Design of High-Performance Microprocessor Circuits

This book covers the design of next generation microprocessors in deep submicron CMOS technologies. The chapters in Design of High Performance Microprocessor Circuits were written by some of the world's leading technologists, designers, and researchers. All levels of system abstraction are covered, but the emphasis rests squarely on circuit design. Examples are drawn from processors designed at AMD, Digital/Compaq, IBM, Intel, MIPS, Mitsubishi, and Motorola. Each topic of this invaluable reference stands alone so the chapters can be read in any order. The following topics are covered in depth: Architectural constraints of CMOS VLSI design Technology scaling, low-power devices, SOI, and process variations Contemporary design styles including a survey of logic families, robust dynamic circuits, asynchronous logic, self-timed pipelines, and fast arithmetic units Latches, clocks and clock distribution, phase-locked and delay-locked loops Register file, cache memory, and embedded DRAM design High-speed signaling techniques and I/O design ESD, electromigration, and hot-carrier reliability CAD tools, including timing verification and the analysis of power distribution schemes Test and testability Design of High-Performance Microprocessor Circuits assumes a basic knowledge of digital circuit design and device operation, and covers a broad range of circuit styles and VLSI design techniques. Packed with practical know-how, it is an indispensable reference for practicing circuit designers, architects, system designers, CAD tool developers, process technologists, and researchers. It is also an essential text for VLSI design courses.

This book covers the design of next generation microprocessors in deep submicron CMOS technologies. The chapters in Design of High Performance Microprocessor Circuits were written by some of the world's leading technologists, designers, and researchers. All levels of system abstraction are covered, but the emphasis rests squarely on circuit design. Examples are drawn from processors designed at AMD, Digital/Compaq, IBM, Intel, MIPS, Mitsubishi, and Motorola. Each topic of this invaluable reference stands alone so the chapters can be read in any order. The following topics are covered in depth: Architectural constraints of CMOS VLSI design Technology scaling, low-power devices, SOI, and process variations Contemporary design styles including a survey of logic families, robust dynamic circuits, asynchronous logic, self-timed pipelines, and fast arithmetic units Latches, clocks and clock distribution, phase-locked and delay-locked loops Register file, cach memory, and embedded DRAM design High-speed signaling techniques and I/O design ESD, electromigration, and hot-carrier reliability CAD tools, including timing verification and the analysis of power distribution schemes Test and testability Design of High-Performance Microprocessor Circuits assumes a basic knowledge of digital circuit design and device operation, and covers a broad range of circuit styles and VLSI design techniques. Packed with practical know-how, it is an indispensable reference for practicing circuit designers, architects, system designers, CAD tool developers, process technologists, and researchers. It is also an essential text for VLSI design courses.

PurposePower consumption is a top priority in high-performance asynchronous circuit design today. The purpose of this study is to provide a spatial correlation-aware statistical dual-threshold voltage design method for low-power design of template-based asynchronous circuits.Design/methodology/approachIn this paper, the authors proposed a statistical dual-threshold voltage design of template-based asynchronous circuits considering process variations with spatial correlation. The utilized circuit model is an extended Timed Petri-Net which captures the dynamic behavior of the asynchronous circuit with statistical delay and power values. To have a more comprehensive framework, the authors model the spatial correlation information of the circuit. The authors applied a genetic optimization algorithm that uses a two-dimensional graph to calculate the power and performance of each threshold voltage assignment.FindingsExperimental results show that using this statistically aware optimization, leakage power of asynchronous circuits can be reduced up to 3X. The authors also show that the spatial correlation may lead to large errors if not being considered in the design of dual-threshold-voltage asynchronous circuits.Originality/valueThe proposed framework is the scheme giving a low-power design of asynchronous circuits compared to other schemes. The comparison exhibits that the proposed method has better results in terms of performance and power. To consider the process variations with spatial correlation, the authors apply the principle component analysis method to transform the correlated variables into uncorrelated ones.

As demand rises for circuits with higher performance, higher complexity, and decreased feature size, asynchronous (clockless) paradigms will become more widely used in the semiconductor industry, as evidenced by the International Technology Roadmap for Semiconductors' (ITRS) prediction of a likely shift from synchronous to asynchronous design styles in order to increase circuit robustness, decrease power, and alleviate many clock-related issues 1 .ITRS predicts that asynchronous circuits will account for 19% of chip area within the next 5 years, and 30% of chip area within the next 10 years 2 .To meet this growing industry need, students in Computer Engineering should be introduced to asynchronous circuit design to make them more marketable and more prepared for the challenges faced by the digital design community for years to come. DI Register DI CombinationalLogic

We have developed a method of simplifying physical design for undergraduates enrolled in analog VLSI design. The analog CMOS course is a VLSI design course with laboratory that includes design, fabrication and testing of analog CMOS circuits. A student's design begins with a simple current mirror and ends with different types of sampling circuits such as switched-capacitor and autozero circuits. The layout of thest parts is simplified by using cells similar to those used for analog stack generators. By introducing this course, more advanced digital VLSI courses can be taught at the undergraduate level, including those with larger projects.

Conventional active noise cancelling (ANC) headphones perform well in reducing the low-frequency noise and isolate high-frequency noise by earmuffs passively. These systems often use high-speed digital signal processors (DSPs) to cancel out the disturbing noise at such low frequencies, which result in a high-power dissipation for a commercial ANC headphone. This paper proposes a high-performance feedforward ANC architecture and implements a high-performance low power circuit design accordingly based on the filtered-x least mean square (FxLMS) adaptive algorithm. Experimental results show that the proposed high-performance circuit design can reduce disturbing noise of various frequency bands very well, and outperforms the existing works. After fabricating by using the TSMC 90nm CMOS technology, the proposed design can attenuate 15 dB for the broadband pink noise between 50–1500 Hz when operated at 10 MHz clock frequency at the costs of 84.2 k gates and power consumption of 6.42 mW only.

The Air Force Institute of Technology, like many other schools, uses the Berkeley Tool Set for chip layout in VLSI design courses. One of the important tools of this set is the layout editor, MAGIC. Designing at the mask level is one of the important aspects of a VLSI design course, as it allows students to get a feel for what kinds of decisions and design trade-offs must be made in creating a circuit. One of the drawbacks of using a layout editor, such as MAGIC, is the amount of time it takes students to learn the interface to the tool, and the resistance to having to memorize a long list of commands or macros. To overcome this drawback, we have created a graphical user interface using Tooltool.

Minimizing power consumption is one of the most important objectives in VLSI design. This paper introduces a methodology for the optimization of total power consumption of template based asynchronous circuits via dual V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">dd</sub> assignment, dual V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">th</sub> assignment and template sizing while maintaining performance requirements. The utilized circuit model is a Timed Petri-net which captures the dynamic behavior of the circuit. These three power reduction techniques are properly encoded in a quantum genetic algorithm and evaluated simultaneously. Experimental results are given for a number of 65 nm related benchmark circuits and show that this method reduces the total power by close to an order of magnitude, with no or negligible performance penalty. From the experimental results, we show that the combination of asynchronous design and three low power techniques is an effective way to achieve low power and high performance circuits.

An attempt has been made to introduce VLSI design education into the traditional undergraduate electrical engineering curriculum at the State University of New York, New Paltz, through an innovative one-semester digital VLSI design course sequence. The emphasis in VLSI education is on full custom design, thereby exposing undergraduate students to the lower levels of design. The course is compatible with the requirements of the MOSIS silicon foundry for chip fabrication.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

Practical Synthesis of High-Performance Analog Circuits presents a technique for automating the design of analog circuits. Market competition and the astounding pace of technological innovation exert tremendous pressure on circuit design engineers to turn ideas into products quickly and get them to market. In digital Application Specific Integrated Circuit (ASIC) design, computer aided design (CAD) tools have substantially eased this pressure by automating many of the laborious steps in the design process, thereby allowing the designer to maximise his design expertise. But the world is not solely digital. Cellular telephones, magnetic disk drives, neural networks and speech recognition systems are a few of the recent technological innovations that rely on a core of analog circuitry and exploit the density and performance of mixed analog/digital ASICs. To maximize profit, these mixed-signal ASICs must also make it to market as quickly as possible. However, although the engineer working on the digital portion of the ASIC can rely on sophisticated CAD tools to automate much of the design process, there is little help for the engineer working on the analog portion of the chip. With the exception of simulators to verify the circuit design when it is complete, there are almost no general purpose CAD tools that an analog design engineer can take advantage of to automate the analog design flow and reduce his time to market. Practical Synthesis of High-Performance Analog Circuits presents a new variation-tolerant analog synthesis strategy that is a significant step towards ending the wait for a practical analog synthesis tool. A new synthesis strategy is presented that can fully automate the path from a circuit topology and performance specifications to a sized variation-tolerant circuit schematic. This strategy relies on asymptotic waveform evaluation to predict circuit performance and simulated annealing to solve a novel non-linear infinite programming optimization formulation of the circuit synthesis problem via a sequence of smaller optimization problems. Practical Synthesis of High-Performance Analog Circuits will be of interest to analog circuit designers, CADsEDA industry professionals, academics and students.

Field Programmable Gate Arrays (FPGAs) have been indispensable components of embedded systems and datacenter infrastructures. However, energy efficiency of FPGAs has become a hard barrier preventing their expansion to more application contexts, due to two physical limitations: (1) The massive usage of routing multiplexers causes delay and power overheads as compared to ASICs. To reduce their power consumption, FPGAs have to operate at low supply voltage but sacrifice performance because the transistors drive degrade when working voltage decreases. (2) Using volatile memory technology forces FPGAs to lose configurations when powered off and to be reconfigured at each power Resistive Random Access Memories (RRAMs) have strong potentials in overcoming the physical limitations of conventional FPGAs. First of all, RRAMs grant FPGAs non-volatility, enabling FPGAs to be Normally powered off, Instantly powered on. Second, by combining functionality of memory and pass-gate logic in one unique device, RRAMs can greatly reduce area and delay of routing elements. Third, when RRAMs are embedded into datpaths, the performance of circuits can be independent from their working voltage, beyond the limitations of CMOS circuits. However, researches and development of RRAM-based FPGAs are in their infancy. Most of area and performance predictions were achieved without solid circuit-level simulations and sophisticated Computer Aided Design (CAD) tools, causing the predicted improvements to be less convincing. In this thesis,we present high-performance and low-power RRAM-based FPGAs fromtransistorlevel circuit designs to architecture-level optimizations and CAD tools, using theoretical analysis, industrial electrical simulators and novel CAD tools. We believe that this is the first systematic study in the field, covering: From a circuit design perspective, we propose efficient RRAM-based programming circuits and routing multiplexers through both theoretical analysis and electrical simulations. The proposed 4T(ransitor)1R(RAM) programming structure demonstrates significant improvements in programming current, when compared to most popular 2T1R programming structure. 4T1R-based routingmultiplexer designs are proposed by considering various physical design parasitics, such as intrinsic capacitance of RRAMs and wells doping organization. The proposed 4T1R-based multiplexers outperformbest CMOS implementations significantly in area, delay and power at both nominal and near-Vt regime. From a CAD perspective, we develop a generic FPGA architecture exploration tool, FPGASPICE, modeling a full FPGA fabric with SPICE and Verilog netlists. FPGA-SPICE provides different levels of testbenches and techniques to split large SPICE netlists, in order to obtain better trade-off between simulation time and accuracy. FPGA-SPICE can capture area and power characteristics of SRAM-based and RRAM-based FPGAs more accurately than the currently best analyticalmodels. From an architecture perspective, we propose architecture-level optimizations for RRAMbased FPGAs and quantify their minimumrequirements for RRAM devices. Compared to the best SRAM-based FPGAs, an optimized RRAM-based FPGA architecture brings significant reduction in area, delay and power respectively. In particular, RRAM-based FPGAs operating in the near-Vt regime demonstrate a 5x power improvement without delay overhead as compared to optimized SRAM-based FPGA operating at nominal working voltage.

The fine tuning of the dominant polarity in polymer semiconductors is a key issue for high-performance organic complementary circuits. In this paper, we demonstrate a new methodology for addressing this issue in terms of molecular design. In an alternating conjugated donor-acceptor copolymer system, we systematically engineered the chemical linkages that connect the aromatic units in donor moieties. Three donor moieties, thiophene-vinylene-thiophene (TVT), thiophene-acetylene-thiophene (TAT), and thiophene-cyanovinylene-thiophene (TCNT), were combined with an acceptor moiety, thienoisoindigo (TIID), and finally, three novel TIID-based copolymers were synthesized: PTIID-TVT, PTIID-TAT, and PTIID-TCNT. We found that the vinylene, acetylene, and cyanovinylene linkages decisively affect the energy structure, molecular orbital delocalization, microstructure, and, most importantly, the dominant polarity of the polymers. The vinylene-linked PTIID-TVT field-effect transistors (FETs) exhibited intrinsic hole and electron mobilities of 0.12 and 1.5 × 10(-3) cm(2) V(-1)s(-1), respectively. By contrast, the acetylene-linked PTIID-TAT FETs exhibited significantly improved intrinsic hole and electron mobilities of 0.38 and 0.03 cm(2) V(-1) s(-1), respectively. Interestingly, cyanovinylene-linked PTIID-TCNT FETs exhibited reverse polarity, with hole and electron mobilities of 0.07 and 0.19 cm(2) V(-1) s(-1). As a result, the polarity balance, which is quantified as the electron/hole mobility ratio, was dramatically tuned from 0.01 to 2.7. Our finding demonstrates a new methodology for the molecular design of high-performance organic complementary circuits.

This paper presents a hazard-free design methodology for the design of asynchronous sequential circuits based on a combination of synchronous and asynchronous circuit elements. Earlier approaches to essential hazard-free design of asynchronous sequential circuits are based on any one of the two design philosophies: by the addition of delay elements to the state output, or by input gate modification. The former approach makes the whole design slower. On the other hand, the latter approach is based on the assumption that the gate delays are always higher than any wire delay present in the network, but in VLSI circuits the above assumption may not be true. The design in this paper makes no assumption about the delays of the network and hence is applicable to any environment. In addition, the design in this paper uses the minimum number of self-synchronous transitions, thus making it faster than the earlier designs.

Scaling of silicon transistors continue in the sub 100-nm regime amidst severe roadblocks. Increased short-channel effects, rising leakage currents, severe process parameter variations are only a few of the overwhelming challenges that the device and circuit designers are faced with. In an attempt to alleviate the problems associated with the scaling of silicon transistors, researchers have began a quest for novel alternate materials in a post-Si nanoelectronics era. Of the different materials investigated so far, carbon nanotubes with their superior transport properties, excellent thermal conductivities and high current handling capacities have proved to be a potential heir to Si. This paper reviews the promise of carbon nanotube field-effect transistors as future devices for high-performance as well as low-power electronics.

Asynchronous processors, which do not require an external clocking signal, give better performance than comparable synchronous processors in situations for which global synchronization with a high-speed clock becomes a limiting factor to system throughput. Automatic synthesis and the ability to decouple the timing considerations from the design of computational blocks make this approach particularly attractive in reducing design effort when systems become complex. A number of issues relevant to asynchronous programmable processors such as interconnection circuit specifications, circuit design, data flow control, program flow control, feedback and initialization, and I/O interface are discussed. >