Spatially Scalable HEVC for Layered Division Multiplexing in Broadcast

The Advanced Television System Committee (ATSC) is currently developing the next-generation U.S. Digital Terrestrial Television (DTT) standard, known as ATSC 3.0. Two disruptive technologies for the physical layer are being evaluated, Layer Division Multiplexing (LDM) and Time Frequency Slicing (TFS). LDM consist in the transmission of a signal composed of two independent signals (layers) which are superimposed together at different power levels. These two layer can be configured with the desired robustness and capacity. LDM enables the efficient provision of services addressed to mobile and fixed reception in a more efficient way than the classical Frequency Division Multiplexing (FDM) and Time Division Multiplexing (TDM) since full bandwidth and transmission time are used in both layers. However, practical operation is restricted due to several implementation constraints such as the use of common parameters and transmitter blocks for both layers (e.g. a common time interleaver). The use of TFS allows for an improved frequency diversity by the distribution of the service data across multiple Radio Frequency (RF) channels instead of using a single RF channel. The paper investigates the potential gains provided by the increased frequency diversity with TFS in conjunction with LDM.

<p>Advanced Television Systems Committee (ATSC) 3.0, the new generation digital terrestrial television standard, has been designed for facing the new challenges of the future broadcasting systems. ATSC 3.0 has been built using the most recent cutting-edge technologies. Layered division multiplexing (LDM) is one of the major components of the new system baseline. LDM provides a tool to make flexible use of the spectrum for delivering simultaneous services to stationary and mobile services. This paper presents the performance evaluation of ATSC 3.0 core services in mobile scenarios using LDM. Simulation results are presented to analyze the influence of different LDM ensemble configuration modes for mobile reception. The simulation results have been also confirmed by laboratory tests under different channel models. The signal to noise ratio threshold values confirm the excellent behavior of ATSC 3.0 and LDM in mobile and portable scenarios.</p>

In this paper, we present an efficient transmission method of multiple broadcasting services using layered division multiplexing (LDM) and scalable high efficiency video coding (SHVC) based on the next generation terrestrial digital broadcasting standard, advanced television systems committee 3.0. In a two-layer LDM system, each layer forms a physical layer pipe that carries base layer and enhancement layer video streams of SHVC, respectively. This combination of physical and presentation layers technologies can maximize channel utilization when multiple broadcasting services are delivered in a single radio frequency channel with different robustness and reception conditions. An intensive performance analysis is provided when the proposed combination of LDM and SHVC is compared with other approaches, such as time division multiplexing and/or high efficiency video coding simulcast broadcasting. Several performance measurements are also introduced, such as constant data rate measurement and constant quality measurement, which are used to evaluate the performance of video codecs in conjunction with different physical layer system parameters. A prototype hardware system with LDM and SHVC capable of selecting different parameter combinations is tested in the laboratory and in real field environments to verify the performance and feasibility of the proposed LDM and SHVC combination. Results show that the proposed LDM and SHVC combination provides significant gains on video service quality as well as reception robustness.

"(c) 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.")

Advanced Television Systems Committee (ATSC) 3.0 standard does not support the combined structure of layered division multiplexing (LDM) and multiple-input multiple-output (MIMO). Recently, previous works have evaluated the theoretical performance of LDM plus MIMO structure for enhanced system capacity. However, the practical performance for the structure has not been investigated yet over the realistic channels. This paper presents the practical performance of the layered MIMO broadcasting system evaluated by a working prototype. To this end, the ATSC 3.0-centric prototype transmitter and receiver are implemented. Based on the real hardware solutions, the laboratory-measured transmission performance is analyzed with respect to the crosstalk power within the MIMO channel, i.e., cross-polarization discrimination (XPD).

The most recent standard for broadcast services, Advanced Television System Committee—Third Generation (ATSC 3.0), has adopted co-located multi-antenna schemes and Layered Division Multiplexing (LDM) in order to increase the capacity and reliability compared to former Digital Terrestrial Television (DTT) systems. ATSC 3.0 has adopted both technologies separately, but no combination of them is planned yet. Compared to baseline LDM case, use of several antennas allows for diverse parametrization for each layer. This paper analyzes the potential combination of co-located Multiple-Input–Multiple-Output (MIMO) schemes with LDM. A trade-off analysis between complexity constraints and performance benefits is evaluated.

In ATSC 3.0 physical layer standard, a layered division multiplexing (LDM) scheme has newly accepted as one of the multiplexing schemes in order to improve the reception performance when multiple broadcasting contents are simultaneously delivered through a single RF channel. This paper presents comparison results of LDM and time division multiplexing (TDM) schemes under fixed reception environments, and analyzes the performance gain of LDM over TDM. From the field test results, it was confirmed that the LDM gain in the theoretical analysis is still maintained in the actual field.

The next generation digital TV (DTV) broadcast, namely Advanced Television System Committee (ATSC) 3.0, relies on substantial single frequency networks (SFN), each of which requires a studio to transmitter link (STL) to transmit data from the broadcast gateway (BG), leading to significant construction costs. Therefore, the wireless in-band distribution link (IDL) technology is proposed, which uses layered-division multiplexing (LDM) to transmit the STL data via wireless links from the BG to the SFN transmitters within the same spectrum as the broadcast services. In this paper, we propose the time synchronization and signal detection algorithm for wireless IDL systems with both unicast and broadcast signals. We introduce two multiplexing schemes, N-LDM and 3-LDM, and demonstrate their superiority over traditional frequency division multiplexing (FDM). To overcome the challenge of multi-access interference and synchronization errors caused by multipath, we develop a unique word (UW) design algorithm for transmitted signals and a double threshold correlation detection algorithm (DTCDA) that outperforms traditional ones. We employ a second threshold to enhance detection performance at low signal-to-noise ratios, and utilizes successive interference cancellation (SIC) to mitigate multiple-access interference. More importantly, our approach requires no knowledge of the unicast user number or channel state information. Simulation results validate the effectiveness of the proposed scheme.

This paper presents Layered Division Multiplexing (LDM), a technology that may be used to provide a flexible multi-layer system transmission by means of spectrum overlay. This technology can be used to simultaneously deliver multiple program streams with different characteristics and robustness for different services (mobile TV, HDTV and UHDTV) in one RF channel. — In Layer Division Multiplex (LDM) the signal to be transmitted consists of a number of different independent signals superimposed together at different injection levels to form a multi-layer signal. Each layer can have its own characteristics. The top layer is the most robust one, which has a negative Signal to Noise Ratio (SNR) system threshold value, and can be used for robust mobile service. The lower layer(s) can be used to provide fixed high data rate services, such as multiple High Definition Television (HDTV) and Ultra High Definition Television (UHDTV). For example, DVB-T2, or an alternative design of a high data rate transmission system can be used for the second layer. The upper layer signal can be a separate program, or be used for delivering supplementary bit rate to be combined with the lower layer signal to provide additional features or achieve higher quality of service (e.g., scalable video coding and placing audio on upper layer for extra robustness).

Layer-division multiplexing (LDM) system has developed with significant improvement in spectrum efficiency and service diversity. LDM technology, that superposes multiple signals with different transmit powers, has been adopted by ATSC 3.0 to deliver robust high-definition services. However, due to the high mobility of devices, the wide signal coverage, and the uneven geographical channel condition, there exists under-utilized energy and significant potential of enhancing communication capacity in the LDM system. In this paper, we employ reconfigurable intelligent surface (RIS) to improve the reception quality in the LDM system, especially the SINR performance of the terminals in the edge area. We formulate a problem of maximizing the minimum SINR among all the terminals by jointly optimizing the power control and pairing mechanism, which is a Mixed-integer Nonlinear Programming (MINLP) problem. To solve it, we use the convex-concave procedure (CCCP). We further explore the high-mobility scenario with the limited channel state information (CSI) and the missing knowledge of detailed prediction of terminals’ mobility. We use Brownian Motion to model the possible variation of the terminals’ positions in the high mobility scenario to guarantee the successful reception probability. The analysis shows the RIS can bring obvious SINR gain to the LDM system, and the mobility modification could greatly help improve the successful reception probability.

Single frequency network (SFN) enables efficient use of spectrum by allocating the same frequency among multiple transmitters. In order to efficiently design and manage the SFN, the Advanced Television Systems Committee (ATSC) 3.0 physical layer standard has adopted transmitter identification (TxID) technology which allows to measure the individual and/or whole network channel response, such as power and time delay of the broadcast signal from transmitters. Since TxID is embedded into the host ATSC 3.0 frame as radio frequency (RF) watermark, it is transparent to legacy ATSC 3.0 receivers and only a specially designed TxID analyzer is able to detect it. This paper presents new TxID detection methods that improve the detection performance of ATSC 3.0 TxID signal by resolving the problems and limitation of the conventional TxID detection method. The superiorities of the proposed detection methods are verified through computer simulation, laboratory test, and field trial.

Recently advanced time sharing scheme which is characterized as Variable Coding and Modulation (VCM) in satellite broadcasting system was adopted as a countermeasure for heavy rain fading in order to improve link availability in DVB-S2x (Digital Video Broadcasting — Satellite 2nd Generation eXtention) standard. Furthermore, we propose Layer Division Multiplexing (LDM) scheme to satellite broadcasting system for higher spectral efficient transmission and compare it with VCM.

An integrated satellite and aerial network (ISAN) is considered a promising candidate to provide seamless connectivity for future wireless communication systems. In this paper, we propose a multi-objective based robust beamforming (BF) scheme for an ISAN to support heterogeneous services with high flexibility, where the satellite network serves various heterogeneous satellite terminals through multicast non-orthogonal multiple access (MC-NOMA), while the aerial network offers services to many internet of things devices using layered division multiplexing (LDM). Specifically, we first formulate a multi-objective optimization problem (MOOP) to achieve a good trade-off between sum rate maximization and total transmit power minimization. To tackle this mathematically intractable problem, we exploit the weighted Tchebycheff approach to transform the MOOP into a single-objective problem. Since only the angular information based channel state information is available, we exploit the angular discretization method and sequential convex approximation to design a robust BF algorithm to obtain the Pareto optimal solutions. Finally, simulation results demonstrated that our proposed scheme can achieve a optimal trade-off between multiple performance metrics with high spectrum and energy efficiency, so as to support heterogeneous services in the ISAN and fill the gap of only single type of serivce in the existing ISAN works.

This article describes the next‐generation terrestrial broadcast transmission system developed by the Advanced Television Systems Committee (ATSC) known as “ATSC 3.0.” The goals of ATSC 3.0 are to improve the television viewing experience with higher audio and video quality, compression efficiency, robust transmission for reception on both fixed and mobile devices, and more accessibility, personalization, and interactivity. ATSC is also addressing changing consumer behavior and preferences, providing TV content on a wide variety of devices. Furthermore, ATSC is working to add value to the broadcast service platform, extending its reach and adding new business models – all without the restriction of backward compatibility with the legacy system.

.MNO/3D HDTV & OPQ2RS TATSC (Advanced Television Systems Committee) [2] UVW1AXYZ[ Q2\R]>^_R`V. ATSC [2]aSbATSC [1]XY3cd3QR], U>e QfghiOj ,TOV (Threshold of Visibility)O klf g^>L[R`V. mQn A, fg om ^_R`V.AbstractIn this paper, we propose a frame structure for modified ATSC transmission systems which is used for a terrestrial 3D HDTV broadcasting. The modified ATSC transmission systems [2] see the potential of increasing a transmission capacity at reasonable TOV (Threshold of Visibility) by modifying channel codes of conventional ATSC systems and varying modulations. We use PN symbols (Pseudorandom Noise) in a guard interval which is used for avoiding the ISI (Inter Symbol Interference) to estimate and compensate the time-varying multi path channel effectively with a maximum transmission payload. With PN symbols in the guard interval, a CIR (Channel Impulse Response) in a time domain can be estimated and a compensation in a frequency domain can be achieved for the accurate channel estimation and compensation. The prosed frame structure is applied to the modified ATSC systems and computer simulations are performed for SER (Symbol Error Rate) performances in TU (Typical Urban)-6 Channel.Keyword: Terrestial 3D HDTV broadcasting, Modified ATSC system, Frame structure™šMN