vegetation index, landform type, land use type, altitude, soil type, soil textureclay content, soil texture-sand content and soil texture-silt content) and two population and economic variables (gross domestic product and population). Variables were screened with Pearson correlation test and variance inflation factor (VIF) test. The RF and MaxEnt models and the ensemble model were created using the biomod2 package of the software R 4.2.1, and the potential distribution of O. hupensis snails after 2016 was predicted in Yunnan Province. The predictive effects of models were evaluated through cross-validation and independent tests, and the area under the receiver operating characteristic curve (AUC), true skill statistics (TSS) and Kappa statistics were used for model evaluation. In addition, the importance of environmental variables was analyzed, the contribution of environmental variables output by the models with AUC values of > 0.950 and TSS values of > 0.850 were selected for normalization processing, and the importance percentage of environmental variables was obtained to analyze the importance of environmental variables. Data of 148 O. hupensis snail distribution sites and 15 environmental variables were included in training sets of RF and MaxEnt models, and both RF and MaxEnt models had high predictive performance, with both mean AUC values of > 0.900 and all mean TSS values and Kappa values of > 0.800, and significant differences in the AUC (t = 19.862, P < 0.05), TSS (t = 10.140, P < 0.05) and Kappa values (t = 10.237, P < 0.05) between two models. The AUC, TSS and Kappa values of the ensemble model were 0.996, 0.954 and 0.920, respectively. Independent data verification showed that the AUC, TSS and Kappa values of the RF model and the ensemble model were all 1, which still showed high performance in unknown data modeling, and the MaxEnt model showed poor performance, with TSS and Kappa values of 0 for 24%(24/100) of the modeling results. The modeling results of 79 RF models, 38 MaxEnt models and their ensemble models with AUC values of > 0.950 and TSS values of > 0.850 were included in the evaluation of importance of environmental variables. The importance of annual sunshine duration (SSD) was 32.989%, 37.847% and 46.315% in the RF model, the MaxEnt model and their ensemble model, while the importance of annual mean relative humidity (RHU) was 30.947%, 15.921% and 28.121%, respectively. Important environment variables were concentrated in modeling results of the RF model, dispersed in modeling results of the MaxEnt model, and most concentrated in modeling results of the ensemble model. The potential distribution of O. hupensis snails after 2016 was predicted to be relatively concentrated in Yunnan Province by the RF model and relatively large by the MaxEnt model, and the distribution of O. hupensis snails predicted by the ensemble model was mostly the joint distribution of O. hupensis snails predicted by RF and MaxEnt models. Both RF and MaxEnt models are effective to predict the potential distribution of O. hupensis snails in Yunnan Province, which facilitates targeted O. hupensis snail control.

Comparative study of different machine learning models in landslide susceptibility assessment: A case study of Conghua District, Guangzhou, China

Photovoltaic (PV) technology is becoming more popular due to climate change because it allows for replacing fossil-fuel power generation to reduce greenhouse gas emissions. Consequently, many countries have been attempting to generate electricity through PV power plants over the last decade. Monitoring PV power plants through satellite imagery, machine learning models, and cloud-based computing systems that may ensure rapid and precise locating with current status on a regional basis are crucial for environmental impact assessment and policy formulation. The effect of fusion of the spectral, textural with different neighbor sizes, and topographic features that may improve machine learning accuracy has not been evaluated yet in PV power plants’ mapping. This study mapped PV power plants using a random forest (RF) model on the Google Earth Engine (GEE) platform. We combined textural features calculated from the Grey Level Co-occurrence Matrix (GLCM), reflectance, thermal spectral features, and Normalized Difference Vegetation Index (NDVI), Normalized Difference Built-up Index (NDBI), and Modified Normalized Difference Water Index (MNDWI) from Landsat-8 imagery and elevation, slope, and aspect from Shuttle Radar Topography Mission (SRTM) as input variables. We found that the textural features from GLCM prominent enhance the accuracy of the random forest model in identifying PV power plants where a neighbor size of 30 pixels showed the best model performance. The addition of texture features can improve model accuracy from a Kappa statistic of 0.904 ± 0.05 to 0.938 ± 0.04 and overall accuracy of 97.45 ± 0.14% to 98.32 ± 0.11%. The topographic and thermal features contribute a slight improvement in modeling. This study extends the knowledge of the effect of various variables in identifying PV power plants from remote sensing data. The texture characteristics of PV power plants at different spatial resolutions deserve attention. The findings of our study have great significance for collecting the geographic information of PV power plants and evaluating their environmental impact.

Machine learning approach to predict susceptible growth regions of Moringa peregrina (Forssk)

Remote sensing and GIS-based machine learning models for spatial gully erosion prediction: A case study of Rdat watershed in Sebou basin, Morocco

Assessing treatment switch among patients with multiple sclerosis: A machine learning approach

Eğitim, her birey ve bir bütün olarak toplum için ekonomik, sosyal ve kültürel gelişimin temelidir. Ülkemizde orta öğretim kurumlarına Milli Eğitim Bakanlığı tarafından yapılan lise giriş sınavı ile öğrenci kabul edilmektedir. Bu çalışmada, 2019 yılında Türkiye&#039;nin 81 ilinde lise giriş sınavına giren öğrencilerin başarı oranları makine öğrenimi regresyon ve beta regresyon modeli ile ele alınmıştır. Bu makale, boşanma oranı, gayri safi yurtiçi hasıla, okuma yazma bilmeyenlerin sayısı ve yüksek öğretim nüfusu sayısı gibi değişkenleri kullanarak öğrencilerin başarı oranlarını modellemeyi, tahmin etmeyi ve açıklamayı amaçlamaktadır. Başarı oranlarını tahmin etmek için destek vektörü regresyon, rastgele orman, karar ağacı ve beta regresyon modeli uygulanmıştır. En yüksek R2 değerine sahip iki modelin beta regresyon ve rastgele orman modelleri olduğu bulunmuştur. Beta regresyon ve rastgele orman modelinin tahmin hataları incelendiğinde, başarı oranlarını tahmin etmede rastgele orman modelinin beta regresyon modeline göre nispeten üstün olduğu görülmektedir. Beta regresyon modeli Çanakkale ilinin başarı oranlarının en iyi yordayıcısı iken, rastgele orman modeli Ankara&#039;nın başarı oranlarını iyi tahmin etmiştir. Ayrıca beta regresyon modelinde başarı oranları için anlamlı bulunan değişkenlerin rastgele orman modelinde de önemli olduğu görülmüştür. Öğrencilerin başarı oranlarını tahmin etmek için hem beta hem de rastgele orman modellerinin kullanılması önerilir.

Background Predicting the prognosis of patients with acute myocardial infarction (AMI) combined with diabetes mellitus (DM) is crucial due to high in-hospital mortality rates. This study aims to develop and validate a mortality risk prediction model for these patients by interpretable machine learning (ML) methods. Methods Data were sourced from the Medical Information Mart for Intensive Care IV (MIMIC-IV, version 2.2). Predictors were selected by Least absolute shrinkage and selection operator (LASSO) regression and checked for multicollinearity with Spearman’s correlation. Patients were randomly assigned to training and validation sets in an 8:2 ratio. Seven ML algorithms were used to construct models in the training set. Model performance was evaluated in the validation set using metrics such as area under the curve (AUC) with 95% confidence interval (CI), calibration curves, precision, recall, F1 score, accuracy, negative predictive value (NPV), and positive predictive value (PPV). The significance of differences in predictive performance among models was assessed utilising the permutation test, and 10-fold cross-validation further validated the model’s performance. SHapley Additive exPlanations (SHAP) and Local Interpretable Model-agnostic Explanations (LIME) were applied to interpret the models. Results The study included 2,828 patients with AMI combined with DM. Nineteen predictors were identified through LASSO regression and Spearman’s correlation. The Random Forest (RF) model was demonstrated the best performance, with an AUC of 0.823 (95% CI: 0.774–0.872), high precision (0.867), accuracy (0.873), and PPV (0.867). The RF model showed significant differences (p < 0.05) compared to the K-Nearest Neighbours and Decision Tree models. Calibration curves indicated that the RF model’s predicted risk aligned well with actual outcomes. 10-fold cross-validation confirmed the superior performance of RF model, with an average AUC of 0.828 (95% CI: 0.800–0.842). Significant Variables in RF model indicated that the top eight significant predictors were urine output, maximum anion gap, maximum urea nitrogen, age, minimum pH, maximum international normalised ratio (INR), mean respiratory rate, and mean systolic blood pressure. Conclusion This study demonstrates the potential of ML methods, particularly the RF model, in predicting in-hospital mortality risk for AMI patients with DM. The SHAP and LIME methods enhance the interpretability of ML models.

BackgroundLumbar drainage is widely used in the clinic; however, forecasting lumbar drainage-related meningitis (LDRM) is limited. We aimed to establish prediction models using supervised machine learning (ML) algorithms.MethodsWe utilized a cohort of 273 eligible lumbar drainage cases. Data were preprocessed and split into training and testing sets. Optimal hyper-parameters were archived by 10-fold cross-validation and grid search. The support vector machine (SVM), random forest (RF), and artificial neural network (ANN) were adopted for model training. The area under the operating characteristic curve (AUROC) and precision-recall curve (AUPRC), true positive ratio (TPR), true negative ratio (TNR), specificity, sensitivity, accuracy, and kappa coefficient were used for model evaluation. All trained models were internally validated. The importance of features was also analyzed.ResultsIn the training set, all the models had AUROC exceeding 0.8. SVM and the RF models had an AUPRC of more than 0.6, but the ANN model had an unexpectedly low AUPRC (0.380). The RF and ANN models revealed similar TPR, whereas the ANN model had a higher TNR and demonstrated better specificity, sensitivity, accuracy, and kappa efficiency. In the testing set, most performance indicators of established models decreased. However, the RF and AVM models maintained adequate AUROC (0.828 vs. 0.719) and AUPRC (0.413 vs. 0.520), and the RF model also had better TPR, specificity, sensitivity, accuracy, and kappa efficiency. Site leakage showed the most considerable mean decrease in accuracy.ConclusionsThe RF and SVM models could predict LDRM, in which the RF model owned the best performance, and site leakage was the most meaningful predictor.

Hypothyroidism (hypo means “under” or “below normal”) is the most common thyroid disease. It affects people worldwide irrespective of sex, age, race, and level of education, and wealth. The hypothyroid disease diagnosis in the early stage will help take precautions in preventing future complications. This work focuses on implementing a Machine Learning (ML)-based real-time hypothyroid disease classification framework. The hypothyroid dataset from UCI was employed to build the ML models. The K-Nearest Neighbor (KNN), Random Forest (RF), and Decision Tree (DT) ML models were implemented and achieved an accuracy of 98% for all models. Later the Min-Max Scaler data normalization technique was applied to improve the performance and achieved average accuracy of 99% for both RF and DT models. The hypothyroid dataset has imbalanced data. In such a case, F1-score is an important metric to evaluate the model performance. K-fold cross validation technique is applied to cross-validate the models. The average F1-score was found to be 0.94 for the RF model, whereas 0.92 for DT and 0.9 for KNN. This performance indicates RF model is performing well for predicting hypothyroidism and also outperforms the models reported in the literature.

BackgroundA considerable portion of patients with fever of unknown origin (FUO) present concomitant lymphadenopathy. Diseases within the spectrum of FUO accompanied by lymphadenopathy include lymphoma, infections, and rheumatic diseases. Particularly, lymphoma has emerged as the most prevalent etiology of FUO with associated lymphadenopathy. Distinguishing between benign and malignant lymph node lesions is a major challenge for physicians and an urgent clinical concern for patients. However, conventional imaging techniques, including PET/CT, often have difficulty accurately distinguishing between malignant and benign lymph node lesions. This study utilizes PET/CT radiomics to differentiate between lymphoma and benign lymph node lesions in patients with FUO, aiming to improve diagnostic accuracy.ResultsData were collected from 204 patients who underwent 18F-FDG PET/CT examinations for FUO, including 114 lymphoma patients and 90 patients with benign lymph node lesions. Patients were randomly divided into training and testing groups at a ratio of 7:3. A total of 15 effective features were obtained by the least absolute shrinkage and selection operator (LASSO) algorithm. Machine learning models were constructed using logistic regression (LR), support vector machine (SVM), random forest (RF), and k-nearest neighbors (KNN) algorithms. In the training group, the area under the curve (AUC) values for predicting lymphoma and benign cases by LR, SVM, RF, and KNN models were 0.936, 0.930, 0.998, and 0.938, respectively. There were statistically significant differences in AUC between the RF and other models (all P < 0.001). In the testing group, the AUC values for the four models were 0.860, 0.866, 0.915, and 0.891, respectively, with no statistically significant differences observed among them (all P > 0.05). The decision curve analysis (DCA) curves of the RF model outperformed those of the other three models in both the training and testing groups.ConclusionsPET/CT radiomics demonstrated promising performance in discriminating lymphoma from benign lymph node lesions in patients with FUO, with the RF model showing the best performance.

ObjectiveThis study aimed to develop and validate interpretable machine learning (ML) models based on multi-dimensional fusion data for predicting positive surgical margins (PSM) in robot-assisted radical prostatectomy (RARP).MethodsPatients who underwent RARP at our institution between January 2016 and July 2025 were enrolled. Demographic, clinical, biopsy pathology data, and MRI-derived anatomical features (measured using ITK-SNAP on axial, sagittal, and coronal planes) were collected. Feature selection was performed using intraobserver and interobserver correlation coefficients (ICCs), low-variance filtering, univariable logistic regression, Spearman’s correlation analysis, the least absolute shrinkage and selection operator (LASSO) algorithm, and the Boruta algorithm. Six ML models were constructed, with performance evaluated using area under the curve (AUC), calibration curves, and decision curve analyses (DCA) to identify the optimal model. Five-fold and ten-fold cross-validation were used to assess the optimal model’s generalizability, and its interpretability was evaluated via Shapley Additive exPlanations (SHAP) analysis.ResultsA total of 347 patients were included, comprising a training set (n=193, January 2016–December 2024), validation set (n=84, January 2016–December 2024), and test set (n=70, January 2025–July 2025). From 164 initial features, 7 key features were retained through a four-step screening. The Random Forest (RF) model outperformed other models, achieving AUCs of 0.99 (95% CI: 0.97–1.00) in the training set, 0.88 (95% CI: 0.80–0.95) in the validation set, and 0.97 (95% CI: 0.94–1.00) in the test set. Calibration curve and decision curve analyses confirmed its strong clinical utility. Five-fold cross-validation for the RF model showed fold-specific AUCs of 0.82–0.92, with a mean AUC of 0.87 (95% CI: 0.84–0.90). Ten-fold cross-validation showed fold-specific AUCs of 0.80–0.99, with a mean AUC of 0.88 (95% CI: 0.83–0.93). SHAP analysis revealed five novel spatial anatomical features (such as Sagittal plane-posterior spatial anatomical structure index, Coronal plane-Left anatomical structure interval) were negatively associated with PSM risk, while the number of positive biopsy cores and clinical tumor stage were positively associations.ConclusionsMulti-dimensional fusion data combined with ML models improves PSM prediction accuracy in RARP. The RF model, with excellent performance and interpretability, shows promise for preoperative PSM risk stratification, facilitates optimized clinical decision-making, and supports personalized treatment discussions during preoperative planning, but requires prospective and external validation before clinical implementation.

This study aimed to develop a machine learning model for accurately predicting postoperative VTE risk in these patients. The data of this study retrospectively collected the inpatients of cervical cancer in the Affiliated Cancer Hospital of Chongqing University from January 2020 to December 2023. We utilized 1,044 observations and six variables to develop seven machine learning (ML) models and selected the best-performing model for assessing postoperative venous thromboembolism (VTE) risk. The models were evaluated using ROC, PR, and DCA curves, and the prediction of the model's process was explained using SHAP values. Among 1,044 postoperative cervical cancer patients, 82 (7.85%) developed VTE. Seven machine learning algorithms were developed and evaluated, with the random forest (RF) model showing the best overall performance (AUC = 0.852, AUPR = 0.332). Compared with other models, including logistic regression (AUC = 0.767) and XGBoost (AUC = 0.836), the RF model demonstrated superior discrimination, calibration, and generalizability. Decision curve analysis confirmed that the RF model yielded the highest net clinical benefit across a wide range of threshold probabilities (5-80%). SHAP analysis revealed that D-dimer, neutrophil-to-lymphocyte ratio (NLR), and age were the most influential variables, indicating their substantial contributions to model prediction. Our study suggests that machine learning algorithms can be practical tools for postoperative VTE risk assessment and can learn from patient characteristics to provide personalized evaluations. The RF model outperformed the other six algorithms evaluated. We developed the final RF model as a user-friendly web tool for healthcare professionals.

The aim of this study is to build Machine Learning models to evaluate the effect of blast furnace slag (BFS) and waste tire rubber powder (WTRP) on the compressive strength of cement mortars. In order to develop these models, 12 different mixes with 288 specimens of the 2, 7, 28, and 90 days compressive strength experimental results of cement mortars containing BFS, WTRP and BFS+WTRP were used in training and testing by Random Forest, Ada Boost, SVM and Bayes classifier machine learning models, which implement standard cement tests. The machine learning models were trained with 288 data that acquired from experimental results. The models had four input parameters that cover the amount of Portland cement, BFS, WTRP and sample ages. Furthermore, it had one output parameter which is compressive strength of cement mortars. Experimental observations from compressive strength tests were compared with predictions of machine learning methods. In order to do predictive experimentation, we exploit R programming language and corresponding packages. During experimentation on the dataset, Random Forest, Ada Boost and SVM models have produced notable good outputs with higher coefficients of determination of R2, RMS and MAPE. Among the machine learning algorithms, Ada Boost presented the best R2, RMS and MAPE values, which are 0.9831, 5.2425 and 0.1105, respectively. As a result, in the model, the testing results indicated that experimental data can be estimated to a notable close extent by the model.