Weighted Combined Water Level Prediction Based on Nonlinear Programming Genetic Algorithm

Dengue hemorrhagic fever (DHF) is one of the most widespread and deadly diseases in several parts of Indonesia. An accurate forecast-based model is required to reduce the incidence rate of this disease. Time-series methods such as autoregressive integrated moving average (ARIMA) models are used in epidemiology as statistical tools to study and forecast DHF and other infectious diseases. The present study attempted to forecast the monthly confirmed DHF cases via a time-series approach. The ARIMA, seasonal ARIMA (SARIMA), and long short-term memory (LSTM) models were compared to select the most accurate forecasting method for the deadly disease. The data were obtained from the Surabaya Health Office covering January 2014 to December 2016. The data were partitioned into the training and testing sets. The best forecasting model was selected based on the lowest values of accuracy metrics such as the root mean square error (RMSE), mean absolute error (MAE), and mean absolute percentage error (MAPE). The findings demonstrated that the SARIMA (2,1,1) (1,0,0) model was able to forecast the DHF outbreaks in Surabaya City compared to the ARIMA (2,1,1) and LSTM models. We further forecasted the DHF cases for 12 month horizons starting from January 2017 to December 2017 using the SARIMA (2,1,1) (1,0,0), ARIMA (2,1,1), and LSTM models. The results revealed that the SARIMA (2,1,1) (1,0,0) model outperformed the ARIMA (2,1,1) and LSTM models based on the goodness-of-fit measure. The results showed significant seasonal outbreaks of DHF, particularly from March to September. The highest cases observed in May suggested a significant seasonal correlation between DHF and air temperature. This research is the first attempt to analyze the time-series model for DHF cases in Surabaya City and forecast future outbreaks. The findings could help policymakers and public health specialists develop efficient public health strategies to detect and control the disease, especially in the early phases of outbreaks.

Abstract: This research is driven by the challenges faced by Universitas Lancang Kuning (UNILAK) in attracting applicants amidst intense competition, especially after the government's policy opened independent pathways to State Universities (PTN) from 2022-2023, which impacted private university applicant numbers. To address this and support strategic planning, this study aims to predict the trend of prospective students applying to all study programs at UNILAK for the period 2025-2027. Two time series models were employed: ARIMA (AutoRegressive Integrated Moving Average) and LSTM (Long Short-Term Memory). Applicant data from 2019 to 2024 was used to build the model. The Augmented Dickey-Fuller (ADF) test confirmed the data's stationarity with a p-value of 0.0. ACF and PACF analyses determined the ARIMA parameters as p=1, d=1, q=1. The LSTM model was trained to capture more complex data patterns. ARIMA predictions for 2025, 2026, and 2027 are 3298.66, 3362.33, and 3371.30, respectively. LSTM predictions for the same years are 3335.64, 3476.52, and 3518.42. Evaluation using Root Mean Squared Error (RMSE) showed ARIMA (RMSE=588.72) to be more accurate than LSTM (RMSE=653.96). Nevertheless, LSTM provided a more optimistic prediction. This study concludes that ARIMA is better suited for short-term planning, while LSTM can be used for more ambitious long-term strategies. Keywords: arima; LSTM; applicants; prediction; university Abstrak: Penelitian ini didorong oleh tantangan Universitas Lancang Kuning (UNILAK) dalam menarik pendaftar di tengah persaingan ketat, khususnya setelah kebijakan pemerintah membuka jalur mandiri ke Perguruan Tinggi Negeri (PTN) sejak 2022-2023, yang menyebabkan penurunan jumlah pendaftar di universitas swasta. Untuk mendukung perencanaan strategis, studi ini bertujuan memprediksi tren jumlah calon mahasiswa yang mendaftar ke seluruh program studi di UNILAK untuk periode 2025-2027.Dua model deret waktu digunakan: ARIMA (AutoRegressive Integrated Moving Average) dan LSTM (Long Short-Term Memory). Data jumlah pendaftar dari 2019 hingga 2024 digunakan untuk membangun model. Uji Augmented Dickey-Fuller (ADF) menunjukkan data stasioner dengan p-value 0,0. Analisis ACF dan PACF menentukan parameter ARIMA sebagai p=1, d=1, q=1. Model LSTM dilatih untuk menangkap pola data yang lebih kompleks.Prediksi ARIMA untuk 2025, 2026, dan 2027 adalah 3298.66, 3362.33, dan 3371.30. Prediksi LSTM untuk tahun yang sama adalah 3335.64, 3476.52, dan 3518.42. Evaluasi menggunakan Root Mean Squared Error (RMSE) menunjukkan ARIMA (RMSE=588.72) lebih akurat daripada LSTM (RMSE=653.96). Meskipun demikian, LSTM memberikan prediksi yang lebih optimis. Studi ini menyimpulkan ARIMA lebih cocok untuk perencanaan jangka pendek, sementara LSTM dapat digunakan untuk strategi jangka panjang yang ambisius. Kata kunci: arima; LSTM; pendaftar; prediksi; universitas

Traffic safety has been thought of as a basic feature of transportation, recent developments in civil aviation have emphasized the need for risk identification and safety prediction. This study aims to increase en-route flight safety through the development of prediction models for flight conflicts. Firstly, flight conflicts time series and traffic parameters are extracted from historical ADS-B data. In the second step, a Long Short-Term Memory (LSTM) model is trained to make a one-step-ahead prediction on the flight conflict time series. The results show that the LSTM model has the greatest prediction effect (MAE 0.3901) with comparison to other models. Based on that, we add traffic parameters (volume, density, velocity) into the LSTM model as new input variables and issue a comprehensive analysis of the relative predictive power of traffic parameters. The accuracy of prediction model is validated with a mean error of less than 3%. Based on the improvements of model performance brought by traffic parameters, LSTM models with a single traffic parameter are proposed for further discussion. The results illustrate that volume is the most important factor in promoting prediction accuracy and density has an advantage of improvement in the aspect of model stability.

Abstract. The information available on the internet nowadays is diverse and moves very quickly. Information is becoming easier to obtain by the general public with the numerous online media outlets, including news portals that provide up-to-date information insights. Various news portals earn revenue from advertising using pay-per-click methods that encourage article writers to use clickbait techniques to attract visitors. However, the negative effects of clickbait include a decrease in journalism quality and the spread of hoaxes. This problem can be prevented by using text classification to classify clickbait in news titles. One method that can be used for text classification is a neural network. Artificial neural networks use algorithms that can independently adjust input coefficient weights. This makes this algorithm highly effective for modeling non-linear statistical data. The artificial neural network algorithm, especially the Long Short-Term Memory (LSTM), has been widely used in various natural language processing fields with satisfying results, including text classification. To improve the performance of the neural network model, adjustments can be made to the model's hyperparameters. Hyperparameters are parameters that cannot be obtained through data and must be defined before the training process. In this research, the Long Short-Term Memory (LSTM) model was used in clickbait classification in news titles. Sixteen neural network models were trained with different hyperparameter configurations for each model. Hyperparameter tuning was carried out using the random search algorithm. The dataset used was the CLICK-ID dataset published by William & Sari, 2020[1], with a total of 15,000 annotated data. The research results show that the developed LSTM model has a validation accuracy of 0.8030, higher than William & Sari's research, and a validation loss of 0.4876. Using this model, researchers were able to classify clickbait in news titles with fairly good accuracy. Purpose: The study was to develop and evaluate a LSTM model with hyperparameter tuning for clickbait classification on news headlines. The thesis also aims to compare the performance of simple LSTM and bidirectional LSTM for this task. Methods: This study uses CLICK-ID dataset and applies different text preprocessing techniques. The dataset later was used to build and train 16 LSTM models with different hyperparameters and evaluates them using validation accuracy and loss. This study uses random search for hyperparameter tuning. Result: The results of the study show that the best model for clickbait classification on news headlines is a bidirectional LSTM model with one layer, 64 units, 0.2 dropout rate, and 0.001 learning rate. This model achieves a validation accuracy of 0.8030 and a validation loss of 0.4876. The results also show that hyperparameter tuning using random search can improve the performance of the LSTM models by avoiding zero probabilities and finding the optimal values for the hyperparameters. Novelty: This study compares and analyzes the different preprocessing methods on text and the different configurations of the models to find the best model for clickbait classification on news headlines. The study also uses hyperparameter tuning to tune the model into the best model and finding the optimal values for the hyperparameters.

An accurate electrical Short-term Load Forecasting (STLF) is an eminent factor in the power generation, electrical load dispatching and energy planning for the power supply companies, specifically in developing countries. This paper proposes a novel temporal feature selection-based Long Short-term Memory (LSTM) model developed by the combination of standard Artificial Neural Network (ANN) layer and LSTM for electrical short term load forecasting. The LSTM model has excellent capability of predicting the stochastic nature of an hour ahead electrical loads. The standard ANN layer consisting 11 neurons is used as an input to LSTM cells. Such a combination of ANN layer with LSTM was never proposed before. The proposed model accommodates variations in weather as well as temporal inputs like humidity, holidays, and date-time features in the hourly load data of the power supply company situated in Johor, Malaysia. This paper gives the insights of hyper parameter tuning to capture the more generalized electrical load patterns in the dataset without compromising the time complexity of the proposed model. The proposed approach was compared with five existing approaches, namely: ANN, LSTM model 1, LSTM model 2, LSTM model 3 and Convolutional Neural Network-LSTM (CNN-LSTM) using hourly load dataset of Johor. The experimental results demonstrate that the proposed approach outperformed the existing approaches in terms of root mean square error, mean absolute percentage error and Diebold-Mariano statistical inference test within 95% confidence interval.

The effective integration of photovoltaic (PV) systems into the grid which facilitates better planning and resource allocation depends on accurate day-ahead solar power forecasts. This paper proposes a Long Short-Term Memory (LSTM) model for forecasting solar power generation one day in advance with the algorithm inspired by Ant Colony Optimization (ACO). A year's worth of real-time data for a 4.5 kW PV system is used to train and test the model with input characteristics including temperature, PV power production and solar irradiation. Over the course of three seasons—summer, winter, and monsoon—the performance of the ACO-optimized LSTM model is contrasted with that of a simple LSTM model and an LSTM model enhanced by particle swarm optimization (PSO). This encompasses metrics like R-squared (R²) values, Mean Absolute Error (MAE) and Root Mean Square Error (RMSE). The PSO-optimized LSTM model (MAE of 0.31 kW, RMSE of 0.38 kW and R² of 0.88) and the baseline LSTM model (MAE of 0.35 kW, RMSE of 0.42 kW and R² of 0.85) couldn't match the ACO-optimized LSTM model's summertime MAE of 0.27 kW, RMSE of 0.33 kW and R² of 0.92. Similar trends also surfaced throughout the monsoon and winter seasons, with the ACO-optimized model consistently outperforming the others. In the winter, for instance, it obtained an R² of 0.93, an RMSE of 0.26 kW and an MAE of 0.22 kW. With regard to hyper parameter optimization and overall performance, these findings demonstrate the ACO-optimized LSTM model's superiority over the baseline and PSO-optimized LSTM models highlighting its improved prediction precision for all seasons. The effectiveness of ACO in bolstering solar power forecast models is confirmed by this study and provides a solid basis for deep learning model improvement in practical PV applications.

Many countries around the globe, including Tanzania, are investing in renewable energy, partly because of the need to increase electric power generation and meet the ever-increasing electricity demands, and partly because of the need to combat global climate change caused by carbon emissions from fossil fuel-based electricity production. Kishapu Solar Project, located in Kishapu District, Shinyanga Region, Tanzania, is one of the renewable energy projects with a planned generation of 150 MW of electric power once completed, using solar photovoltaic technology. Accurate forecasting of solar radiation is important in managing and maintaining solar energy plants. Inaccurate forecasting of solar radiation can lead to poor harvest of solar energy and poor management of solar energy plants, which directly impacts electricity contribution to the national electricity grid. Long Short-Term Memory (LSTM) and its variant, PeepHole LSTM, are examples of Deep Learning models that can be used to predict solar radiation. The purpose of PeepHole LSTM is to introduce “peephole” connections in the LSTM model, which allow LSTM gates to directly inspect memory cell state and hence have richer information to process. However, there is still a research gap on the impact of “peephole” connections on the prediction performance of the LSTM model, especially in the context of forecasting solar radiation in Kishapu District, where the Kishapu Solar Project is located. The purpose of this study is to fill this research gap by developing both LSTM and PeepHole LSTM models and comparing their performances in forecasting solar radiation in Kishapu District. The 14-year Kishapu District daily solar radiation (Downward Shortwave Radiation) dataset was first pre-processed by scaling (normalizing) it using Standard Scaler and then split into training set (the first 70%), validation set (the next 15%) and test set (the last 15%) before being utilized to train and test the developed LSTM and PeepHole LSTM models. Both LSTM and PeepHole LSTM models used the previous 5 days' solar radiation values as inputs to predict the output (next day (6th day) solar radiation value). The trained and better-performing model between the two was finally saved in .h5 format and integrated with a Gradio based Web Application to provide a user interface for officials in Kishapu District and at Kishapu Solar Project to predict daily solar radiation. The findings from performance evaluation revealed that the LSTM model outperformed the PeepHole LSTM model in predicting solar radiation by achieving test Mean Absolute Error (MAE) and Root Mean Squared Error (RMSE) scores of 26.22 W/m2 and 36.65 W/m2, respectively, compared to MAE and RMSE scores of 30.84 W/m2 and 41.88 W/m2, respectively, achieved by the PeepHole LSTM model, concluding that “peephole” connections reduce the performance of the LSTM model rather than increasing it when used to forecast solar radiation in Kishapu District. This study’s recommendation to Artificial Intelligence (AI) software developers and researchers is to use the LSTM rather than the PeepHole LSTM Deep Learning model when forecasting solar radiation in Kishapu District and in locations with similar climatic conditions

The long short-term memory (LSTM) model is widely used in multiple areas, mainly for speech recognition, natural language processing and activity recognition. In the last few years, we started to see many variants of LSTM for recurrent neural networks since its inception in 1997. However, there weren’t many studies that have addressed the LSTM’s gating mechanism. In this paper, we propose a novel LSTM framework where we modify the architecture of the LSTM unit by adding a new layer that we call the “outlier gate”. The latter controls the flow of information that goes into the LSTM cell. This added signal allows us to avoid both the carry-over effect that the outliers have on the forecasted point and a bias in the estimates of our LSTM model – caused by unusual or non-repetitive events. The proposed architecture led us to an end-to-end trainable model that we applied in this paper to a financial time-series forecasting problem. Our results demonstrate that the new proposed LSTM architecture achieves better performance than the state-of-the-art original LSTM model.

Wearable electroencephalography (EEG) devices for seizure detection accuracy and reliability are deep learning (DL) applications in the field of epilepsy diagnosis. In this study, we sought to increase the accuracy of seizure detection using advanced DL algorithms on the Children’s Hospital Boston - Massachusetts Institute of Technology (CHB-MIT) EEG database. First, a fully convolutional network (FCN) was trained and assessed using accuracy and recall/precision metrics, and the early stopping technique was used to avoid overfitting. To assess the performance, the FCN was evaluated in terms of various metrics, including accuracy, precision, recall, F1-score, and receiver operating characteristic (ROC)-area under the curve (AUC). In addition, two-dimensional (2D) convolutional neural networks (CNNs) and long short-term memory (LSTM) models were used to model the database, and their performance was thoroughly measured using different metrics, graphs, and confusion matrices. Using LSTM variants, such as standard LSTM, bidirectional LSTM, stacked LSTM, and LSTM attention mechanisms, hybrid convolutional LSTM (ConvLSTM) models were trained and compared. The comparison was conducted based on the training and validation accuracy and loss, as well as the graphs resulting from the precision–recall curves. Apart from DL approaches, EEG signal analysis using time–frequency techniques, such as wavelet transform and short-time Fourier transform, has also been investigated. These methods assisted in the analysis of the time–frequency features of EEG signals in combination with DL models. This study demonstrates that the performance of wearable EEG devices can be augmented using a combination of DL and seizure signal processing techniques. The FCN achieved an accuracy of 92%, with a recall for seizures of 33%, an F1-score of 0.03, and strong ROC-AUC results. The 2D CNN achieved 96% accuracy, a seizure recall of 70%, an F1-score of 0.12, and an ROC-AUC score of 78%. The baseline LSTM struggled with effectiveness at 53% accuracy with a seizure recall of 18%. In contrast, the LSTM model, which incorporated synthetic minority oversampling technique (SMOTE) balancing, was able to reach improvements of up to 89% accuracy, with a precision of 91%, a recall of 86%, an F1-score of 0.89, and a strong ROC curve performance. Among the models, the LSTM with SMOTE was the best performer, with 89% accuracy, 91% precision, 86% recall, and an F1-score of 0.89. These results provide evidence that applying techniques for data balancing in combination with certain DL network architectures significantly improves the detection of seizures using wearable EEG devices worn on the body. We believe that real-time monitoring and high-performance systems are feasible using optimized DL frameworks. The analysis of the performance of different models allows for the understanding of the possibilities of optimizing the architectures of DL algorithms for the modern diagnosis of epilepsy in real time. The source code used to carry out the experiments is publicly available at CHB-MIT EEG Dataset Python Scripts (https://www.kaggle.com/code/adnankust/adnaneeg1).

This study aims to analyze user sentiment toward the NU Online application by applying a Long Short-Term Memory (LSTM) model. The research was based on 13,576 user reviews collected from the Google Play Store, which underwent preprocessing, sentiment labeling, and Exploratory Data Analysis (EDA). To ensure balanced classification, undersampling was used, resulting in 6,612 reviews equally divided into positive and negative classes. The text data was processed using tokenization and padding before being input into the LSTM model. Model training involved the use of binary crossentropy, Adam optimizer, EarlyStopping, and ReduceLROnPlateau techniques. The model achieved 93% precision, recall, and F1-score, with low error rates and strong generalization ability. EDA results showed that positive feedback mainly focused on worship features like salat schedules, while negative reviews addressed technical issues such as the azan sound. User review peaks occurred during religious periods and major updates. A Gradio-based web interface was also developed to display results and enable user-friendly access to visual sentiment insights. This implementation proves the practical potential of integrating LSTM with an interactive platform for effective sentiment analysis

This paper predicts Coronavirus Disease (COVID-19)'s potential influence on the Arab country's economy by using two predicting models: the Autoregressive Integrated Moving Average (ARIMA) model and Long Short-Term Memory (LSTM) model. The World Bank offers data of the Arab countries' Gross Domestic Product (GDP) over the period 1968-2019. As we show up at the pinnacle of the COVID-19 pandemic, quite possibly the most critical inquiry going up against us is: what is the potential impact of the pandemic on the rate of GDP in Arab countries during the pandemic period? LSTM is recurrent neural networks (RNN), which are competent in understanding temporal dependencies. Therefore, the model based on LSTM achieved a great fit with the real data, which is what made us rely on its results more than the ARIMA model. The results of the LSTM model showed that the COVID-19 pandemic caused a decrease in GDP by approximately 17.22% and 5.41% in 2020 and 2021, respectively, with respect to the real GDP announced by the World Bank. In addition, we trained the LSTM-based model on real data from 1968 to 2020 and predicted the GDP growth rate in the next five years until 2025. Thus, what is certain now is that the Arab world states have to encounter the challenges presented by the current ecosystem. Transition to digital economy is needed, additional volume of data with high-level accuracy is required to improve precise and robust models to attain projections with a reduced amount of margin of error.

Wave runup prediction is necessary for offshore structure designs and early warnings. Data-driven methods based on machine learning have inspired reduced-order solutions for wave–structure interaction problems. This study provides the quantification of deep learning algorithms’ potential for wave runup prediction. Two prominent deep learning models were utilized to predict the wave runups along the fore column of semisubmersible under head seas. The long short-term memory (LSTM) and the temporal convolutional networks (TCNs) were comprehensively compared based on the datasets from a model test carried out in the deep ocean basin. The LSTM and TCN model structures were optimized to compare prediction accuracy and computational complexity reasonably. The results reveal that (1) both developed TCN and LSTM models had a satisfied prediction accuracy of over 90%. Their predictions were extended to 10 s into the future with accuracies over 80% and 45%, respectively. (2) With the noise-extended datasets, the LSTM model was robust to noises, while the TCN model showed better prediction performance on the extreme wave runup events. (3) The incident wave and dominant rotation provided the major information for wave runup prediction. TCN and LSTM models’ prediction accuracies were 91.5% and 89.3% based on the simplified input tensors composed of incident wave and pitch. The comparison showed the great potential of the TCN model to predict the nonlinear wave runup with less time and memory costs. The input tensors’ design and optimization based on physical understanding also play a significant role in the prediction performance.

Time series analysis plays an important role in many fields. Autoregressive Integrated Moving Average (ARIMA) and Long Short-Term Memory (LSTM) methods are the most common tools to forecast sequential and time series data. However, both of them have obvious defects. The ARIMA model cannot capture non-linear information in sequences. Although the LSTM network is good at learning dynamic variations, it is prone to overfitting and requires a mass of long-term data. In this study, a hybrid technology blending the ARIMA and the LSTM algorithms was utilized to forecast the number of cases of influenza in China. This hybrid method leveraged the advantages of the ARIMA model and the LSTM network. Firstly, the ARIMA model was used to analyze the linear relationship within the time series. Then, the residuals of the ARIMA were taken as the input values to train the LSTM networks. A new hybrid ARIMA-LSTM model obtained, combining a SARIMA (0,1,0) (1,0,0)52 model and a LSTM model with 50 epochs and 32 batch size. This model successfully addressed the previously mentioned issues and enhanced the precision of the predictions. It managed to reduce 4.6% of RMSE, 8.9% of MSE, and 13.9% of MAE. In addition, this new algorithm was found that it didn’t have a high requirement like the individual LSTM model. Since there were not very many observations in the dataset, the performance of the individual LSTM model was not good. However, the integrated model improved this problem and obtained a more precise prediction. Even though the hybrid model had a better performance on prediction, it still has the risk of overfitting the data. The future work will be to improve the hybrid model to decrease this risk by adding more variables and modifying the structure of the LSTM model. Meanwhile, applying this method to another field further proves its feasibility and provides more effective prediction models.

High-resolution prediction of the spatial distribution of PM2.5 concentrations in China using a long short-term memory model

Effective monitoring of tool wear status can improve productivity and reduce losses. In previous studies, extensive feature selection was required when using the traditional machine learning method. The gating mechanism in the traditional long short-term memory (LSTM) model may incur information loss and a weaker representation of global sequential dependencies in handling long sequences. This paper aims to enhance the performance of the LSTM model in tool wear prediction by combining feature and temporal attention. Firstly, the original vibration signal is divided into sub-sequences and related features extracted. Secondly, the ability to capture global sequential dependencies using the LSTM model is improved by feature and temporal attention. Finally, a fully connected layer is used to predict tool wear values. Compared to traditional LSTM, the proposed method performs best in three evaluation metrics, RMSE, MAE, and the coefficient of determination.