A New Decoding Algorithm based on Equivalent Parity Check Matrix for LDPC Codes

This letter gives a random construction for Low Density Parity Check (LDPC) codes, which uses an iterative algorithm to avoid short cycles in the Tanner graph. The construction method has great flexible choice in LDPC code’s parameters including codelength, code rate, the least girth of the graph, the weight of column and row in the parity check matrix. The method can be applied to the irregular LDPC codes and strict regular LDPC codes. Systemic codes have many applications in digital communication, so this letter proposes a construction of the generator matrix of systemic LDPC codes from the parity check matrix. Simulations show that the method performs well with iterative decoding.

DOI: 10.1049/cp:20061337 ISBN: 0 86341 644 6 Location: Hangzhou, China Conference date: 6-9 Nov. 2006 Format: PDF The BER performance of presented quasi-cyclic (QC) low-density parity-check (LDPC) codes is not good as that of randomly constructed LDPC codes, while the lack of structure of randomly constructed LDPC codes implies serious disadvantages in terms of storing and accessing a large parity-check matrix. To solve the problems, this paper proposes a design of good quasi-cyclic (QC) low-density parity-check (LDPC) codes, the obtained algebraically structured codes have large minimum distances and good BER performance. The proposed design is based on index matrices, which determines the shifts of the circulant matrices of the sparse parity-check matrices. Compared with the presented design of QC LDPC codes, the designed QC LDPC codes are free from girth 4, sometimes free from girth 6, and have much larger minimum distances. Based on the algebraic code structure, the conditions of the girth and minimum distance of the codes are found. The BER performance of the designed QC LDPC block codes compares with that of randomly constructed LDPC codes for any block lengths. Better BER performance is obtained by increasing the circulant size of the base QC code. Simulations verify the construction of the QC LDPC codes to be valid. (4 pages) Inspec keywords: AWGN channels; error statistics; channel coding; algebraic codes; parity check codes; sparse matrices Subjects: Algebra; Other topics in statistics; Codes

Low-density Parity check codes (LDPC) are gaining interest for high data rate application in both terrestrial and spatial communications which requires low bit error rate. This paper proposes an algorithm through which the best parity check matrix is obtained for irregular low density parity check codes, which reduces the Bit Error Rate ,Frame Error Rate and computational complexity. Tanner graph also called a bipartite graph format in an Low Density Parity Check (LDPC) code design contains many short cycles; it will produce a computational complexity in a code design process and it degrades the code performance. To overcome this effect, we proposed an new algorithm which obtains a best final parity check matrix. Throughout the paper we will give the detailed description of an efficient algorithm proposed. The complexity is studied graphically and analytically. Using proposed algorithm, cycles of length four observed in corresponding matrix are removed. Each matrix is evaluated over a noisy Additive White Gaussian Noise (AWGN) channel. Bit Error rate and Frame error rate is calculated. The results are compared with randomly generated best parity check matrix. Simulation results shows that proposed method successfully overcomes the computational complexity and meets the near Shannon limit.

In mobile communications, the quality of signal is deteriorated by fading. The spatial diversity technique is used to reduce the degradation of the signal by fading. There are several techniques to realize the spatial diversity gain, such as Single- Input Multiple-Output (SIMO), Space-Time Block Code (STBC), and so on. The SIMO system realizes the receive diversity. The error correcting code can be combined with spatial diversity gain. Low-Density Parity Check (LDPC) codes can achieve good performance approaching Shannon limit. In particular, an irregular LDPC code with optimum degree distribution achieves better performance than a regular LDPC code. The optimum degree distribution of the irregular LDPC code depends both on the channel and the system. In this paper, we derive the Eb/No thresholds of a regular LDPC codes and the irregular LDPC codes for SIMO systems with several diversity orders. The Eb/No threshold is the smallest Eb/No that the decoder can achieve the error free. We also derive the optimum degree distributions of the irregular LDPC codes for SIMO systems with several diversity orders. We show that with low diversity order, the optimum degree distributions of the irregular LDPC code depends on the diversity order largely, while with high diversity order, the optimum degree distribution depends both on the diversity order and the combining scheme largely. We also show that comparing the optimum degree distributions for MRC and STBC, when the diversity orders are the same, the optimum degree distributions are also the same.

Turbo codes are attractive compared with Low Density Parity Check (LDPC) codes for Forward Error Correction (FEC) applications mainly due to their superior performance, especially at low Signal-to-Noise Ratio (SNR) such as are common in Powerline channels. For example, IEEE 1901-FFT PHY used the Turbo coding scheme defined in the HomePlug AV standards. However, patent fees are usually required for each turbo-code enabled manufactured device. The objective of this paper is to examine whether unlicensed LDPC codes, with optimized choices of block lengths, could be a viable alternative for future Powerline Communications (PLC) applications. The paper shows that the performance of the LDPC codes can approximate that of the Turbo codes with higher block lengths, on channels with typical and realistic PLC characteristics. The paper also shows that the additional complexity associated with this increase in block length can be mitigated by the use of Quasi-Cyclic LDPC (QC-LDPC) codes.

Low Density Parity Check (LDPC) codes have capacity-approaching performance over several channels of interest. In practice, for good block-error rate performance, the girth of the Tanner graph of an LDPC code needs to be as high as possible. In theory, to show that block-error rate approaches zero for increasing block-lengths, the girth of the Tanner graph sequence needs to tend to infinity with block-length. To meet these requirements, we construct sequences of large-girth irregular LDPC codes for a given degree-distribution pair (DDP) by applying a general node splitting algorithm on large girth graphs. The obtained Tanner graph meets the required DDP up to a suitable approximation. By optimizing the node-splitting method and using suitable large-girth graphs, we show code constructions with smaller block length for the same girth, when compared to previous constructions. Similar gains in block length are observed in the construction of sequences of large-girth protograph LDPC codes. Simulations, over a binary erasure channel, confirm the gains in block-error rate obtained by the large girth construction.

We propose a novel concatenated coding scheme combined Low Density Parity Check(LDPC) code and vertical Bell Labs layered space-time (VBLAST) code to improve the bit error rate (BER) performance for Free-space optical (FSO) communication links with On Off Keying(OOK) modulation. In the scheme, π-rotation encoding and belief-propagation (BP) decoding algorithm are employed in LDPC code, and minimum mean-square error (MMSE) soft-decision decoding algorithm is used for VBLAST code. Moreover, a joint iterative detection and decoding algorithm of VBLAST code and LDPC code is used to improve the overall link performance. At last, the BER of the proposed scheme over lognormal atmospheric turbulent fading channels is analyzed by using Monte Carlo method. The result shows that the BER of the proposed concatenated coding scheme is much improved than that only use VBLAST code scheme.

In this paper we propose an innovative channel coding scheme called 'Accumulate Repeat Accumulate codes' (ARA). This class of codes can be viewed as serial turbo-like codes, or as a subclass of Low Density Parity Check (LDPC) codes, thus belief propagation can be used for iterative decoding of ARA codes on a graph. The structure of encoder for this class can be viewed as precoded Repeat Accumulate (RA) code or as precoded Irregular Repeat Accumulate (IRA) code, where simply an accumulator is chosen as a precoder. Thus ARA codes have simple, and very fast encoder structure when they representing LDPC codes. Based on density evolution for LDPC codes through some examples for ARA codes, we show that for maximum variable node degree 5 a minimum bit SNR as low as 0.08 dB from channel capacity for rate 1/2 can be achieved as the block size goes to infinity. Thus based on fixed low maximum variable node degree, its threshold outperforms not only the RA and IRA codes but also the best known LDPC codes with the dame maximum node degree. Furthermore by puncturing the accumulators any desired high rate codes close to code rate 1 can be obtained with thresholds that stay close to the channel capacity thresholds uniformly. Iterative decoding simulation results are provided. The ARA codes also have projected graph or protograph representation that allows for high speed decoder implementation.

Big data storage demands larger cluster. The increasing size of the cluster may lead to failures of larger number of nodes. To provide reliable big data storage, replications are not cost-effective and does not provide a robust solution to prevent data loss. Traditional erasure codes applied in the RAID system such as Reed-Solomon (R-S) based solutions have limitations in providing high reliability. This is because higher reliability requires erasure codes with larger size. The computational cost of the R-S codes increase quadratically with the number of failures the R-S codes can tolerate for the same redundancy rate. It has been shown that Low Density Parity Check (LDPC) codes have lower computational cost and repair network traffic compared with R-S based solutions. Unfortunately, there does not exist a construction method for LDPC codes with larger size to control the computational cost and repair traffic. In this paper, a novel method is proposed to construct a family of LDPC codes - expanCodes with expandable sizes. The proposed expanCodes allows the encoding and decoding complexity remain unchanged with the increase of the size of the LDPC codes. As a result, increased reliability can be achieved without additional computation and repair traffic. The proposed expanCodes is integrated with the Hadoop system. Simulations show that more than 29% decrease in terms of encoding and decoding latency compared with R-S based solutions.

The queued-code based on low-density parity-check (LDPC) codes, which exploit both the near Shannon-limit performance LDPC codes and the instantaneous channel state information (CSI), can provide excellent performance in the block fading channels. The existing work utilized the conventional random puncturing and repetition operation, which may lead to considerable performance loss due to the changed intrinsic connections of parity-check matrix (PCM) for the receiver. In this paper, we present a reversed sequential puncturing (RSP) scheme and a construction method with modified dual-diagonal structure for the LDPC coded queued-code. The consecutive puncturing pattern in reversed direction can ensure the uniform row-weight distribution of the punctured PCM. The modified dual-diagonal form and the RSP scheme can ensure no more than one punctured symbol involved in each check-sum equation. The simulation results demonstrate that our proposed scheme can achieve noticeable performance gains.

In this paper, a random Low-Density Parity-Check (LDPC) code is proposed for Noncontiguous Orthogonal Frequency Division Multiplexing (NC-OFDM) Cognitive Radio (CR) systems. Unlike other encoding schemes which achieve a system code rate of only 1/4 when half of the subcarriers are active, the proposed scheme achieves a system code rate of 1/2. The LDPC code is used to enhance the data transmission rate. A new channel model comprised of a binary erasure channel concatenated with an uncorrelated fading channel and an AWGN channel is adopted for NC-OFDM CR systems. Moreover, the adopted channel model is employed with density evolution algorithm to obtain good degree distribution pairs for the LDPC code. Thereafter, a modified shortest-path algorithm is used to construct the parity-check matrix for the LDPC code. Simulation results show that the proposed LDPC code performs well in terms of both error rate and data transmission rate.

Day by day the internet traffic is increasing rapidly. Challenges to improve these internet traffic requirements leads to evolution of 5G NR LDPC (New Radio Low Density Parity Check) codes which provides high coding gain and energy efficiency. BER Vs Eb/No dB curve defines the energy efficiency and coding gain of the any error correcting codes. LDPC codes which are adopted by 5G Standard are called 5G NR LDPC codes.In the design of the decoder,Message Passing Approach reduces the decoding complexity due to the sparsity of the parity check matrix. An efficient decoding algorithm is the key to the successful code. In this paper an iterative minsum approximation message passing decoding algorithm has been implemented for both BG1 and BG2. Results show that the coding gain can be improved up to 9dB.

본 논문에서는 OFDM 시스템에서 고속 처리와 성능 향상을 위한 LDPC 코드 기반 결정 궤환 등화기(Decision Feedback Equalizer: DFE)를 제안한다. LDPC 코드는 우수한 오류 정정 능력과 Shannon의 채널 용량에 근접하는 성능을 갖는다. 그러나, 많은 parity 검사 행렬과 반복 횟수를 가진다는 단점이 있다. 제안된 시스템에서는 판정된 신호와 복호기 사이의 신호의 MSE(Mean Square Error)를 등화기로 피드백한다. 이러한 방법을 사용하면 추정된 채널 응답을 보정해 주기 때문에 성능을 향상시킬 수 있다. 또한, 동일한 성능에서 피드백이 포함되지 않은 시스템보다 낮은 반복 횟수를 갖기 때문에 시스템의 복잡도를 줄일 수 있다. 시뮬레이션을 통해 다중 경로 채널에서 CFO(Carrier Frequency Offset)와 위상 잡음이 고려된 OFDM 시스템의 성능을 평가하여 제안 시스템의 우수성을 보인다. In this paper, we propose a decision feedback equalizer based on LDPC(Low Density Parity Check) code for the fast processing and performance improvement in OFDM system. LDPC code has good error correcting capability and its performance approaches the Shannon capacity limit. However, it has longer parity check matrix and needs more iteration numbers. In our proposed system, MSE(Mean Square Error) of signal between decision device and decoder is fed back to equalizer. This proposed system can improve BER performance because it corrects estimated channel response more accurately. In addition, the proposed system can reduce complexity because it has a lower number of iterations than system without feedback at the same performance. Simulation results evaluate and show the performance of OFDM system with the CFO and phase noise in multipath channel.

The increasing demand for high-density and high-speed digital optical recording systems has made the development of advanced coding and signal processing techniques for fast and reliable data recovery increasingly important. In recent years, the parity-check (PC)-code-based reception technique has been widely studied for magnetic recording systems, and it is projected to be highly promising for high-density optical recording. The PC code is an inner error correction code (ECC), which can detect dominant short error events of the system, using only a few parity bits. This reduces the loss in error correction capability of the outer ECC due to random short errors and results in a simple and efficient solution to improve the overall performance. This thesis is dedicated to the design and analysis of PCcode- based recording systems to achieve higher recording capacity with low implementation complexity, for high-density blue laser disc systems. In particular, most of the key components of the PC-code-based optical recording system have been designed and optimized for different recording densities, and different proportions of white noise and media noise. During the development of advanced coding and detection techniques, it becomes necessary to investigate the system’s performance with different coding schemes and recording densities. In Chapter 2 of the thesis, we propose a generalized Braat-Hopkins model for optical recording channels, which provides a fair basis for the performance comparison of detection schemes over different coding schemes and recording densities, for channels with additive, white Gaussian noise (AWGN) and media noise. Various basic issues associated with the PC-code-based systems are investigated in Chapter 3. These include bounds for bit error rates and error event probabilities, the dominant error events at channel detector output, different PC codes, simple and efficient post-processors, the impact of error events that are split across data block boundaries and the corresponding remedy, as well as the effects of code rates and recording densities. Simulation results show that a 4-bit PC code achieves the best performance. The corresponding bit error rates (BERs) are very close to the performance bounds, at both nominal and high densities. Constrained codes, which serve as a key component in the read-write channel of data storage systems, are desired to have a high code rate with low-complexity encoder/decoder. In Chapter 4, we investigate the design of certain capacity-approaching constrained codes for optical recording systems. In particular, we derive analytically the relationship between the number of encoder states and the maximum size of these codes. We identify the minimum number of encoder states that maximizes the code rate, for any desired codeword length. The design of constrained PC codes is key to the development of PCcode- based systems, and the systematic design of efficient constrained PC codes remains a challenging problem. In Chapter 5, we propose a general and systematic code design technique for constructing capacity-approaching constrained PC codes, which can detect any type of error events of the system, with the minimum code rate loss. Compared to the rate 2/3 code without parity, the newly designed constrained 4-bit PC code achieves a performance gain of 2 dB at nominal density, and 1.5 dB at high density, at BER = 10-5. As the dominant noise for high-density optical recording systems, media noise severely degrades the performance of channel detectors and postprocessors that are designed for AWGN. In Chapter 6, we propose two novel modifications to the bit detector to combat media noise. We further develop a data-dependent post-processing scheme for error correction. Compared to the system designed without considering media noise and without PC codes, the overall performance gain of the developed scheme can be more than 11 dB at high media noise levels. In data storage systems, the ECC failure rate (EFR) serves as the ultimate measure of the data recovery performance. In Chapter 7, we develop semi-analytical approaches for estimating the EFR, and analyze EFRs for the developed PC-code-based systems, for the cases without and with interleaving. Our analysis shows that with the optimum interleaving degrees, compared to the rate 9/13 code without parity, the 2-bit PC code achieves a gain of around 0.5 dB, and the 4-bit PC code gains 0.6 dB, at high record ing density and EFR = 10-16. The thesis concludes in Chapter 8 with some suggestions for further work.

The application of Low Density Parity Check (LDPC) code in the anti-interference systems has drawn an increasing attention, due to its admiring performance which is very close to the theory limit. This paper focuses on a LDPC encoded slow frequency hopping (SFH) communication system with partial-band interference. Firstly, a modified soft- decision algorithm based on the utilization of interference information is proposed, and its performance is compared with some other soft-decision methods. Secondly, with numerical simulation, the influence of code rate, code length and the number of symbols per hops on the performance of the system with partial band noise interference is illustrated and examined in detail. Considering the great influence of hops per symbol on the performance, interleaver should be used and its influence on the performance is further examined by simulation. Finally, some constructive advises for the design of LDPC coded SFH system are given. Simulation results show that, with a reasonable design, the SFH system with LDPC code could achieve a desirable performance.