A Novel MTC-RB Heuristic for Addressing Target Coverage Problem in Heterogeneous Wireless Sensor Network

There are different applications in wireless sensor networks, where sensors with different capacities are deployed. So designing a reliable and scalable routing protocol for a real world wireless heterogeneous sensor network is an interesting task. In this paper, we propose a novel power aware routing for wireless heterogeneous sensor network, which can provide loop less, stateless routing without using any prior neighborhood information. It utilizes both symmetric and asymmetric links to forward a data from source to sink. This protocol explores the neighbor node relations and chooses the best-hop based on node power. It eliminates the low-powered nodes to become hopnodes in the contention process. It also prolongs the network lifetime. Analysis shows that this scheme significantly outperforms the existing protocol in wireless heterogeneous sensor networks.

Wireless sensor networks consist of a large number of low-cost, low-power, and multifunctional sensor nodes that communicate over short distances through wireless links. Such sensor networks are ideal candidates for a wide range of applications such as monitoring of critical infrastructures, data acquisition in hazardous environments, industry control systems, vehicular networks, and military operations. Wireless sensor networks introduce new security challenges due to their dynamic topology, severe resource constraints, and absence of a trusted infrastructure. The purpose of this special issue is to publish high-quality research papers as well as review articles addressing recent advances of wireless sensor network security. In this special issue, we will explore the topic of security challenges and solutions for the wide application of wireless sensor networks in different areas, such as RFID and smart grid. RFID has been widely used in logistics and internet of things. Smart grid leverages sensor networks to better balance the load of the power grid. Both of them have great impact on the daily life and areweak points of thewhole economy,which attract the attention of terrorists. The feasible attacks and defense solutions are still not clear.The papers in this volume also cover several important foundational security services for wireless sensor networks, such as key management, key distribution, secure cluster formation, secure architecture for multihop communication, intrusion prediction, and secure localization. All these foundational security services are critical bases for application of wireless sensor networks. We hope that the papers in this volume engender further thinking about new security challenges for wireless sensor networks and even further “out-of-the-box” ideas about how to solve new security problems for wireless sensor networks.

As more and more innovative applications of wireless sensor networks emerge, the need for deploying heterogeneous sensors with different functionalities and capabilities rise rapidly. In this study, we consider a heterogeneous sensor network containing at least two types of sensors: powerful sensors and normal sensors. Powerful sensors have higher energy and computing capacities, and can communicate with normal sensors using the same network interface. Communications between powerful sensors may thus be facilitated by building an overlay on top of the normal sensors. The topology of the overlay is critical. The overlay must have a low diameter to efficiently support upper layer applications such as resource discovery. It must also consider the energy consumption of the relaying normal sensors. In this paper, we propose a distributed overlay formation protocol to achieve the above goals. Through simulation, we compare our protocol with two overlay formation protocols, fully connected graph and minimum spanning tree. The results show that our proposed protocol can achieve better performance both in message latency and energy consumption.

Achieving optimal field coverage is a significant challenge in various sensor network applications. In some specific situations, the sensor field (target) may have coverage gaps due to the random deployment of sensors; hence, the optimized level of target coverage cannot be obtained. Given a set of sensors in the plane, the target coverage problem is to separate the sensor into different groups and provide them specific time intervals, so that the coverage lifetime can be maximized. Here, the constraint is that the network should be connected. Presently, target coverage problem is widely studied due to its lot of practical application in Wireless Sensor Network (WSN). This paper focuses on target coverage problem along with the minimum energy usage of the network so that the lifetime of the whole network can be increased. Since constructing a minimum connected target coverage problem is known to be NP-Complete, so several heuristics, as well as approximation algorithms, have been proposed. Here, we propose a heuristic for connected target coverage problem in WSN. We compare the performance of our heuristic with the existing heuristic, which states that our algorithm performs better than the existing algorithm for connected target coverage problem. Again, we have implemented the 2-connected target coverage properties for the network which provide fault tolerance as well as robustness to the network. So, we propose one algorithm which gives the target coverage along with 2-connectivity.

Solving energy issues for sweep coverage in wireless sensor networks

Resource Management Approach to an Efficient Wireless Sensor Network

All types of applications in Wireless Sensor Network (WSN) generally faces problem of coverage as per the study. Full coverage method, being simple and easy is widely adopted theoretically. To reduce the overuse of sensor, full coverage network is composed of partial ones. Full coverage network is not best for real-world problems because of a large number of restrictions. In this survey, the characteristics of partial or probabilistic coverage problems are analyzed, and compared with full coverage problems. This survey will help to overview unsettled coverage problems. Relevant models, such as detection model, network model, and deployment model based on partial and probabilistic coverage problem are also summarized. This paper discusses three main objectives; how to maximize coverage quality, how to maximize network lifetime, and how to minimize the number of sensors for coverage problems with uncertain properties by deploying, scheduling or selecting, and regulation of sensors. Future challenges are also discussed.

In order to reduce or avoid the coal mine accidents, this paper proposes the application of wireless sensor networks (WSN) in the coal mine safety intelligent monitoring system, and discusses the principle and advantages of wireless sensor networks. According to the current situation of low level of intellectualization in coal mine safety monitoring system and the existing problems, this paper proposes the designing proposal and the monitoring mechanism of the coal mine safety intelligent monitoring system, discusses the feasibility, the method and the way of the application of the wireless sensor networks in the coal mine safety intelligent monitoring system.

Developing Wireless Sensor Networks (WSN) applications is not an easy task, since it demands different expertise and knowledge. To address this problem, we propose a model-driven approach to build WSN applications. It promotes the separation of concerns between two levels of requirements involved: (i) domain experts, with no knowledge on WSN platforms, contribute to the development of applications, (ii) network experts, with no knowledge on the application domain, program nodes to meet application requirements. Our approach also promotes the reuse of software artifacts: an application model can be reused on different sensor platforms and a platform model can be reused for different WSN applications.

Data aggregation processes aim to reduce the amount of exchanged data in wireless sensor networks and consequently minimize the packet overhead and optimize energy efficiency. Securing the data aggregation process is a real challenge since the aggregation nodes must access the relayed data to apply the aggregation functions. The data aggregation security problem has been widely addressed in classical homogeneous wireless sensor networks, however, most of the proposed security protocols cannot guarantee a high level of security since the sensor node resources are limited. Heterogeneous wireless sensor networks have recently emerged as a new wireless sensor network category which expands the sensor nodes’ resources and capabilities. These new kinds of WSNs have opened new research opportunities where security represents a most attractive area. Indeed, robust and high security level algorithms can be used to secure the data aggregation at the heterogeneous aggregation nodes which is impossible in classical homogeneous WSNs. Contrary to the homogeneous sensor networks, the data aggregation security problem is still not sufficiently covered and the proposed data aggregation security protocols are numberless. To address this recent research area, this paper describes the data aggregation security problem in heterogeneous wireless sensor networks and surveys a few proposed security protocols. A classification and evaluation of the existing protocols is also introduced based on the adopted data aggregation security approach.

The rapid advancement of programmable logic devices (PLDs) and field-programmable gate arrays (FPGAs) has enabled the development of adaptive VLSI architectures optimized for next-generation wireless communication systems. This research focuses on RFID and Wireless Sensor Network (WSN) applications, integrating AI-driven optimization techniques to enhance power efficiency, processing speed, and system adaptability. A hybrid AI-based hardware optimization technique, combining Reinforcement Learning (RL) and Genetic Algorithm (GA), is introduced to improve resource utilization and reduce latency. Additionally, an AI-Optimized Dynamic Frequency Scaling (DFS) technique is implemented to adjust FPGA operating frequencies in real-time, achieving a power reduction of 27.6% while maintaining high computational efficiency. Processor implementation for RFID-based power-saving appliances, reducing power consumption by 32.5% compared to conventional approaches. Hardware realization of an optimized anti-collision algorithm for RFID, achieving a 24.8% increase in tag identification speed. FPGA-based security architecture integrating lightweight cryptographic techniques, enhancing data security with a 96.2% encryption success rate and 25% lower hard-ware resource usage. Power-efficient WSN node implementation using an adaptive localization algorithm, reducing localization errors by 18.4% and extending node lifespan by 29.3%. Low-power CORDIC algorithm-based DPSK modem implementation with 32.1% lower latency in real-time signal processing applications. AI-Optimized DFS technique, reducing dynamic power consumption by 27.6% and improving computational throughput by 22.7%, making FPGA implementations more energy-efficient. The designs were developed using VHDL-based high-level hardware description, simulated in Xilinx ISE 14.3, and implemented on Virtex-5, Spartan-6, and Kintex-7 FPGA platforms. Performance evaluations and comparative studies with existing models confirm significant improvements in power efficiency, processing speed, and adaptability. The findings contribute to the development of high-performance, power-efficient, and scalable VLSI architectures for RFID and WSN applications, paving the way for next-generation secure and intelligent wireless communication systems.

Internet of Things (IOT) is experiencing a super-fast growing phase. Wireless Sensor Networks (WSN), as the “five sense organs” and teleneuron of IOT, is developing fast along. Owing to the application-oriented characteristics of WSN, WSN applications may differ enormously in implementation methods. The WSN developers may have to rewrite the code for each and every application. Along with the increasing demand to WSN applications, WSN developers may have heavier tasks of programming for these applications. Thanks to TinyOS and NesC, an operating system and programming language designed especially for WSN, raises the WSN application's programming to a higher level. Large number of supported sensor hardware plus system provided and user-de-fined libraries eases WSN application programmers' jobs. How-ever, the massive amount of nodes' communication and networking, and security protection slows down the development pace. A unified and empirical WSN application implementation platform is one of the available solutions to the problem. This paper introduces an empirical WSN application implementation platform, which avails the WSN developers build an application with unified code template and network packet generation and processing strategies.

Wireless network of wearable biomedical sensors by human body shows great potential to enhance the biometrics performance significantly. Meanwhile, it poses prominent characteristics and challenges to physicians and engineers for its particular medical application as compared to other application of wireless sensor networks (WSN). Mobility pattern plays an important role in designing the wireless body sensor networks (WBSN) and will also affect the accuracy of modeling WBSN in health care application. Much of the mobility scenarios generated in current work of wireless body sensor networks has used fairly simple models to generate the mobile topological graph, which bear little resemblance to the actual mobility patterns. This paper is the first attempt to investigate the mobility model in WBSN based on the existing mobility models in wireless data networks and ad hoc networks. We first briefly review the existing mobility models in related research areas such as wireless ad hoc network and cellular networks. Further on, we propose a dedicated and more realistic mobility model named BAMM (Body Area Mobility Model) for wireless body sensor networks by concentrating on the unique characteristics of WBSN and finally study the effects of mobility on the performance of WBSN by simulation experiments.

Energy consumption and the secure transmission are the increasing fields of research challenge in wireless sensor network (WSN) applications. Heterogeneous WSN is an efficient network strategy that has sensor nodes with different processing, memory power, and transmission capacity. In order to provide effective transmission for this type of network, clustering associated with secure routing is enabled to transfer the data packets safely to the endpoint. Data gathering and clustering help to group the network and control transmission overhead during data transmission. Hybridization of K-means clustering algorithm with Ant Lion Optimizer for grouping of nodes and optimal CH selection is utilized for better energy efficiency. Thus, a Miscegenation of Ant Lion optimizer within K-means for clustering and Spherical grid based multi-curve Elliptic curve cryptographic routing (MALOKSER) is determined for effective clustering and secure routing of data packets within time to the base station. The main aim of our work is to enhance network security and energy savage in the wireless network communication system. Elliptic curve cryptography with spherical grid multi-tier routing ensure secure transmission by encrypting the messages with two different keys and forward the packets in a spherical format. The performance is evaluated under metrics such as packet deliver ratio, minimum energy consumptions, communication overheads, throughput and end to end delay with the existing standards shows better results. This proves the proposed technique can actively reduce the energy utilization with an efficient and safe routing of data over the network.

The main study of traditional probability coverage problem in wireless sensor networks (WSNs) is aiming at two-dimensional space, however, most practical applications of wireless sensor network is placed in a three-dimensional sensor networks. Therefore, probability model is introduced for three-dimensional WSNs. This paper presents a method that using Voronoi divide to control the Scheduling of the probability model nodes in the target area. Also, a coverage control algorithm based on probability model (PMCCA) is proposed. We verify the effectiveness and the practice of PMCCA algorithm by comparing PMCCA algorithm to another algorithm in simulation experiment.