SEGMENT CLASSIFICATION OF ECG DATA AND CONSTRUCTION OF SCATTER PLOTS USING PRINCIPAL COMPONENT ANALYSIS

A heart disease called cardiovascular diseases (CVD) is another leading cause for the death. There are several reasons that lead the CVD in human beings. The early detect of CVD helps to take necessary medical attentions to prevent the harms. The conventional techniques for CVD detection were manual and expensive which often delivers the inaccurate diagnosis. Since from the last decade the other inexpensive Computer Aided Diagnosis (CAD) based methods gained significant medical attentions. The CAD based techniques mainly based on raw Electro Cardiogram (ECG) signals of patient for the accurate and economical detection of CVD at early stage. In recent past, there are several CAD systems designed for CVD diagnosis utilizing raw ECG signals, however accuracy of CVD detection utilizing ECG bothered through several issues of research like QRS beats extraction, artefacts, efficient features extraction. This research paper present CVD novel framework, utilizing raw ECG signals and designed hybrid pre-processing algorithm for extracting artefacts and noise through raw ECG signal. Further designed simple and efficient dynamic thresholding based technique to extract the beats such as Q, R, S, and ST segment through pre-processing ECG signal. Third step perform the fusion of extracted beats and apply the feature extraction method called Normalized Higher Order Statistic (NHOS). The normalized HOS techniques asses the complexity among all the QRS based beats and delivers the more unique features for the accuracy enhancement. The final step is the classification by using five different classifiers for the CVD detection. The simulation results presented in this paper demonstrate that proposed framework achieved the significant accuracy improvement.

In the areas of biomedical and healthcare, electrocardiogram (ECG) signal analysis is one of the major aspects of research. The accuracy in the detection of subtle characteristic features in ECG is of great significance. This paper deals with an algorithm based on hybrid linearization and principal component analysis for ECG signal denoising and R-peak detection. The ECG data have been taken from the MIT-BIH Arrhythmia Database for performance evaluation. The signal is denoised by applying the hybrid linearization method, which is an arrangement of the extended Kalman filter along with discrete wavelet transform, and then principal component analysis is employed to detect R waves and the QRS complex. The reported work has been implemented in the MATLAB environment for 25 different ECG records yielding 99.90% sensitivity, 99.97% positive predictivity, and a detection error rate of 0.120%. The achieved performance outperforms the recent research done in the area of interest.

This paper investigates the application of the newly proposed Kronecker-based method for the reconstruction of compressively sensed electrocardiogram (ECG) signals. By applying the Kronecker-based method, ECG signal acquisition is done in smaller lengths. Collection of smaller length of ECG signals leads to fewer arithmetic operations during the compression phase. Instead of recovering individually in smaller lengths, recovery is done over several concatenated segments. This newly proposed recovery method improves the quality of the reconstructed signal when compared to the traditional recovery done without concatenation. Two random measurement matrices, namely the Gaussian and the Bernoulli matrices, are considered as sensing matrices in this study and the methodology is evaluated using 10 ECG signals acquired from the MIT arrhythmia database. The random Bernoulli matrix is found to provide better quality of recovered compressed ECG signal even with the traditional compressive recovery techniques. Recovery by the newly proposed Kroneckerbased method results in higher SNR in all the ECG signals when the compression ratio (CR) is 25% or 50% and when the CR is 75%, improvement is observed in majority of the ECG signals. Lower CRs provide better reconstruction than higher CRs. The Kronecker-based recovery method may be useful for wearable ECG devices.

Cardiovascular diseases remain a major cause of death in the world, and thus it is imperative to have correct and timely diagnoses of cardiac abnormalities. The direct interpretation of the electrocardiogram (ECG) signals is manual and is time consuming and prone to human error, especially when there is constant monitoring. The following paper is a review of a Temporal Convolutional Networks (TCN)-based real-time ECG anomaly detection framework using AI. The system reviewed has ECG signals obtained in the MIT-BIH Arrhythmia Database and applies noise reduction and heartbeat segmentation as preprocessing procedures to enhance the quality of the signal. It uses a powerful multi-feature extraction framework based on Fractional Discrete Cosine Transform (FrDCT), Radon Wavelet Transform (RWT) and Fractional Wavelet Transform (FrWT) to ensure that the ECG data is represented in a holistic manner. A Concrete Autoencoder (CAE) is used to reduce the dimensions by picking out the most significant features. TL-MobileNet-ED A new Transformer-based MobileNet Encoder-Decoder that incorporates Temporal Convolutional Networks (TL-MobileNet-ED) is proposed to perform efficient and accurate anomaly classification. Experimental findings indicate that the classification accuracy is 98.43 with a matching high precision, recall and F1-score as compared to current machine learning and deep learning benchmarks. The paper summarizes the methodology, presents the analysis of the experimental findings, and explains the general implications of the framework to real-time intelligent cardiac monitoring. Keywords: Electrocardiogram (ECG), ECG Anomaly Detection, Artificial Intelligence (AI), Deep Learning, Temporal Convolutional Networks (TCN), MobileNet, Transformer Learning, Feature Extraction, Concrete Autoencoder (CAE), Real-Time Monitoring.

Electrocardiogram (ECG) signals are significantly distorted during recording by muscle artifact (MA), causing signal frequency overlap and making it difficult to interpret ECG data correctly. Deep learning (DL) methods for signal processing have shown promising results. However, there is a significant necessity in building proper DL models with appropriate datasets. We propose an enhanced hybrid deep learning framework called HRGB-Net based on residual neural network (ResNet), global channel attention block (GCAB), and bidirectional-long-short-term memory (Bi-LSTM) blocks for filtering the MA noise from ECG by using three distinctive MIT-BIH real-time datasets from the PhysioNet repository by creating suitable datasets for training. We use both raw ECG data and short-time Fourier-transformed (STFT) ECG data for comparative analysis with three neural network models: a convolutional neural Network (CNN), a fully connected neural network (FCNN), and a regression-based LSTM (Reg-LSTM-DNN) model to assess the proposed model. The signal-to-noise ratio (SNR) of noisy ECG signals is varied from - 7dB to 2dB to analyze the mean square error (MSE) and correlation coefficient (CC) performances after the denoising process. Our proposed method utilizes the regression ability to remove MA noise and generate a clean ECG signal with improved values of these signal parameters. The STFT-trained and tested ECG data shows better results than the raw ECG data for efficiently eliminating the MA with a 98.82% correlation coefficient and optimal MSE value of 0.053068. The results prove our proposed HRGB-Net model's remarkable ability to outperform the neural network models and other standard techniques.

Coronary artery disease (CAD) is one of the most common causes of heart ailments; many patients with CAD do not exhibit initial symptoms. An electrocardiogram (ECG) is a diagnostic tool widely used to capture the abnormal activity of the heart and help with diagnoses. Assessing ECG signals may be challenging and time-consuming. Identifying abnormal ECG morphologies, especially in low amplitude curves, may be prone to error. Hence, a system that can automatically detect and assess the ECG and treadmill test ECG (TMT-ECG) signals will be helpful to the medical industry in detecting CAD. In the present work, we developed an intelligent system that can predict CAD, based on ECG and TMT signals more accurately than any other system developed thus far. The distinct convolutional neural network (CNN) architecture deals with single-lead and multi-lead (12-lead) ECG and TMT-ECG data effectively. While most artificial intelligence-based systems rely on the universal dataset, the current work used clinical lab data collected from a renowned hospital in the neighborhood. ECG and TMT-ECG graphs of normal and CAD patients were collected in the form of scanned reports. One-dimensional ECG data with all possible features were extracted from the scanned report with the help of a modified image processing method. This feature extraction procedure was integrated with the optimized architecture of the CNN model leading to a novel prediction system for CAD. The automated computer-assisted system helps in the detection and medication of CAD with a high prediction accuracy of 99%.

Heart disease is still a heavy hitter on the list of leading causes of death around the globe, so getting ahead of the game with early and accurate predictions is crucial for effective treatment. Traditional diagnostic systems often put all their eggs in one basket, relying solely on clinical data or electrocardiogram (ECG) signals. This one-track approach can really throw a wrench in the works, limiting their predictive power. To tackle this head-on, we suggest a Hybrid Deep Learning Framework for Heart Disease Prediction Using Multi-Modal Clinical and ECG Data, which weaves together cutting-edge neural architectures, attention mechanisms, and ensemble strategies to boost performance and clarity.The framework gets the ball rolling by preprocessing UCI Cleveland clinical features with a bit of normalization and encoding, while ECG signals are put through the wringer with noise removal, segmentation, and scaling. Clinical data are shaped using machine learning classifiers and ANN, while ECG features are pulled together with CNN, BiLSTM, and Transformer layers to snag local, temporal, and contextual insights. A Graph Neural Network (GNN) weaves together the threads of clinical and ECG features, while a cross-attention fusion module dances to the rhythm of dynamically aligning and prioritizing the key features from both modalities. Predictions are cooked up using a stacked ensemble classifier, and model interpretability is kept in the clear through SHAP values, attention heatmaps, and graph attention visualization.The experimental evaluation reveals that the proposed method takes the cake, leaving the baseline models in the dust. Our framework hit the nail on the head with a whopping 94.8% accuracy, 93.5% precision, 95.1% recall, and 94.3% F1-score, leaving traditional machine learning in the dust at a mere 86.5%, and unimodal deep learning methods like CNN-BiLSTM and Transformer trailing behind at 89.7% and 90.4%, respectively. Talk about raising the bar!To wrap it all up, the suggested hybrid method hits the nail on the head by blending structured clinical data with ECG signals, providing top-notch predictive accuracy and clarity that’s second to none. This positions it as a strong contender for practical clinical decision support and the early detection of cardiovascular disease. Keywords: Heart Disease Prediction, Hybrid Deep Learning, Multi-Modal Fusion, ECG Signals, Cross-Attention, Graph Neural Network, Explainable AI,

Applications based on electrocardiogram (ECG) signal feature extraction and classification are of major importance to the autodiagnosis of heart diseases. Most studies on ECG classification methods have targeted only 1- or 2-lead ECG signals. This limitation results from the unavailability of real clinical 12-lead ECG data, which would help train the classification models. In this study, we propose a new tensor-based scheme, which is motivated by the lack of effective feature extraction methods for direct tensor data input. In this scheme, an ECG signal is represented by third-order tensors in the spatial-spectral-temporal domain after using short-time Fourier transform on the raw ECG data. To overcome the limitations of tensor rank one discriminant analysis (TR1DA) inherited from linear discriminant analysis, we introduced a generalized tensor rank one discriminant analysis (GTR1DA). This approach involves considering the distribution of the data points near the classification boundary to calculate better projection tensors. The experimental results showed that the proposed method achieves greater classification accuracy than other vector- and tensor-based methods. Finally, GTR1DA features a better convergence property than the original TR1DA.

Electrocardiogram (ECG) is one of the monitoring methodology for the identification of arrhythmia disease. The conventional methodologies of arrhythmia identification are based on morphological features or certain transformation technique. These conventional techniques are partially successful in arrhythmia identification, because it treats heart as a linear structure. In this paper, ECG based arrhythmia identification is assessed by employing MIT-BIH arrhythmia dataset. The proposed approach contains two major steps: feature extraction and classification. Initially, a combination of non-linear and linear feature extraction is carried-out using Principal Component Analysis (PCA), Kernel Independent Component Analysis (KICA) and Higher Order Spectrum (HOS) for achieving optimal feature subsets. The linear experiments on ECG data achieves high performance in noise free data and the non-linear experiments distinguish the ECG data more effectively, extract hidden information and also helps to attain better performance under noisy conditions. After finding the feature information, a binary classifier Support Vector Machine (SVM) is employed for classifying the normality and abnormality of arrhythmia. In experimental analysis, the proposed approach distinguishes the normality and abnormality of arrhythmia ECG signals in terms of specificity, sensitivity and accuracy. Experimental outcome shows that the proposed approach improved accuracy in arrhythmia detection up to 0.5-1% compared to the existing methods: neural network and SVM based radial basis function.

In this article, the effect of motion artifact (MA) contamination on derivative based R-peak detection algorithm over single channel Electrocardiogram (ECG) signal is proposed. In addition, using the correlations between various frequency subbands, a new discrete wavelet transform-based MA removal approach from ECG signal was implemented. Initially, the single lead clean ECG signal was manually contaminated with standard noise signal, and features of clean ECG beats were extracted using Principal Component Analysis. Now using these features, the noise signal was eliminated beat-wise, by analyzing the frequency subband, which were affected by the MA contamination. Finally, a comparison of R-peak detection in clean, noisy, and denoised ECG signals was carried out. The noise signal was obtained from the ‘em’ signal available in MITBIH Noise Stress Test Database, and the experimental result was performed on 35 MITBIH arrythmia records. It was observed that the overall improvement of signal to noise ratio was 7.85 dB with an input SNR of 0 dB. An average sensitivity and positive predictivity of the three types of signals mentioned above, were obtained as 99.45 and 99.13, 96.55 and 87.47, 98.93, 97.94, respectively. A comparative study with previously published work ensured overall better performance of the proposed article.

Due to the high sampling rate, the recorded Electrocardiograms (ECG) data are huge. For storing and transmitting ECG data, wide spaces and more bandwidth are therefore needed. The ECG data are also very important to preprocessing and compress so that it is distributed and processed with less bandwidth and less space effectively. This manuscript is aimed at creating an effective ECG compression method. The reported ECG data are processed first in the pre-processing unit (ProUnit) in this method. In this unit, ECG data have been standardized and segmented. The resulting ECG data would then be sent to the Compression Unit (CompUnit). The unit consists of an algorithm for lossy compression (LosyComp), with a lossless algorithm for compression (LossComp). The randomness ECG data is transformed into high randomness data by the failure compression algorithm. The data's high redundancy is then used with the LosyComp algorithm to reach a high compression ratio (CR) with no degradation. The LossComp algorithms recommended in this manuscript are the Discrete Cosine Transform (DCT) and Discrete Wavelet Transform (DWT). LossComp algorithms such as Arithmetic Encoding (Arithm) and Run Length Encoding (RLE) are also suggested. To evaluate the proposed method, we measure the Compression Time (CompTime), and Reconstruction Time (RecTime) (T), RMSE and CR. Simulation results suggest the highest output in compression ratio and in complexity by adding RLE after the DCT algorithm. The simulation findings indicate that the inclusion of RLE following the DCT algorithm increases performance in terms of CR and complexity. With CR = 55% with RMSE = 0:14 and above 94% with RMSE = 0:2, DCT as a LossComp algorithm was utilized initially, followed by RLE as a LossComp algorithm.

Electrocardiogram (ECG) signals consist of data containing measurements of electrical activity in the heartbeats. These signals include relevant information used to detect abnormalities such as arrhythmia. In this study, a recognition system is proposed for detection and classification of heartbeats in ECG signals. Heartbeats in the ECG data were detected by using the wavelet transform (WT) method and these beats are segmented with determined periods. For obtaining distinctive features from the beats, multi-resolution WT is applied to these segmented signals, and wavelet coefficients are obtained from different frequency levels. Feature vectors are generated on these coefficients by using various statistical methods. The proposed recognition system is trained on feature vectors by using the Online Sequential Extreme Learning Machine (OSELM) classifier during the learning phase to automatically recognize the signals. Five different beat types were obtained from the MIT-BIH arrhythmia dataset. The multi-class dataset that includes five classes and the binary-class dataset that includes two classes were created among these beat types. Performance tests of the proposed wavelet-based-OSELM (W-OSELM) method were realized with these two datasets. The proposed recognition system provided 97.29% correct beat detection rate from raw ECG signals. The classification accuracy is 99.44% for the binary-class dataset and 98.51% for the multi-class dataset. Furthermore, the proposed classifier has shown very fast recognition performance on ECG signals.

A QRS detection method is proposed based on the principal component analysis (PCA) and the combined wavelet entropy for 12-lead electrocardiogram (ECG) signals. Firstly, the base line wander and the high frequency interference are removed for ECG signals. The PCA method is employed to reduce the dimension of filtered signals. Then, the quasi-period sorting method is proposed to reorder principal components (PCs), which may help the following combined wavelet entropy based method detecting the QRS complex in the lower sorted PCs easily. The proposed method is evaluated against the standard St. Petersburg institute of cardiological technics 12-lead arrhythmia database with other two different QRS detection methods for the single-lead ECG signal and two-lead ECG signals respectively. Experimental results show that the proposed method gives the best overall performance. It achieves an average detection rate of 99.980%, a sensitivity of 99.997%, and a positive prediction of 99.987%.

Due to the capacity of processing signal with low energy consumption, compressive sensing (CS) has been widely used in wearable health monitoring system for arrhythmia classification of electrocardiogram (ECG) signals. However, most existing works focus on compressive sensing reconstruction, in other words, the ECG signals must be reconstructed before use. Hence, these methods have high computational complexity. In this paper, the authors propose a cardiac arrhythmia classification scheme that performs classification task directly in the compressed domain, skipping the reconstruction stage. The proposed scheme first employs the Pan–Tompkins algorithm to preprocess the ECG signals, including denoising and QRS detection, and then compresses the ECG signals by CS to obtain the compressive measurements. The features are extracted directly from these measurements based on principal component analysis (PCA), and are used to classify the ECG signals into different types by the proposed semi-supervised learning algorithm based on support vector machine (SVM). Extensive simulations have been performed to validate the effectiveness of the proposed scheme. Experimental results have shown that the proposed scheme achieves an average accuracy of [Formula: see text] at a sensing rate of 0.7, compared to an accuracy of [Formula: see text] for noncompressive ECG data.

It is evident that biological signals of each subject (e.g., electrocardiogram signal) carry his/her unique signature; consequently, several attempts have been made to extract subject-dependent features from these signals with application to human verification. Despite numerous efforts to characterize electrocardiogram (ECG) signals and provide promising results for low population of subjects, the performance of state-of-the-art methods mostly fail in the presence of noise or arrhythmia. This paper presented an efficient and fast-to-compute ECG feature by applying empirical mode decomposition (EMD) to ECG signals, and then, instantaneous frequency, instantaneous phase, amplitude, and entropy features were extracted from the analytical form of the last EMD component. Finally, the k-nearest neighbor (kNN) classifier was utilized to classify the individuals’ features. The proposed method was compared to the conventional features such as fiducial points, correlation, wavelet coefficients, and principal component analysis (PCA). These methods were all applied to ECG signals of 34 healthy subjects derived from the Physikalisch-Technische Bundesanstalt (PTB) database. The results implied the effectiveness of the proposed method, providing 95% verification accuracy, which was not the best among the competitors but provided much lower dimensional feature space compared to the top-rank counterparts.