Optimizing wireless sensor networks using fuzzy triangular snake graph models and fuzzy topological indices

Spread application of wireless sensor networks (WSNs), has led many researchers aiming at energy optimization in these networks. The Proposed Energy Efficient Harmony Search Routing Algorithm (PEEHSRA) in accordance with a novel energy model is stated in this study to minimize the amount of energy consumption in WSNs. We first proposed an energy model on the basis of modulation scheme parameters for multi-hop transmission. Then, in order to develop a harmony search routing algorithm, pitch adjustment rate in the harmony memory was introduced based on both, the proposed energy model, and the node’s distance. Also, an energy-efficient fitness function was determined, which results in the most energy-efficient route for the network. At the end, four modulations including MQAM, MQPSK, OQPSK and MFSK were applied and the most energy-efficient one with corresponding parameters was specified. By comparing the results of the proposed method to the state-of-the-art studies, the improvements in extending the lifetime of the network was proved. These findings seem quite useful in designing an energy-efficient multi-hop WSN and pave the way for enhancement of the widespread applications in these networks.

Resource Management Approach to an Efficient Wireless Sensor Network

Wireless sensor networks consist of a large number of low-cost, low-power, and multifunctional sensor nodes that communicate over short distances through wireless links. Such sensor networks are ideal candidates for a wide range of applications such as monitoring of critical infrastructures, data acquisition in hazardous environments, industry control systems, vehicular networks, and military operations. Wireless sensor networks introduce new security challenges due to their dynamic topology, severe resource constraints, and absence of a trusted infrastructure. The purpose of this special issue is to publish high-quality research papers as well as review articles addressing recent advances of wireless sensor network security. In this special issue, we will explore the topic of security challenges and solutions for the wide application of wireless sensor networks in different areas, such as RFID and smart grid. RFID has been widely used in logistics and internet of things. Smart grid leverages sensor networks to better balance the load of the power grid. Both of them have great impact on the daily life and areweak points of thewhole economy,which attract the attention of terrorists. The feasible attacks and defense solutions are still not clear.The papers in this volume also cover several important foundational security services for wireless sensor networks, such as key management, key distribution, secure cluster formation, secure architecture for multihop communication, intrusion prediction, and secure localization. All these foundational security services are critical bases for application of wireless sensor networks. We hope that the papers in this volume engender further thinking about new security challenges for wireless sensor networks and even further “out-of-the-box” ideas about how to solve new security problems for wireless sensor networks.

In order to reduce or avoid the coal mine accidents, this paper proposes the application of wireless sensor networks (WSN) in the coal mine safety intelligent monitoring system, and discusses the principle and advantages of wireless sensor networks. According to the current situation of low level of intellectualization in coal mine safety monitoring system and the existing problems, this paper proposes the designing proposal and the monitoring mechanism of the coal mine safety intelligent monitoring system, discusses the feasibility, the method and the way of the application of the wireless sensor networks in the coal mine safety intelligent monitoring system.

Developing Wireless Sensor Networks (WSN) applications is not an easy task, since it demands different expertise and knowledge. To address this problem, we propose a model-driven approach to build WSN applications. It promotes the separation of concerns between two levels of requirements involved: (i) domain experts, with no knowledge on WSN platforms, contribute to the development of applications, (ii) network experts, with no knowledge on the application domain, program nodes to meet application requirements. Our approach also promotes the reuse of software artifacts: an application model can be reused on different sensor platforms and a platform model can be reused for different WSN applications.

Internet of Things (IOT) is experiencing a super-fast growing phase. Wireless Sensor Networks (WSN), as the “five sense organs” and teleneuron of IOT, is developing fast along. Owing to the application-oriented characteristics of WSN, WSN applications may differ enormously in implementation methods. The WSN developers may have to rewrite the code for each and every application. Along with the increasing demand to WSN applications, WSN developers may have heavier tasks of programming for these applications. Thanks to TinyOS and NesC, an operating system and programming language designed especially for WSN, raises the WSN application's programming to a higher level. Large number of supported sensor hardware plus system provided and user-de-fined libraries eases WSN application programmers' jobs. How-ever, the massive amount of nodes' communication and networking, and security protection slows down the development pace. A unified and empirical WSN application implementation platform is one of the available solutions to the problem. This paper introduces an empirical WSN application implementation platform, which avails the WSN developers build an application with unified code template and network packet generation and processing strategies.

Wireless network of wearable biomedical sensors by human body shows great potential to enhance the biometrics performance significantly. Meanwhile, it poses prominent characteristics and challenges to physicians and engineers for its particular medical application as compared to other application of wireless sensor networks (WSN). Mobility pattern plays an important role in designing the wireless body sensor networks (WBSN) and will also affect the accuracy of modeling WBSN in health care application. Much of the mobility scenarios generated in current work of wireless body sensor networks has used fairly simple models to generate the mobile topological graph, which bear little resemblance to the actual mobility patterns. This paper is the first attempt to investigate the mobility model in WBSN based on the existing mobility models in wireless data networks and ad hoc networks. We first briefly review the existing mobility models in related research areas such as wireless ad hoc network and cellular networks. Further on, we propose a dedicated and more realistic mobility model named BAMM (Body Area Mobility Model) for wireless body sensor networks by concentrating on the unique characteristics of WBSN and finally study the effects of mobility on the performance of WBSN by simulation experiments.

The rapid advancement of programmable logic devices (PLDs) and field-programmable gate arrays (FPGAs) has enabled the development of adaptive VLSI architectures optimized for next-generation wireless communication systems. This research focuses on RFID and Wireless Sensor Network (WSN) applications, integrating AI-driven optimization techniques to enhance power efficiency, processing speed, and system adaptability. A hybrid AI-based hardware optimization technique, combining Reinforcement Learning (RL) and Genetic Algorithm (GA), is introduced to improve resource utilization and reduce latency. Additionally, an AI-Optimized Dynamic Frequency Scaling (DFS) technique is implemented to adjust FPGA operating frequencies in real-time, achieving a power reduction of 27.6% while maintaining high computational efficiency. Processor implementation for RFID-based power-saving appliances, reducing power consumption by 32.5% compared to conventional approaches. Hardware realization of an optimized anti-collision algorithm for RFID, achieving a 24.8% increase in tag identification speed. FPGA-based security architecture integrating lightweight cryptographic techniques, enhancing data security with a 96.2% encryption success rate and 25% lower hard-ware resource usage. Power-efficient WSN node implementation using an adaptive localization algorithm, reducing localization errors by 18.4% and extending node lifespan by 29.3%. Low-power CORDIC algorithm-based DPSK modem implementation with 32.1% lower latency in real-time signal processing applications. AI-Optimized DFS technique, reducing dynamic power consumption by 27.6% and improving computational throughput by 22.7%, making FPGA implementations more energy-efficient. The designs were developed using VHDL-based high-level hardware description, simulated in Xilinx ISE 14.3, and implemented on Virtex-5, Spartan-6, and Kintex-7 FPGA platforms. Performance evaluations and comparative studies with existing models confirm significant improvements in power efficiency, processing speed, and adaptability. The findings contribute to the development of high-performance, power-efficient, and scalable VLSI architectures for RFID and WSN applications, paving the way for next-generation secure and intelligent wireless communication systems.

Wireless industrial sensor networks are wireless sensor networks which have been adapted to industrial applications. Most techniques for wireless sensor networks can be applied to wireless industrial sensor networks. However, for industrial applications of wireless industrial sensor networks, new requirements such as real-time, reliable delivery need to be considered. In this paper, we propose EARQ, which is a novel routing protocol for wireless industrial sensor networks. It provides real-time, reliable delivery of a packet, while considering energy awareness. In EARQ, a node estimates the energy cost, delay and reliability of a path to the sink node, based only on information from neighboring nodes. Then, it calculates the probability of selecting a path, using the estimates. When packet forwarding is required, it randomly selects the next node. A path with lower energy cost is likely to be selected, because the probability is inversely proportional to the energy cost to the sink node. To achieve real-time delivery, only paths that may deliver a packet in time are selected. To achieve reliability, it may send a redundant packet via an alternate path, but only if it is a source of a packet. Experimental results show that EARQ is suitable for industrial applications, due to its capability for energy efficient, real-time, reliable communications.

Precision agriculture and agricultural decision making assistance have attracted researchers of engineering and agronomy as well as industries as a promising application of wireless sensor network (WSN) technology. However, agriculture is an industry with severe cost-cutting pressure and there is little advance guarantee that the WSN increases profit of farmers. Compared with other applications of the WSN such as power grid, civil engineering, etc., investment to the WSN cannot be expected so much. Nevertheless, if the problem of the cost is resolved, the WSN can be used with wide variety in the farm. The ready-made system satisfying requirements and constraints fully and generally of different farmers increases size and complexity of the system and finally the required investment. On the other hand, the full custom-made system for the individual farmer is not practical. This paper presents a concept of generative WSN framework enabling generation of semi custom-made WSN systems that satisfies requirements and constraints of individual farmers within a prescribed scope and also its fundamental technologies. The framework introduces a paradigm of software product line and manages core assets which are basis of the WSN system to be generated. Two tiered feature modeling, variation point mechanisms for hardware, and integer programming based optimization of system configuration are additionally developed technologies to realize the generative WSN framework.

The study introduced foreign and domestic situation of wireless sensor network technology in precision agriculture in detail. Applications of wireless sensor network are universal in foreign precision agriculture, however in its beginning stage in domestic agriculture. The function of domestic system based on wireless sensor network is usually positioning measurement and processing of agriculture elements, which does not meet final requirement of precision agriculture. The study designed a universal wireless sensor network for M2M combined intelligent communication technology and big agriculture machinery. The key technologies of wireless sensor network for M2M include development plan of ISA SP100.11a, spectrum technology based on DSSS, network technology based on net routing and low power radio frequency design, which can meet the real-time character, reliability, robustness and low energy consumption requirement of wireless communication in precision fruits. Moreover, the study presented several typical applications in precision fruits (including farming machine, water-saving irrigation machine and picking machine). With development of precision fruits in breadth and depth, integration application of wireless sensor network would have a widen prospect in the future.

The area of Ambient Intelligence recently seems to be matured enough and widely accepted as one of the basic supporting technologies and approaches for human living environment enhancement. There are many interesting applications of wireless sensor networks coupled with ambient intelligence applications, mainly for the creation of indoor intelligent spaces. However, there are just a few of them aiming at the enhancement of outdoor environments in order to support human activities typical for wide-area spaces in open natural environments. There are also a number of useful applications of wireless sensor networks aiming at environmental monitoring, however, just a few of them, if any, are taking advantage of recent achievements of Ambient Intelligence. In our paper, we intend to go further with the ideas of how the Ambient Intelligence used in a wide manner in connection with wireless sensor networks throughout the open natural environment could be beneficial not only for early warning in case of possible disasters, but also as an important supporting tool for people located in outdoor areas due to various reasons, e.g. hitchhikers, hikers on difficult mountains tracks, or even workers in exacting outdoor workplaces (i.e., a coal mine). An idea of a large-scale Ambient Intelligence system based on a wide area wireless sensor network is presented, where the system should be able to monitor the environment, evaluate the collected data and, if necessary, inform the workers in the environment about possible threats and also give some hints for their rescue, using various communication devices.

Congestion in Wireless Sensor Network (WSN) occurs when traffic load allocated to any sensor node is beyond its capacity. It is necessary to control the congestion traffic to support traditional quality of service (such as packet loss ratios, packet delay, wasting energy and throughput) especially, multimedia application of Wireless Multimedia Sensor Network (WMSN). Congestion control in WSN has been shown to be very effective with respect to extending lifespan of system. Hence to avoid the congestion in WSN, we proposed an efficient protocol called Priority-based Congestion Control Protocol (PCCP) which prevents an upstream congestion in WSN. The PCCP creates priority table based an importance of each node, and then sends this information to all the nodes within the network. Secondly, the major function of PCCP is to measure congestion level in the network using ratio of packet inter-arrival time along over packet service time. PCCP uses to control upstream congestion along with congestion degree and packet table. PCCP is hop-by-hop upstream congestion control protocol for WSN. PCCP provides work for packet-based computation to optimize congestion control. It can work under both single path & multipath routing. PCCP ensures guarantee of packet loss as well as delay, resulting each node can avoid unfairness and achieve flexible throughput. In this paper, we have proposed that PCCP provides better QoS by controlling network recourse management and network traffic to consuming efficient energy.

Several applications of Wireless Sensor Networks (WSN) demand information only from sub-regions of the monitored area. The user establishes the region of interest (RoI) and requires the WSN to collect data only inside this region. This kind of query is called spatial query. The state of the art of spatial query processing considers, in general, that nodes do not fail. However, nodes can be destroyed, interference can deny the communication and nodes can go to sleep mode (turn off the radio in duty cycles) in order to save energy. This work proposes a fault-tolerant energy efficient in-network spatial query processing mechanism for WSN. The proposed mechanism employs failure detection algorithms in order to avoid failed neighbors when forwarding and processing spatial queries. Our contributions are lightweight and resilient because they operate on demand and avoid the use of routing tables.

The wireless sensor network is an emerging technology, which is used to sense and monitor the environment. As the nodes are deployed in an open environment, the security is one of the essential factors. The cryptography techniques can ensure confidentiality, integrity and authentication. However, wireless sensor network also needs to deal with inside and outside attackers. To deal with outside attackers, attacks by compromised or malicious nodes, trust management system is suggested by many researchers in the area of wireless sensor network. Trust management system can be implemented in various applications for security management such as secure data aggregation, secure cluster head selection, trusted routing, access control, etc. Many researchers provide different kind of solutions for these secure applications based on trust management. However, to incorporate, all such applications on a single sensor node in the network, it is essential to design and develop a trust management system, which considers various aspects and applications of wireless sensor network. As a result, in this paper, we would like to propose a parameter and trust factor based secure communication framework and design a trust management system for wireless sensor networks. Our main contribution is to identify various parameters and trust factors which influences on trust in wireless sensor network and developing a framework for a trust management system based on various parameters and trust factors. The working of the proposed model is shown by simulation experiments conducted in MATLAB for the application of secure communication, data aggregation and intrusion detection in wireless sensor networks.