User Authentication from Mouse Movement Data Using SVM Classifier

This study investigated the effect of a new approach, the support vector machine, as a classifier tool to identify the weeds in corn fields at early growth stage. Image segmentation was done by transforming original color images to gray level images according to the statistical values of red, green, blue components. The Gray Level Co-occurrence Matrix (GLCM) and statistical properties of the histogram from the gray level images were further used to obtain the texture features of the weeds and corn seedlings. These texture features were used in the classification procedure. Principle component analysis was used to select the texture features according to their better contributions to reduce space dimensions. A Support Vector Machine (SVM) classifier was employed to recognize the weeds and the corn seedlings. The results indicated that the SVM classifiers with different feature selections could identify successfully weed-corn with a higher accuracy ranged from 92.31 to 100%. A comparison study of the recognition capabilities of SVM and back-propagation (BP) neural-network classifier using the same data set was conducted. It was found that the SVM classifier provided the best recognition performance with an accuracy of 100%, which exceeded the accuracy of 80% given by the BP classifier. Key words: Corn seedling, weeds, texture, support vector machine, recognize.

The problem with development of the support vector machine (SVM) classifiers using modified particle swarm optimization (PSO) algorithm and their ensembles has been considered. Solving this problem would allow fulfilling the high-precision data classification, especially Big Data classification, with the acceptable time expenditures. The modified PSO algorithm conducts a simultaneous search of the type of kernel functions, the parameters of the kernel function and the value of the regularization parameter for the SVM classifier. The idea of particles' «regeneration» served as the basis for the modified PSO algorithm. In the implementation of this algorithm, some particles change the type of their kernel function to the one which corresponds to the particle with the best value of the classification accuracy. The offered PSO algorithm allows reducing the time expenditures for the developed SVM classifiers, which is very important for Big Data classification problem. In most cases such SVM classifier provides the high quality of data classification. In exceptional cases the SVM ensembles based on the decorrelation maximization algorithm for the different strategies of the decision-making on the data classification and the majority vote rule can be used. Also, the two-level SVM classifier has been offered. This classifier works as the group of the SVM classifiers at the first level and as the SVM classifier on the base of the modified PSO algorithm at the second level. The results of experimental studies confirm the efficiency of the offered approaches for Big Data classification.

In order to improve the performance of Support Vector Machine (SVM) classifier for imbalanced data, this paper proposes dynamic cost-sensitive SVM classifier based on chaos particle swarm optimization (CPDC_SVM). Firstly, this paper introduces dynamic cost-sensitive thought to SVM classifier, and gives the method for structuring dynamic cost and cost-sensitive SVM model. Secondly, we propose the evaluation methodology performance for classifier, and adopts decimal base to code the particles. At last, chaos thought is introduced in particle swarm optimization algorithm, and the Algorithm of the dynamic cost-sensitive SVM classifier is given, which improves convergent speed and accuracy of particle swarm optimization, and can optimize dynamic cost-sensitive SVM well, so CPDC_SVM adds effectively the convergence speed and accuracy for the particle swarm optimization algorithm. Experimental results show CPDC_SVM has higher precision than traditional SVM classifier, and dynamic cost and chaos particle swarm optimization can improve the performance for classifier.

A boosted SVM classifier trained by incremental learning and decremental unlearning approach

BackgroundThis study aimed to screen the feature modules and characteristic genes related to ulcerative colitis (UC) and construct a support vector machine (SVM) classifier to distinguish UC patients.MethodsFour datasets that contained UC and control samples were obtained from the Gene Expression Omnibus database. Differentially expressed genes (DEGs) with consistency were screened via the MetaDE method. The weighted gene coexpression network (WGCNA) was used to distinguish significant modules based on the four datasets. The protein–protein interaction network was established based on intersection genes. Enrichment analysis of Gene Ontology (GO) biological processes (BPs) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment were established based on DAVID. An SVM combined with recursive feature elimination was also applied to construct a disease classifier for the disease diagnosis of UC patients. The efficacy of the SVM classifier was evaluated through receiver operating characteristic curves.ResultsTwelve highly preserved modules were obtained using the WGCNA, and 2009 DEGs with significant consistency were selected using the MetaDE method. Sixteen significantly related GO BPs and 12 KEGG pathways were obtained, such as cytokine-cytokine receptor interaction, cell adhesion molecules, and leukocyte transendothelial migration. Subsequently, 41 genes were used to construct an SVM classifier, such as CXCL1, CCR2, IL1B, and IL1A. The area under the curve (AUC) was 0.999 in the training dataset, whereas the AUC was 0.886, 0.790, and 0.819 in the validation set (GSE65114, GSE37283, and GSE36807, respectively).ConclusionsAn SVM classifier based on feature genes might correctly identify healthy people or UC patients.

Human identification is essential for proper functioning of society. Human identification through multimodal biometrics is becoming an emerging trend, and one of the reasons is to improve recognition accuracy. Unimodal biometric systems are affected by various problemssuch as noisy sensor data,non-universality, lack of individuality, lack of invariant representation and susceptibility to circumvention.A unimodal system has limited accuracy. Hence, Multimodal biometric systems by combining more than one biometric feature in different levels are proposed in order to enhance the performance of the system. A supervisor module combines the different opinions or decisions delivered by each subsystem and then make a final decision. In this paper, a multimodal biometrics authentication is proposed by combining face, iris and finger features. Biometric features are extracted by Local Derivative Ternary Pattern (LDTP) in Contourlet domain and an extensive evaluation of LDTP is done using Support Vector Machine and Nearest Neighborhood Classifier. The experimental evaluations are performed on a public dataset demonstrating the accuracy of the proposed system compared with the existing systems. It is observed that, the combination of face, fingerprint and iris gives better performance in terms of accuracy, False Acceptance Rate, False Rejection Rate with minimum computation time.

An improved SVM classifier based on double chains quantum genetic algorithm and its application in analogue circuit diagnosis

Among all biometric technologies, iris recognition is the most accurate and high confidence authentication system. Due to the limitations in PCA-based system, modified principal component analysis (PCA)-based feature extraction is proposed in iris recognition system. In the proposed system, features are extracted using Gaussian kernel PCA (GKPCA) and classified using support vector machine (SVM). GKPCA and SVM algorithms are evaluated using CASIA V3 iris database. The performances are compared with the existing PCA-based system. The proposed system achieves 96.67% of accuracy for 256 features using GKPCA linear SVM. False acceptance rate (FAR) and false rejection rate (FRR) are 0 and 3 respectively for linear SVM. The results show that the proposed system performs accurate localisation of patterns even in non-ideal conditions.

We perceive the digital watermark detection as classification problem in image processing. We classify watermarked images as positive class whilst unwatermarked images as negative class. Support Vector Machine (SVM) is used as classifier of the watermarked and unwatermarked digital images. Two watermarking schemes i.e. Cox's spread spectrum (SS) and Single Value Decomposition (SVD) are used to embed watermark into digital images. These algorithms are selected based on their different level of robustness to Stirmark attacks. The payload of the watermark used for both algorithms is consistent at certain number of bits. SVM is trained with both the watermarked and unwatermarked images. Receiver Operating Characteristics (ROC) graphs are plotted to assess the statistical detection behavior of both the correlation detector and SVM classifier. We found that straight forward application of SVM leads to generalization problem. We suggest remedies to preprocess the training data in order to achieve substantially better performance from SVM classifier than those resulting from the straightforward application of SVM. Both watermarked and unwatermarked images are attacked under Stirmark and are then tested with the correlation detectors and SVM classifier. A comparison of the ROC of the correlation detectors and SVM classifier is performed to assess the accuracy of SVM classifier relative to correlation detectors. We found that SVM classifier has higher robustness to Stirmark attacks.

This chapter aims to enhance the security of textual passwords by adding a new layer that involves an individual's typing rhythm without requiring additional devices. It discusses authentication methods and develops a textual password authentication system, which takes advantage of the fact that every user has a distinct way of typing. Twenty participants, including novice and expert users, assessed the proposed system. The measuring metrics used were the False Acceptance Rate (FAR) and False Rejection Rate (FRR). The flight time and typing rhythm were the biometric identification template. The results indicated low false rejection and acceptance rates, with the initial session registering 0.0 FRR and 0.1 FAR. Two weeks later, the second session recorded 0.25 FRR and 0.0 FAR. Using this model, users do not need to select a complex password they might forget. Instead, they can utilize a good rhythm different from their natural typing rhythm, making it challenging to guess.

Performance analysis of SAR filtering techniques using SVM and Wishart Classifier

Determining optimal bead central angle by applying machine learning to wire arc additive manufacturing (WAAM)

In this Letter, the authors present a unified framework for fall event detection and classification using the cumulants extracted from the acceleration (ACC) signals acquired using a single waist-mounted triaxial accelerometer. The main objective of this Letter is to find suitable representative cumulants and classifiers in effectively detecting and classifying different types of fall and non-fall events. It was discovered that the first level of the proposed hierarchical decision tree algorithm implements fall detection using fifth-order cumulants and support vector machine (SVM) classifier. In the second level, the fall event classification algorithm uses the fifth-order cumulants and SVM. Finally, human activity classification is performed using the second-order cumulants and SVM. The detection and classification results are compared with those of the decision tree, naive Bayes, multilayer perceptron and SVM classifiers with different types of time-domain features including the second-, third-, fourth- and fifth-order cumulants and the signal magnitude vector and signal magnitude area. The experimental results demonstrate that the second- and fifth-order cumulant features and SVM classifier can achieve optimal detection and classification rates of above 95%, as well as the lowest false alarm rate of 1.03%.

Failure of power transformer is very complex, so that it is difficult to use the mathematical model to describe their faults. In this study, an intelligent diagnostic method based on ant colony-support vector machine (AC-SVM) approach is presented for fault diagnosis of power transformer. The AC-SVM selects kernel function parameter and soft margin constant C penalty parameter of support vector machine (SVM) classifier. The performance of the AC-SVM system proposed in this study is evaluated by cases in China. The test results show that this AC-SVM model is effective to detect failure of power transformer.

"This paper explores the application of neural networks in multimodal biometric authentication systems, emphasizing the integration of multiple biometric modalities to enhance security, accuracy, and robustness against various attacks. Traditional authentication methods, such as passwords and single-modal biometrics, often suffer from vulnerabilities, including spoofing, environmental factors, and data breaches. To address these challenges, multimodal authentication systems combine several biometric traits, such as facial recognition, fingerprint scanning, voice recognition, and keystroke dynamics, to achieve higher reliability and resistance to security threats. The study provides an overview of public datasets used for training neural network-based biometric authentication models, including VoxCeleb, RAVDESS, MOBIO, and SDUMLA-HMT. These datasets contain diverse biometric information necessary for developing robust multimodal authentication systems. The paper evaluates the effectiveness of existing approaches using key performance metrics such as accuracy, false acceptance rate (FAR), false rejection rate (FRR), and area under the curve (AUC). Additionally, specialized metrics are considered, including failure to enroll rate (FTE), failure to acquire rate (FTA), and template stability (TS), which are crucial for real-world applications. The role of neural networks in multimodal biometric authentication is analyzed by examining state-of-the-art architectures, including convolutional neural networks (CNNs) and deep learning-based feature fusion methods. Various fusion levels—feature-level, score-level, and decision-level—are discussed to determine the optimal integration strategy for improving authentication performance. The results indicate that multimodal systems significantly outperform unimodal authentication methods by reducing vulnerability to spoofing and environmental variations. Experimental findings suggest that integrating multiple biometric traits enhances the system’s adaptability to dynamic conditions, reducing both false acceptance and false rejection rates. Despite these advantages, several challenges remain, including computational complexity, data privacy concerns, and the need for real-time processing capabilities. Future research should focus on optimizing multimodal fusion techniques, improving generalization across different datasets, and enhancing the security of biometric templates against adversarial attacks. Additionally, developing lightweight neural network architectures suitable for mobile and embedded systems is essential for the practical deployment of multimodal authentication technologies"