Secure Storage on Cloud using Hybrid Cryptography

The Consultative Committee for Space Data Systems (CCSDS) recommends AES algorithm as a cryptographic algorithm to maintain confidentiality and data security between spacecraft and ground systems. In implementation, there are several AES algorithm operating modes including Cipher-Block Chaining (CBC), Electronic Codebook (EBC), Cipher Feedback (CFB), Output Feedback (OFB), and counter mode (CTR). One of the operating modes of AES algorithm recommended by CCSDS is CTR because it has advantages in terms of efficiency of implementation and offers a high level of data security. LAPAN-A4 as the next generation of LAPAN satellites also uses CCSDS standard in terms of data exchange between satellites and ground stations including telemetry and telecommand (TTC) data and satellite payload data. In order to protect LAPAN-A4 satellite data, especially TTC data, in this paper AES algorithm was implemented in CTR operating mode on the FPGA which will then be implemented on LAPAN-A4 satellite onboard data handling (OBDH) as one of LAPAN-A4 satellite data security systems. To overcome the limited resource of FPGA, optimization is also done using basic iterative AES hardware reused method, which is to reuse hardware that has been designed n times for same operation for AES algorithm. From the results of implementation and optimization, efficiency of logic gates used is increasing almost a quarter less than the previous research.

The rapid The main problem in the misuse of data used in crime is the result of a lack of file security. This study proposes a data security method to protect document files using the Advanced Encryption Standard (AES) algorithm combined with the Vigenere Cipher. This research carried out 2 processes, namely the encryption process and the decryption process. The encryption process will be carried out by the AES algorithm and then encrypted again with the Vigenere Cipher algorithm. The experiments show that the proposed method can encrypt files properly, where there are changes in the value of the document file and the encrypted file cannot be opened and the description results do not cause changes to the original file. The results of this study are that the system is able to work properly so as to produce file encryption and decryption using the AES method combined with the Vigenere Cipher. In document files, the largest difference in encryption and decryption time is 8 seconds, while in image files the difference in encryption and decryption time is 17 seconds. This longest time difference is generated by large files.

This study discusses the effectiveness of using AES (Advanced Encryption Standard) and RC4 (Rivest Chipper 4) as digital data security algorithms to prevent and protect transaction data from irresponsible parties. This needs to be done because the development of sales transactions or other services has used digital technology a lot. This situation causes the need to secure digital data from existing transactions, so that transaction data can be stored safely. Transaction data security is carried out by changing data into ciphers or codes that are difficult to read using the AES (Advanced Encryption Standard) and RC4 (Rivest Cipher 4) algorithms. This research begins by collecting existing transaction data and then transforming it into ASCII code. The results of the transformation will be used to perform calculations using the AES algorithm. After completing the calculation process using the AES algorithm, then do the calculations using RC4. These results will be stored in the database so that the transaction data that has turned into these codes cannot be known by other parties. The combination of the AES and RC4 algorithms is carried out to strengthen data encryption because there are more and more rotation systems and double security is carried out so that digital data is not easily read and misused. With the presence of this research, it can be shown that the AES and RC4 algorithms are capable of encrypting existing transaction data with multiple levels of security.

E-commerce becomes an electronic media that uses a login system used by users. User data in the form of usernames and passwords is vulnerable to hacking. One technique to improve user security is the implementation of AES algorithms on login systems in E-Commerce applications. The purpose of this study is to apply the AES algorithm in the login system of e-commerce websites and analyze the improvement of information security for users after the implementation is carried out. The research method used is an experiment with the application of the use of the AES algorithm before and after. Therefore, the application of the AES algorithm on the login system of e-commerce websites can be used as a solution to improve user data security. Testing using Wireshark and Burpsuite tools. The results obtained are that AES successfully secures the username and password on the e-commerce login system .

Todays world is of cloud computing, cloud service provider (CSP) provides different resources and services to the user anytime anywhere over the internet. Due to this feature of cloud maintain security over cloud is complex. Cloud computing security issue are authentication of user, nonrepudiation, authority, confidentiality, privacy, availability, access control and checking the integrity of data. Here we have proposed the secure architecture for cloud which is going to map some cloud security issues that are authentication of user, confidentiality, privacy, access control and checking the integrity of data. For authentication of user system uses One Time Password (OTP), for data integrity check system uses modified SHA-2 hash function. This modified version of SHA-2 will provide better solution for PreImage attack and Collision attack and for encryption and decryption system uses standard Advanced Encryption Standards (AES) algorithm.

The meaning of security is to protect something important from not authorized peoples. Cryptography is one of the security systems. Many applications could be used in the security systems like military applications, email, banking, information technology of database. The proposed system uses advanced encryption standard(AES) with secure hash algorithms(SHA-1) to produce a strong ciphertext. Moreover, this paper make the combination of (SHA-1) which is a one way encryption, as a key with (AES) algorithm which is a two way encryption as a ciphering generator to obtain confidentiality and integrity, In this paper presented implementation of Advanced Encryption Standard (AES) and Secure Hash (SHA-1) Algorithm by the use of FPGA Hardware card, However implementation of the AES algorithm and SHA-1 using LABVIEW environment with MATLAB system generator to generate stream data to FPGA hardware target. The output of the hash function is used as an input key for AES in order to improve data security, From the algorithms result of AES and SHA-1 obtained in FPGA, the system obtained how it is simple in modeling hashing and AES algorithms, generating hash codes and plain texts in (small and capital letters), symbols and numbers. The FPGA card used in this system (Spartan 3AN)with frequency (50%), the complete system take (1,147)size from the available space of (11,776) and accuracy (90%),the system work properly.

In the rapid evolving digital landscape, the imperative to ensure data security has never been more crucial. This paper addresses the pressing challenges in data security by introducing a file encryption management system, leveraging a modified advanced encryption standard (AES) algorithm with reduced round iterations and bit permutation. This system aims to comprehensively secure various file types, providing a dependable solution for file exchange. Our findings reveal substantial improvements in both encryption and decryption processes using the reduced-round permutation-based AES (RRPBA). The adapted algorithm demonstrates a significant 38.8% acceleration in encryption time and a remarkable 44.86% improvement in decryption time, positioning it as a pivotal component for efficient file operations within the management system. Moreover, the throughput assessments showcase a remarkable 33.73% improvement in encryption and 23.72% in decryption, outperforming the original AES, emphasizing the algorithm's superior computational effectiveness, signaling positive implications for future high-performance applications. In conclusion, the study not only addresses critical security challenges but also presents a viable solution with tangible speed advantages for file encryption and decryption processes within digital file management systems.

Mobile ad hoc network (MANET) is a group of mobile nodes that communicates with each other without any supporting infrastructure. These networks have some unique features such as dynamic mobility, open nature, lack of infrastructure, limited physical security and they are vulnerable to several security threats. Malicious node can drop all or partial received packets instead of forwarding them to the next hop through the path. In order to find the malicious nodes, an initial transmission is made between the source and destination nodes. Using fuzzy rules, the trust value of each node is computed and it varies from 0 to 1. A common threshold value is set for each node and by using this threshold value, every node in the network can be identified as either a malicious node or a regular node. After identifying the malicious nodes, these nodes are eliminated by muting the power to off state. As the malicious nodes are eliminated between source and destination nodes, source node can select another trusted path to its destination
 node. For security and authentication of routing information, hybrid cryptography is employed, using advanced encryption standard (AES) and elliptic curve cryptography (ECC) algorithms. AES algorithm is used as symmetric algorithm to encrypt the routing information and ECC algorithm is used as asymmetric algorithm to encrypt the public key. During encryption, the original plain text is converted into cipher text with encrypted public key and similarly during decryption cipher text is converted into original plain text with decrypted private keys. So the proposed method involves both AES and ECC algorithms which provides security mechanism as efficient and sufficient one. The experimental simulations are carried for the proposed model using network simulator 2 (NS-2) for Throughput, Delay, Packet delivery ratio, Packet overhead and Packet drop.

An efficient AES implementation using FPGA with enhanced security features

The throughput of WPAN (Wireless Personal Area Network) based on Bluetooth was decided by the interference of Bluetooth piconets in the network. The interference was decided by the hamming correlation of Bluetooth FH (Frequency Hopping) selected sequence. In order to improve the WPAN throughput, the WPAN model and data packet collision model were built and the relations about WPAN throughput, the maximum hamming correlation of FH selected sequence, the numbers of Bluetooth piconets and the SNR of channel were analyzed. The functions of WPAN throughput were deduced. After analyzing the performance of Bluetooth FH selected sequence, the original algorithm was replaced by the AES (Advanced Encryption Standard) algorithm. The theoretical analysis proved that the AES FH sequences selected algorithm could improve the WPAN throughput. The simulation results proved the theoretical analysis. The test result with ARM926EJs SoC (System on Chip) + RF (Radio Frequency) chip nRF2401 and CSR's Bluecore4 Bluetooth module got the same conclusion. All of these could prove that the AES algorithm can improve the WPAN throughput efficiently.

Data encryption has become a vital need for protecting the user data in most of communication areas. Advanced Encryption Standard (AES) algorithm has become the optimum choice for various security services in numerous applications due to its reliability and flexibility. The AES algorithm faces two main challenges which included in both encryption/decryption speed, and the consumed implementation area. This paper presents an optimized implementation of the AES algorithm with respect to the consumed implementation area by combining both data and key expansion approaches. The optimized implementation of AES increases its applicability in the small sized devices such as mobile phones and smart cards. The experimental outcomes prove the superiority of the proposed optimization approach compared to the available approaches in the literature with acceptable frequency and throughput for low throughput applications.

With the rapid development of internet technology and the increasing popularity of e-commerce, data encryption technology plays a very important role in data security. Information security has two aspects: security protocol and cryptographic algorithm and the latter is the foundation and core technology of information security. Advanced Encryption Standard (AES) encryption algorithm is one of the most commonly used algorithms in symmetric encryption algorithms. Such algorithms face issues when used in the context of key management and security functions. This paper focuses on the systematic analysis of these issues and summarizes AES algorithm implementation, comprehensive application and algorithm comparison with other existing methods. To analyze the performance of the proposed algorithm and to make full use of the advantages of AES encryption algorithm, one needs to reduce round key and improve the key schedule, as well as organically integrate with RSA algorithm. Java language is used to implement the algorithm due to its large library, then to show the efficiency of the proposed method we compare different parameters, such as encryption/decryption speed, entropies and memory consumption...) with a classic algorithm. Based on the results of the comparison between AES and the hybrid AES algorithm, the proposed algorithm shows good performance and high security. It therefore can be used for key management and security functions, particularly for sharing sensitive files through insecure channel. This analysis provides a reference useful for selecting different encryption algorithms according to different business needs.

Cloud computing helps users to store and retrieve their data in the cloud online on an as-per-pay basis anytime, anywhere in the world. As a consequence, the security of data stored in the cloud serves as a key concern for cloud consumers due to ongoing hacking incidents in the cloud. Both cloud service providers (CSPs) and consumers face various attacks that pose a serious threat to both the organization and the user. Therefore, a robust intrusion detection system (IDS) needs to be configured to identify and avoid potential attacks in the cloud at an earlier stage. The state-of-the-art IDS system which used shallow machine learning techniques suffered from poor accuracy with a higher false alarm rate and higher response time. To overcome this problem, a hybrid semantic deep learning (HSDL) architecture is developed in this paper by integrating the long short-term memory (LSTM), convolutional neural network (CNN), and support vector machine (SVM) architectures. The semantic information present in the network traffic is identified using a semantic layer known as the Word2Vec embedding layer. The HSDL model classifies the intrusion present in the text along with its corresponding attack class. The normal text without any trace of intrusion is encrypted using an advanced encryption standard (AES) algorithm to enhance cloud storage security, and the optimal key with the largest key breaking time for the AES algorithm is selected using the crossover-based mine blast optimization algorithm (CMBA). The proposed HSDL scheme is evaluated and tested using two real-time intrusion detection benchmark datasets, namely NSL-KDD and UNSW-NB15. The proposed model achieves an accuracy of 99.98% for the NSL-KDD and 98.47% for the UNSW-NB15 dataset, respectively. The experimental and security analysis conducted proves the efficiency and robustness of the proposed scheme.

With the continuous development of Internet technology, cloud storage has been widely applied and developed. Users can store data through the network anytime, anywhere. However, the frequent occurrence of a series of cloud storage data security events show that cloud storage not only provides data storage services for users, but also poses huge threats and challenges to users' data security. Aiming at the problem of user data security in cloud storage environment, the system introduces multi-cloud storage system on the basis of the traditional single cloud storage system. The system uses Erasure Code to block the original data, and encrypts the data blocks using AES (Advanced Encryption Standard) encryption technology, then stores the encrypted data blocks in different cloud storages terminals. Thus, the hidden danger of data loss or leakage due to relying on a cloud service provider is eliminated, the existing security problems of cloud storage system are improved, and the security and reliability of the multi-cloud secure storage system are improved.

Arithmetic coding technique is very much effective and flexible and it is evident in most of the circumstances while on the other hand AES is advanced encryption standard process which deals with changeover and permutation of data for proper security. The paper presents the security and compression of data by Arithmetic coding with AES (Advanced Encryption Standard) algorithm. Basic research is to arithmetically encode the data first, followed by encryption by using AES algorithm and then transmits the code. At the receiving end the data is decrypted and decoded to produce the user data. The paper has an advantage of encoding/decoding and compression of data both at the same time. The input data size is of 128 bits or 256 bits in AES, so the idea is to compress the data before encryption by digital arithmetic coding. The arithmetic coding and Huffman coding are very much alike in their working as they both achieve the task of compression by plummeting the average number of bits required to represent each and every symbol.