Review on Leaf diseases detection using Deep learning

Citrus fruit crops are among the world’s most important agricultural products, but pests and diseases impact their cultivation, resulting in yield and quality losses. Computer vision and machine learning have been widely used to detect and classify plant diseases over the last decade, allowing for early disease detection and improving agricultural production. This paper presented an automatic system for the early detection and classification of citrus plant diseases based on a deep learning (DL) model, which improved accuracy while decreasing computational complexity. The most recent transfer learning-based models were applied to the Citrus Plant Dataset to improve classification accuracy. Using transfer learning, this study successfully proposed a Convolutional Neural Network (CNN)-based pre-trained model (EfficientNetB3, ResNet50, MobiNetV2, and InceptionV3) for the identification and categorization of citrus plant diseases. To evaluate the architecture’s performance, this study discovered that transferring an EfficientNetb3 model resulted in the highest training, validating, and testing accuracies, which were 99.43%, 99.48%, and 99.58%, respectively. In identifying and categorizing citrus plant diseases, the proposed CNN model outperforms other cutting-edge CNN model architectures developed previously in the literature.

The "Leaf Disease Detection" system addresses the critical challenge of plant diseases in agriculture through the implementation of an automated solution leveraging deep learning techniques. In this comprehensive endeavor, convolutional neural networks (CNNs), specifically DenseNet-121, ResNet-50, VGG-16, and Inception V4, are fine-tuned for efficient and accurate identification of plant diseases. The project utilizes the Plant Village dataset, encompassing 54,305 images across 38 plant disease classes, to conduct a comparative analysis of model performance. DenseNet-121 emerged as the top-performing model, achieving an exceptional 99.81% classification accuracy, surpassing other state-of-the-art models. The system's methodology strategically employs transfer learning to overcome computational challenges associated with training deep CNN layers. This approach, coupled with the multi-class classification strategy, proves robust in handling diverse plant species and diseases within each class. The results highlight the superior efficiency of transfer learning in comparison to building models from scratch, showcasing the potential for real-world applications in agriculture. The system's success is attributed to the careful optimization of hyper parameters and the adoption of advanced deep learning techniques, offering a promising avenue for automated and accurate plant disease detection, with implications for improving agricultural practices, minimizing economic losses, and ensuring global food security.

In recent years, plant leaf diseases has become a widespread problem for which an accurate research and rapid application of deep learning in plant disease classification is required, tomato is also one of the most important plants and seeds which are used worldwide for cooking in either dried or fresh form, tomato are a great source of protein that offer many health benefits, but there are a lot of diseases associated with tomato leaf which hinder its production. Thus, an accurate classification of tomato leaf diseases is needed to solve the problem in the early stage. A deep learning approach is proposed to identify and classify leaf disease by using public dataset of leaf image and CNN model with the open source library TensorFlow. In this project, we proposed a method to classify tomato leaf disease and to find and describe the efficient network architecture (hyper parameters and optimization methods). Moreover, after applying each architecture separately, we compared their obtained results to find out the best architecture configuration for classifying tomato leaf diseases and their results. Furthermore, to satisfy the classification requirements, the model was trained using CNN architecture check if we could get faster training times, higher accuracy and easier retraining. Deep learning is a branch of artificial intelligence. In recent years, with the advantages of automatic learning and feature extraction, it has been widely concerned by academic and industrial circles. It has been widely used in image and video processing, voice processing, and natural language processing. At the same time, it has also become a research hotspot in the field of agricultural plant protection, such as plant disease recognition. The application of deep learning in plant disease recognition can avoid the disadvantages caused by artificial selection of disease spot features, make plant disease feature extraction more objective, and improve the research efficiency and technology transformation speed. This review provides the research progress of deep learning technology in the field of crop leaf disease identification in recent years. In this project, we present the current trends and challenges for the detection of plant leaf disease using deep learning and advanced imaging techniques. We hope that this project will be a valuable resource for researchers who study the detection of plant diseases. At the same time, we also discussed some of the current challenges and problems that need to be resolved.

<span id="docs-internal-guid-01580d49-7fff-6f2a-70d1-7893ec0a6e14"><span>Plant diseases are a major cause of destruction and death of most plants and especially trees. However, with the help of early detection, this issue can be solved and treated appropriately. A timely and accurate diagnosis is critical in maintaining the quality of crops. Recent innovations in the field of deep learning (DL), especially in convolutional neural networks (CNNs) have achieved great breakthroughs across different applications such as the classification of plant diseases. This study aims to evaluate scratch and pre-trained CNNs in the classification of tomato plant diseases by comparing some of the state-of-the-art architectures including densely connected convolutional network (Densenet) 120, residual network (ResNet) 101, ResNet 50, ReseNet 30, ResNet 18, squeezenet and Vgg.net. The comparison was then evaluated using a multiclass statistical analysis based on the F-Score, specificity, sensitivity, precision, and accuracy. The dataset used for the experiments was drawn from 9 classes of tomato diseases and a healthy class from PlantVillage. The findings show that the pretrained Densenet-120 performed excellently with 99.68% precision, 99.84% F-1 score, and 99.81% accuracy, which is higher compared to its non-trained based model showing the effectiveness of using a combination of a CNN model with fine-tuning adjustment in classifying crop diseases.</span></span>

All people have access to food thanks to agriculture, even in areas with rapid population expansion. In order to ensure that the entire population has access to food, early diagnosis of plant diseases is recommended. However, when crops are still maturing, it might be challenging to predict diseases. The goal of this paper is to inform farmers about the use of machine learning to recognize various pest species in various crop plants. Deep learning establishes a continuing, cutting-edge method for analysing images with significant potential and promising outcomes. DL has expanded into the field of agriculture after demonstrating its effectiveness in a number of applications. Here, we reviewed various research articles that used deep learning methods to address diverse research issues in tomato (Solanum lycopersicum) plants. We look at the study areas in tomato plants where deep learning, data preprocessing, transfer learning, and augmentation approaches are performed. studied dataset details, including the number of photos, classes, and train test to validation ratios that were employed. We also look at comparisons made across different deep learning architectures and analyse the results. The results demonstrated that deep learning techniques beat all other image processing methods, however how well DL works depended on the dataset employed.

Deep learning (also known as deep structured learning, hierarchical learning, or deep machine learning) is a branch of machine learning based on a set of algorithms that attempt to model high-level abstractions in data by using a deep graph with multiple processing layers, composed of multiple linear and nonlinear transformations. Deep learning has been characterized as a class of machine learning algorithms with the following characteristics [257]: • They use a cascade of many layers of nonlinear processing units for feature extraction and transformation. Each successive layer uses the output from the previous layer as input. The algorithms may be supervised or unsupervised and applications include pattern analysis (unsupervised) and classification (supervised). • They are based on the (unsupervised) learning of multiple levels of features or representations of the data. Higher-level features are derived from lower-level features to form a hierarchical representation. • They are part of the broader machine learning field of learning representations of data. • They learn multiple levels of representations that correspond to different levels of abstraction; the levels form a hierarchy of concepts. These definitions have in common: multiple layers of nonlinear processing units and the supervised or unsupervised learning of feature representations in each layer, with the layers forming a hierarchy from low-level to high-level features. Various deep learning architectures such as deep neural networks, convolutional deep neural networks, deep belief networks (DBN), and recurrent neural networks have been applied to fields like computer vision, automatic speech recognition, natural language processing, audio recognition, and bioinformatics where they have been shown to produce state-of-the-art results on various tasks. In this chapter we start in Section 7.1 with an introduction, giving a brief history of this field, the relevant literature, and its applications. Then we study some basic concepts of deep learning such as convolutional neural networks, recurrent neural networks, backpropagation algorithm, restricted Boltzmann machines, and deep learning networks in Section 7.2. Then we illustrate three examples for Apache Spark implementation for mobile big data (MBD), user moving pattern extraction, and combination with nonparametric Bayesian learning, respectively, in Sections 7.3 through 7.5. Finally, we have summary in Section 7.6.

Background: Plant diseases affect agricultural output, quality and profitability, making them serious obstacles for agriculture. It is essential to detect diseases early in order to reduce losses while retaining sustainable practices. Plant disease detection has benefited greatly from the use of computer vision and deep learning in recent years because of their outstanding precision and computing capability. Objective: In this paper, we intend to investigate the role of deep learning in computer vision for plant disease detection while looking into how these techniques address complex disease identification problems. A variety of deep learning architectures were reviewed, and the contribution of frameworks such as Tensorflow, Keras, Caffe and PyTorch to the researchers' model construction was studied as well. Additionally, the usage of open repositories such as PlantVillage and Kaggle along with the customized datasets were discussed. Methods: We gathered the most recent developments in deep learning techniques for leaf disease detection through a systematic literature review of research papers published over the past decade, using reputable academic databases like Scopus and Web of Science, following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) method for guidance. Results: This study finds that researchers consistently enhance existing deep learning architectures to improve prediction accuracy in plant disease detection, often by introducing novel architectures and employing transfer learning methods. Frameworks like TensorFlow, Keras, Caffe, and PyTorch are widely favored for their efficiency in development. Additionally, most studies opt for public datasets such as PlantVillage, Kaggle, and ImageNet, which offer an abundance of labelled data for training and testing deep learning models. Conclusion: While no singular ‘best' model emerges, the adaptability of deep learning and computer vision demonstrates the dynamic nature of plant disease recognition area, and this paper provides a comprehensive overview of deep learning's transformative impact on plant disease recognition by bringing together information from different studies. Keywords: Deep learning, Computer vision, Plant disease, Systematic literature review

The accurate recognition and early warning for plant diseases and pests are a prerequisite of intelligent prevention and control for plant diseases and pests. As a result of the phenotype similarity of the hazarded plant after plant diseases and pests occur, as well as the interference of the external environment, traditional deep learning models often face the overfitting problem in phenotype recognition of plant diseases and pests, which leads to not only the slow convergence speed of the network, but also low recognition accuracy. Motivated by the above problems, the present study proposes a deep learning model EResNet-support vector machine (SVM) to alleviate the overfitting for the recognition and classification of plant diseases and pests. First, the feature extraction capability of the model is improved by increasing feature extraction layers in the convolutional neural network. Second, the order-reduced modules are embedded and a sparsely activated function is introduced to reduce model complexity and alleviate overfitting. Finally, a classifier fused by SVM and fully connected layers are introduced to transforms the original non-linear classification problem into a linear classification problem in high-dimensional space to further alleviate the overfitting and improve the recognition accuracy of plant diseases and pests. The ablation experiments further demonstrate that the fused structure can effectively alleviate the overfitting and improve the recognition accuracy. The experimental recognition results for typical plant diseases and pests show that the proposed EResNet-SVM model has 99.30% test accuracy for eight conditions (seven plant diseases and one normal), which is 5.90% higher than the original ResNet18. Compared with the classic AlexNet, GoogLeNet, Xception, SqueezeNet and DenseNet201 models, the accuracy of the EResNet-SVM model has improved by 5.10%, 7%, 8.10%, 6.20% and 1.90%, respectively. The testing accuracy of the EResNet-SVM model for 6 insect pests is 100%, which is 3.90% higher than that of the original ResNet18 model. This research provides not only useful references for alleviating the overfitting problem in deep learning, but also a theoretical and technical support for the intelligent detection and control of plant diseases and pests. © 2024 Society of Chemical Industry.

Mango cultivation faces significant challenges from leaf diseases such as Gall Midge and Sooty Mould, which can reduce crop yield by up to 40% if not detected early. Traditional disease identification methods rely heavily on expert knowledge and laboratory analysis, which are time- consuming, expensive, and inaccessible to small-scale farmers. This study presents a comprehensive mobile-based solution for automated mango leaf disease detection using deep learning techniques deployed on mobile devices. The system employs a Convolutional Neural Network (CNN) optimized through quantization-aware training and deployed via TensorFlow Lite within a Flutter-based cross-platform mobile application. The dataset comprises 4,962 high-resolution images across three classes: Healthy, Gall Midge, and Sooty Mould, collected from agricultural research stations and field conditions.. The Flutter application enables farmers to capture leaf images through their smartphone cameras and receive immediate disease classification results with confidence scores, detailed disease information, and treatment recommendations. The system operates entirely offline, making it accessible in remote agricultural areas with limited internet connectivity. Results demonstrate that mobile-based deep learning can provide accurate, fast, and accessible plant disease detection, contributing to early intervention, reduced crop losses, and improved agricultural productivity for mango farmers globally. Keywords: Mango Leaf Disease Detection, TensorFlow Lite, Flutter Framework, Mobile Deep Learning, CNN Quantization, Agricultural Technology, Plant Disease Classification, On- Device Inference

With the rapid development of precision agriculture and smart agriculture, the need to build an automatic identification and detection system for diseases and insect pests is increasing. Using computers to correctly label plant diseases and insect pests is an important prerequisite for achieving accurate classification of plant diseases and insect pests and ensuring system performance. In order to improve the accuracy of computer classification of plant pests and diseases, this paper proposes an automatic pest identification method based on the Vision Transformer (ViT). In order to avoid training overfitting, the plant diseases and insect pests data sets are enhanced by methods such as Histogram Equalization, Laplacian, Gamma Transformation, CLAHE, Retinex-SSR, and Retinex-MSR. Then use the enhanced data set to train the constructed ViT neural network, so as to realize the automatic classification of plant diseases and insect pests. The simulation results show that the constructed ViT network has a test recognition accuracy rate of 96.71% on the plant disease and insect pest public data set Plant_Village, which is about 1.00% higher than the Plant disease and pest identification method based on traditional convolutional neural networks such as GoogleNet and EfficentNetV2.

Plant disease is an important factor affecting crop yield. With various types and complex conditions, plant diseases cause serious economic losses, as well as modern agriculture constraints. Hence, rapid, accurate, and early identification of crop diseases is of great significance. Recent developments in deep learning, especially convolutional neural network (CNN), have shown impressive performance in plant disease classification. However, most of the existing datasets for plant disease classification are a single background environment rather than a real field environment. In addition, the classification can only obtain the category of a single disease and fail to obtain the location of multiple different diseases, which limits the practical application. Therefore, the object detection method based on CNN can overcome these shortcomings and has broad application prospects. In this study, an annotated apple leaf disease dataset in a real field environment was first constructed to compensate for the lack of existing datasets. Moreover, the Faster R-CNN and YOLOv3 architectures were trained to detect apple leaf diseases in our dataset. Finally, comparative experiments were conducted and a variety of evaluation indicators were analyzed. The experimental results demonstrate that deep learning algorithms represented by YOLOv3 and Faster R-CNN are feasible for plant disease detection and have their own strong points and weaknesses.

- The Plant Disease Detection and Classification project is designed to help farmers identify crop diseases at an early stage using images of plant leaves. By applying advanced machine learning (ML) and deep learning (DL) techniques, this system aims to automatically detect and classify various plant diseases with high accuracy. Early identification of plant diseases plays a vital role in improving crop yield, reducing unnecessary pesticide usage, and encouraging sustainable farming practices. Once a disease is detected, the system not only identifies it but also provides a brief description and recommends appropriate prevention and treatment methods. To enhance performance, the project uses data augmentation and normalization techniques—helping the model handle variations in lighting, angles, and environmental conditions. The system is trained on a diverse dataset containing images of both healthy and diseased leaves from different plant species, categorized into 38 different classes. The project incorporates various machine learning algorithms such as Support Vector Machines (SVM), K-Nearest Neighbors (KNN), Decision Trees, and Random Forests, as well as a Convolutional Neural Network (CNN) for deep learning. Among these, CNNs have shown outstanding performance due to their ability to learn spatial features from images effectively. While existing research has shown promising results, real-world challenges such as varying image quality, lighting conditions, and background clutter still affect accuracy. This project aims to overcome these issues by training on large, diverse datasets and fine-tuning model parameters. Ultimately, this project hopes to empower farmers with an intelligent tool to monitor crop health, make informed decisions, and contribute to food security through precision agriculture. Keywords: Plant Disease Detection, Automated Disease Detection System, Machine Learning, Deep Learning, Data Augmentation, Data Normalization, Support Vector Machine, KNN Classifier, Convolutional Neural Network, Decision Trees, Random Forest

The increasing prevalence of plant diseases poses a significant threat to global cotton production, leading to substantial economic losses and reduced crop yield. Traditional manual disease detection methods are time-consuming, labour-intensive, and often inaccurate. To address this challenge, this research proposes an advanced deep learning-based approach for automated cotton plant disease detection using Convolutional Neural Networks (CNNs). The study evaluates multiple CNN architectures, including GoogleNet, VGG16, DenseNet201, ResNet50, and TLResnet152V2, to determine their effectiveness in identifying and classifying diseased cotton leaves. The proposed methodology leverages normalized and augmented datasets, utilizing data pre-processing, feature extraction, and transfer learning techniques to enhance model performance. Extensive experimental evaluations demonstrate that data augmentation significantly improves classification accuracy, enabling CNN models to generalize better across diverse disease conditions. Among the tested architectures, TLResnet152V2 achieved the highest accuracy (92.03%) and F1-score (0.8842), outperforming all other models, followed closely by ResNet50. These results highlight the superiority of deep residual learning in plant disease classification, ensuring robust feature extraction and precise detection. This studies also explores the combination of CNN-primarily based disorder detection into clever agriculture structures, allowing actual-time sickness classification via cell packages and IoT-based totally answers. The findings affirm that deep gaining knowledge of-pushed plant disorder detection can considerably enhance precision farming, reducing dependency on professional agronomists while improving early disorder intervention techniques. destiny studies will awareness on deploying light-weight CNN models for facet computing, integrating climate statistics for predictive disorder modelling, and exploring hybrid deep studying strategies for enhanced accuracy. The examine demonstrates that CNN-based automatic cotton plant disease detection is a transformative step closer to sustainable, AI-enabled smart agriculture, ensuring better productivity, decreased crop losses, and advanced food safety.

Plant leaf diseases pose significant challenges to agricultural productivity, necessitating early detection and intervention strategies. Recent research has increasingly turned to artificial intelligence (AI) techniques, particularly image processing and deep learning, to address these challenges. The paper provides a technical view of the application of Artificial Intelligence in plant leaf disease detection. Key aspects covered include datasets, image processing methodologies, deep learning algorithms, and evaluation metrics commonly utilized in this domain. An emphasis is placed on the important role of annotated datasets in the training of AI models, facilitating the development of accurate classification systems. Image processing techniques, encompassing tasks such as enhancement, segmentation, and feature extraction, are discussed for their role in preprocessing leaf images to extract salient features. Deep learning algorithms, notably convolutional neural networks (CNNs), are highlighted for their effectiveness in automatically learning discriminative features from input images and achieving high accuracy rates in disease classification tasks. The paper illuminates the significance of employing evaluation metrics such as accuracy, precision, recall, and F1 score as quantitative benchmarks to gauge the efficacy of model performance. It highlights the triumphs observed across diverse studies harnessing AI methodologies for the detection of plant leaf diseases, emphasizing their transformative capacity in reshaping agricultural management paradigms. Future research directions are outlined, including the exploration of transfer learning methods to capitalize on pre-trained models and the integration of additional sensing technologies like hyperspectral imaging and drones for enhanced disease detection capabilities. These advancements are poised to further refine the accuracy and efficiency of plant leaf disease detection systems, thereby offering substantial benefits to agriculture and food production sectors.

To identify novel advancements in plant diseases detection and classification systems employing Machine Learning (ML), Deep Learning (DL), and Transfer Learning (TL), this research compiled 111 peer-reviewed papers published between 2019 and early 2023. The literature was sourced from databases such as Scopus and Web of Science using keywords related to deep learning and leaf disease. A structured analysis of various plant disease classification models is presented through tables and graphics. This paper systematically reviews the model approaches employed, datasets utilized, countries involved, and the validation and evaluation methods applied in plant disease identification. Each algorithm is annotated with suitable processing techniques, such as image segmentation and feature extraction, along with standard experimental metrics, including the total number of training/testing datasets utilized, the quantity of disease images considered, and the classifier type employed. The findings of this study serve as a valuable resource for researchers seeking to identify specific plant diseases through a literature-based approach. Additionally, the implementation of mobile-based applications using the DL approach is expected to enhance agricultural productivity.