New channel routing algorithm for bit-slice applications

Wireless mesh networks are being deployed all around the world both to provide ubiquitous connection to the Internet and to carry data generated by several services (video surveillance, smart grids, earthquake early warning systems, etc.). In those cases where fixed power connections are not available, mesh nodes operate by harvesting ambient energy (e.g., solar or wind power) and hence they can count on a limited and time-varying amount of power to accomplish their functions. Since we consider mesh nodes equipped with multiple radios, power savings and network performance can be maximized by properly routing flows, assigning channels to radios and identifying nodes/radios that can be turned off . Thus, the problem we address is a joint channel assignment and routing problem with additional constraints on the node power consumption, which is NP-complete. In this paper, we propose a heuristic, named minimum power channel assignment and routing algorithm (MP-CARA), which is guaranteed to return a local optimum for this problem. Based on a theoretical analysis that we present in the paper, which gives an upper bound on the outage probability as a function of the constraint on power consumption, we can guarantee that the probability that a node runs out of power with MP-CARA falls below a desired threshold. The performance of MP-CARA is assessed by means of an extensive simulation study aiming to compare the solutions returned by MP-CARA to those found by other heuristics proposed in the literature.

A new channel routing model, which allows horizontal and vertical wire segments to be placed on both layers and two wires on different layers to be overlapped, is presented. Based on this model, the basic constraints as well as the rules of layer assignment and routing order in two-layer channel routing are obtained. Then the property of optimal overlapping in a zone is analyzed. For the example used, this algorithm obtains 18 tracks solution.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

The authors present a new three-layer over-the-cell channel routing algorithm, WILMA3 (wire length minimization algorithm 3), for high-performance circuits. This router not only minimizes the channel height by OTC routing but also minimizes the net lengths. They have also developed a two-layer router, WILMA2. Both WILMA2 and WILMA3 achieve reduction in channel height while maintaining the net length greater than its length in the two-layer channel routing. Experimental results with WILMA2 indicated that WILMA2 can produce routings that are comparable to existing two-layer over-the-cell routers. Both WILMA2 and WILMA3 achieved these results, while maintaining the net length bound. >

The goal of a channel routing algorithm is to route the nets with as few tracks as possible to minimize the chip area and achieve 100 percent connection. However, the manufacturing yield may not reach a satisfactory level if care is not taken to reduce the critical areas which are susceptible to defects. A new channel routing algorithm is presented to deal with this problem. The approach is to systematically eliminate critical areas by floating, burying, and bumping net segments as well as shifting vias. The yield optimizing routing (YOR) algorithm also minimizes the number of vias. The experimental results show that large reduction in the number of critical areas and significant improvement in yield are achieved. >

An efficient merger of the channel routing theory and the genetic stochastic search introduces a new paradigm for VLSI channel routing. The feasibility of the paradigm is demonstrated by the first genetic router for Manhattan model channels which contain cyclic vertical constraints. The router has been implemented as a self contained genetic algorithm system. It creates an initial population without violations of constraints using the results of a new theory of locally optimal breaking of cyclic vertical constraints. The population size is problem instance dependent to provide for the preservation of the structural diversity which is built into the initial population. A new encoding scheme and novel crossover and mutation operators are introduced. Convergence rates to optimal solutions are excellent.

With recent advances in vertical-integration technology, it is now reasonable to consider a three-dimensional IC structure containing either partially or completely stacked active layers. Thus it is possible to have stacked terminals at the channel edges. In this case, each terminal is constrained to a specific layer and therefore may only enter the channel on the layer to which it is constrained. For a channel of length λ using n layers for routing, it is now possible to have 2nλ terminals on the edges of the channel. A new channel-routing algorithm is presented for routing channels consisting of stacked and constrained terminals. The algorithm employs greedy heuristics, routing the channel column by column from left to right. The router guarantees a solution, although one or more extra columns off the end of the channel may be required. The heuristics of the router can be easily modified to rearrange priorities or to add new requirements or constraints. The algorithm has been tested extensively using randomly-generated channel descriptions. Very good solutions were obtained in a short amount of CPU time.

Spectrum-aware cross-layered routing protocol for cognitive radio ad hoc networks

An important part of the integrated circuit design process is the channel routing stage, which determines how to interconnect components that are arranged in sets of rows. The channel routing problem has been shown to be NP-complete, thus this problem is often solved using genetic algorithms. The traditional objective for most channel routers is to minimize total area required to complete routing. However, another important objective is to minimize signal propagation delays in the circuit. This paper describes the development of a genetic channel routing algorithm that uses a Pareto-optimal approach to accommodate both objectives. When compared to the traditional channel routing approach, the new channel router produced layouts with decreased signal delay, while still minimizing routing area.

In this paper, visualization techniques are applied to the implementation and analysis of a known channel routing algorithm. The main features of the algorithm are visualized in order to make easier the user's approach to it.

Adiabatic quantum-flux-parametron (AQFP) logic is a very energy-efficient superconductor logic due to zero static power dissipation and adiabatic switching operation. However, there is a shortage of electronic design automation (EDA) software tools adaptable to AQFP logic. Such tools are essential for designing large-scale-integration circuits efficiently. Therefore, we have developed a first set of EDA tools that handle cell placement and wiring, written in SKILL, the Cadence scripting language. Our tools also consider the maximum wire length constraint that exists in AQFP logic. First, AQFP logic cells are repositioned via the genetic algorithm to minimize the number of wires that violate the wiring length constraint. Buffers are then automatically inserted as signal repeaters for logic rows where the violations still exist. We then complete the logic wiring of the circuit using the channel routing algorithm. We demonstrate the usability of the EDA tools by designing a 16-bit adder as well as a randomly generated test circuit.

We provide efficient parallel algorithms for the minimum separation, offset range, and optimal offset problems for single-layer channel routing. We consider all the variations of these problems that have linear-time sequential solutions rather than limiting attention to the “river-routing” context, where single-sided connections are disallowed. For the minimum separation problem, we obtain O(lg N) time on a CREW PRAM or O(lg N/lg lg N) time on a CRCW PRAM, both with optimal work (processor-time product) of O(N), where N is the number of terminals. For the offset range problem, we obtain the same time and processor bounds as long as only one side of the channel contains single-sided nets. For the optimal offset problem with single-sided nets on one side of the channel, we obtain time O(lg N lg lg N) on a CREW PRAM or O(lg N) time on a CRCW PRAM with O(N lg lg N) work. Not only does this improve on previous results for river routing, but we can obtain an even better time of O((lg lg N)2) on the CRCW PRAM in the river routing context.KeywordsParallel AlgorithmMinimum SeparationChannel BoundaryConvex CornerEfficient Parallel AlgorithmThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

This paper presents a new algorithm for channel routing of multiterminal nets. We first transform any multiterminal problem of density d to a socalled extended simple channel routing problem (ESCRP ) of density 3d/2+O(√dlog d), which will then be solved with channel width w ≤3d/2+O(√dlog d) in the knock-knee model. The same strategy can be used for routing in the other two models: The channel width is w ≤ 3d/2+O(√dlog d)+O(f) in the Manhattan model, where f is the flux of the problem, and w ≤ 3d/2+O(√dlogd) in the unit-vertical-overlap model. In all three cases we improve the best known upper bounds.

As technology advances, interconnection wires are placed in closer proximity and circuits operate at higher frequencies. Consequently, reduction of crosstalk between interconnection wires becomes an important consideration in VLSI design. In this paper, we study the gridded channel routing problem with tbe objective of satisfying crosstalk constraints for the nets. We proposed a new approach to the problem which utilizes existing channel routing algorithms and improves upon the routing results by permuting the routing tracks. The permutation problem is proven to be NP-complete. A novel mixed ILP formulation and effective procedures for reducing the number of variables and constraints in the mixed ILP formulation are then presented. The new algorithm is tested on three large benchmark circuits as well as many randomly generated circuits. The experimental results are very promising.

Cluster networks are seen as the future access networks for multimedia streaming, e-commerce, network storage, etc. For these applications, performance and high availability are particularly crucial. Regular topologies are preferred when performance is the primary concern. However, due to spatial constraints or fault-related issues, the network structure may become irregular, which makes more difficult to find deadlock-free minimal paths. Over the recent years, several solutions have been proposed. One of them is the LASH routing, which enables minimal routing by assigning paths to different virtual layers. In this paper, we propose an extension of LASH in order to reduce the number of required virtual layers by allowing transitions between virtual layers. Evaluation results show that the new routing scheme (LASH-TOR) is able to obtain full minimal routing with a reduced number of virtual channels. For torus and mesh networks, with only two virtual channels, LASH throughput is increased by an average factor of improvement of 3.30 for large networks. For regular networks with some unconnected (faulty) links, equal performance improvements are achieved. Even for highly irregular networks of size up to 128 switches the new routing scheme only needs three virtual channels for guaranteeing minimal routing. Besides, LASH-TOR performs well compared to dimension order routing for mesh and torus networks.

Necessary and sufficient conditions for the routability of classical channels