RACE-IoT: Shannon–Dragonfly Optimized Clustered Load Balancing in IoT Edge Computing

SummaryRecently, the deployment of novel smart network concepts, such as the Internet of things (IoT) or machine‐to‐machine communication, has gained more attention owing to its role in providing communication among various smart devices. The IoT involves a set of IoT devices (IoTDs) such as actuators and sensors that communicate with IoT applications via IoT gateways without human intervention. The IoTDs have different traffic types with various delay requirements, and we can classify them into two main groups: critical and massive IoTDs. The fundamental promising technology in the IoT is the advanced long‐term evolution (LTE‐A). In the future, the number of IoTDs attempting to access an LTE‐A network in a short period will increase rapidly and, thus, significantly reduce the performance of the LTE‐A network and affect the QoS required by variant IoT traffic. Therefore, efficient resource allocation is required.In this paper, we propose a priority‐based allocation scheme for multiclass service in IoT to efficiently share resources between critical and massive IoTD traffic based on their specific characteristics while protecting the critical IoTDs, which have a higher priority over the massive IoTDs. The performance of the proposed scheme is analyzed using the Geo/G/1 queuing system focusing on QoS guarantees and resource utilization of both critical and massive IoTDs. The distribution of service time of the proposed system is determined and, thus, the average waiting and service times are derived. The results indicate that the performance of the massive IoTDs depends on the data traffic characteristics of the critical IoTDs. Furthermore, the results emphasize the importance of the system delay analysis and demonstrate its effects on IoT configurations.

ABSTRACTIn recent years, the emerging development of Internet of things (IoT) has created new opportunities for IoT service provider, device manufacturer and customer (end user). In agriculture, employing IoT can help reducing manpower as well as standardizing agricultural processes, thus increasing the benefit for customer who does agricultural business. Beside the opportunities, there are also issues while doing maintenance for an agricultural IoT system. One of them is how to automate the process to detect faults of IoT devices in a large deployment area. While previous studies focus on investigating algorithms as well as theoretical model to detect faults for specific IoT devices, automatically expanding of IoT management process for detecting faults of sensor/actuator has not been investigated yet. To achieve this, we should be able to deal with the relationship between IoT device manufacturer, service provider and customer. In this study, we conceptualize the knowledge of IoT devices, management process and fault detection requirement. To realize this model, we introduce a runtime system to expand the IoT management process for detecting sensor/actuator faults which is able to provide the above features. We do several experiments to show the effectiveness and usefulness of the proposed solution.

Due to the rapid growth of the Internet of Things (IoT), researchers have demonstrated various IoT solutions, which are used to interconnect a wide range of IoT devices through the Internet. However, IoT stumbled into vertical silos; the available solutions provide specific IoT infrastructure, devices, protocols, data formats and models. This diversity and heterogeneity lead to interoperability issues. Heterogeneity happens at all IoT layers, especially at the application layer; devices often adopt mutually incompatible application-layer communication protocols to connect devices to IoT services. Furthermore, in order to integrate semantics to raw data, each system uses its one domain-specific ontology to make data more understandable and interpretable by adding semantic annotations. Working in isolation reduces the interoperability among IoT devices and systems, things across domains need to internetwork and collaborate to provide high level IoT services. Therefore, to alleviate the problem of both communication protocol interoperability and semantic interoperability across vertical silos of systems at the application layer, this paper proposes a semantic gateway (SGIoT) that acts as a bridge between heterogeneous sink nodes at the physical level and IoT services. SGIoT enables interconnectivity between communication protocols such as CoAP and MQTT regardless of their communication model, meanwhile it enables semantics integration throu gh cross-domain ontology (CDOnto) for semantic annotation, in order to provide interpretation of messages among IoT applications across domains. Our approach focuses on modularity and extensibility.

With the explosive growth of the Internet of Things (IoT) devices deployed in edge networks, the functionalities of IoT devices are typically encapsulated as IoT services, and user requests can be achieved through the composition of data and/or computation-intensive IoT services. Considering the prediction-uncertainty of forthcoming requests, certain IoT services may (i) not be hosted currently by appropriate IoT devices, or (ii) such an IoT service exists, but its non-functional properties may hardly be satisfied with respect to certain constraints prescribed by requests. To address this challenge, this paper proposes an efficiency-aware service Migration Scheduling (denoted eMS) mechanism in edge networks, in order to migrate IoT services on-demand, and thus, to optimally settle non-satisfiable constraints. Specifically, IoT services are re-scheduled, such that certain IoT services are migrated from their hosting IoT devices to neighboring ones, while minimizing the energy consumption and average delay caused by this service re-scheduling operation. We formulate this service re-scheduling as a multi-objective and multi-constraint optimization problem, which is solved through integrating the greedy algorithm into the fast non-dominated sorting and crowded-comparison operators as the hybrid genetic algorithm (G-NSGA-II). Based on real-life datasets provided by an oil pipeline monitoring project, extensive experiments are conducted, and evaluation results show that our eMS is promising in reducing the energy consumption and average delay of service re-scheduling in comparison with the state-of-art’s techniques.

Nowadays, with the rapid development of hardware and network technologies, various types of smart devices are released by different vendors, resulting in the emergence of Internet of Things (IoT). However, most of the existing approaches for IoT device management are designed in a centralized way, whose efficiency meets challenges recently because of the large scale of heterogeneous device modules and highly dynamic essence of the networks. To tackle this challenge, we propose a distributed approach for IoT device management and service composition from a social network point of view. Specifically, we introduce Restful web service to encapsulate heterogeneous IoT device modules, providing uniform interfaces for IoT service invocation. According to the relationships between IoT devices, social network theory is applied to model IoT services in different dimensions. After fully considering the social properties, a flexible and scalable schemes for IoT service composition is designed to satisfactorily meet users' requirements from several aspects. Finally, simulation experiments based on dataset from reality are conducted to validate the effectiveness of our approach.

The deployment of a client–server-based distributed intelligent system involves application development in both the network domain and the device domain. In the network domain, an application server (typically in the cloud) is deployed to execute the network applications. In the device domain, several Internet of Things (IoT) devices may be configured as, for example, wireless sensor networks (WSNs), and interact with each other through the application server. Developing the network and the device applications are tedious tasks that are the major costs for building a distributed intelligent system. To resolve this issue, a low-code or no-code (LCNC) approach has been purposed to automate code generation. As traditional LCNC solutions are highly generic, they tend to generate excess code and instructions, which will lack efficiency in terms of storage and processing. Fortunately, optimization of automated code generation can be achieved for IoT by taking advantage of the IoT characteristics. An IoT-based distributed intelligent system consists of the device domain (IoT devices) and the network domain (IoT server). The software of an IoT device in the device domain consists of the Device Application (DA) and the Sensor Application (SA). Most IoT LCNC approaches provide code generation in the network domain. Very few approaches automatically generate the DA code. To our knowledge, no approach supports the SA code generation. In this paper, we propose DeviceTalk, an LCNC environment for the DA and the SA code development. DeviceTalk automatically generates the code for IoT devices to speed up the software development in the device domain for a distributed intelligent system. We propose the DeviceTalk architecture, design and implementation of the code generation mechanism for the IoT devices. Then, we show how a developer can use the DeviceTalk Graphical User Interface (GUI) to exercise LCNC development of the device software.

Worldwide, Internet of Things (IoT) devices will surpass a range of five billion by 2025 and developed countries will extend to advance by supplying almost two-thirds of such connections. With existing infrastructure, allocating bandwidth to billions of IoT devices is going to be cumbersome. This paper addresses the problem of Dynamic bandwidth allocation in IoT devices. We enhanced the dynamic bandwidth allocation algorithms to support QoS in different bandwidth ranges. Our Proposed innovative Machine learning-based Intelligent Dynamic Bandwidth Allocation (IDBA) algorithm allocates the bandwidth effectively between IoT devices based on utilization patterns observed through machine learning methods. Moreover, we showed that an IDBA algorithm results in supporting quality of service in terms of ensuring uninterrupted bandwidth to critical IoT application where bandwidth tolerance is zero percent, along with that IDBA increasing the network throughput correlated to other dynamic bandwidth allocation algorithms. We demonstrate simulations in different applications. The results show that IDBA achieves better throughput even in low bandwidth range.

Pricing Models for the Internet of Things (IoT): Game Perspectives

Enhanced Dynamic Deep Q-Network for Federated Learning scheduling policies on IoT devices using explanation-driven trust

A huge amount of data is being generated in Internet of Things (IoT) devices used in smart homes, traffic sensors, smart cities and various connected appliances. Fog computing is one area which is quite popular in processing this huge amount of IoT data. However, there are challenges in these models for performing real time analytics in such data for quick analytics and insights. Fog analytics pipeline is one such area which can be a possible solution to address these challenges. In this chapter, an overview of using Fog computing platform for analyzing the data generated by IoT devices is provided. Fog computing platforms will be compared with the state-of-the-art to differentiate its impact in terms of analytics.

Since the Internet of Things (IoT) will be entwined with everything we use in our daily life, the consequence of security flaws escalates. Smart objects will govern most of the home appliances and car engines yielding potential disaster scenarios. In this context, successful attacks could lead to chaos and scary scenarios (www.darkreading.com). Unprotected personal information may expose sensitive and embarrassing data to the public and attacks may threaten not only our computers and smart devices, but our intimacy and perhaps our lives too. Because persons and objects will be bonded with each other, user consent becomes critical. Therefore, thing, object, and user Identity will be the focus of future IoT security solutions, yielding a Trust, Security, and Privacy (TSP) paradigm, which may constitute the Achilles' heel of IoT. While security issues are quite straightforward, mainly from background knowledge, privacy issues are far more complex. Privacy constitutes a rather challenging task, even for the m...

Over the Virtual Top. Digital Service Value Chain Disintermediation Implications for Hybrid Heterogeneous Network Regulation

The computational power of Internet of Things (IoT) devices is usually low, which makes it necessary to process data and extract relevant information on devices with higher processing capacity. Edge Computing emerged as a complementary solution to cloud computing, providing devices at the network edge with computational resources to handle the data processing and analysis that constrained IoT devices eventually cannot perform. This solution allows data processing closer to the IoT devices, reducing latency for IoT applications. However, the resource constraints of edge nodes, which have lower computational power than the cloud nodes, make resource allocation and processing massive requests challenging. This study proposes an edge resource allocation mechanism based on task priority and machine learning. The proposed approach efficiently allocates resources for IoT requests based on their task priorities while monitoring the resource consumption of edge nodes. This study evaluates the performance of different classification algorithms by using well-known metrics for classifying models. The most efficient classifier achieved an accuracy of 92% and a precision of 90%. The results indicate good performance when using this classifier in the evaluated approach. The proposed mechanism demonstrated that resource management can be done more efficiently with significantly lower resource utilization when compared to an allocation method based only on distance. The study tested different scenarios regarding the number of requests, edge nodes, and a proposed failure mechanism to schedule failed node tasks to functional nodes. This failure control mechanism is a significant contribution of the proposal. Therefore, the proposed method in this study can become a valuable tool for efficient resource management with reduced computational cost and efficient resource allocation.

SummaryWith the development of Internet of Things (IoT)‐related technologies and artificial intelligence (AI) technologies, various IoT services are becoming more intelligent, and their use range is increasing and diversifying. IoT hardware and IoT software must support AI‐related functions to provide an intelligent IoT service. In general, IoT devices powered by batteries have limited computing performance when compared to general computing environments. Therefore, it is essential to provide AI‐related functions at low power in IoT devices to implement and offer various intelligent services. Neuromorphic computing devices or neuromorphic computing architectures can operate with low power energy consumption. If applied to IoT devices, AI‐related functions can be implemented in a resource‐constrained IoT device environment. The proposed neuromorphic architecture abstraction (NAA) model dynamically selects the proper neuromorphic architecture by comparing the parameter size of a given SNN model. It also considers the specifications and error probability of the available neuromorphic architecture. We also implement the proposed model in a real IoT computing environment and show that the proposed NAA model and dynamic selection scheme can reduce the execution time for training and inferencing. It reduces the training and inferencing time of a given model compared with the method of randomly specifying the neuromorphic architecture.

Floods and water resource management are major challenges for human in present and the near future, and snowmelt floods which usually break out in arid or semi-arid regions often cause tremendous social and economic losses, and integrated information system (IIS) is valuable to scientific and public decision-making. This paper presents an integrated approach to snowmelt floods early-warning based on geoinformatics (i.e. remote sensing (RS), geographical information systems (GIS) and global positioning systems (GPS)), Internet of Things (IoT) and cloud services. It consists of main components such as infrastructure and devices in IoT, cloud information warehouse, management tools, applications and services, the results from a case study shows that the effectiveness of flood prediction and decision-making can be improved by using the IIS. The prototype system implemented in this paper is valuable to the acquisition, management and sharing of multi-source information in snowmelt flood early-warning even in other tasks of water resource management. The contribution of this work includes developing a prototype IIS for snowmelt flood early-warning in water resource management with the combination of IoT, Geoinformatics and Cloud Service, with the IIS, everyone could be a sensor of IoT and a contributor of the information warehouse, professional users and public are both servers and clients for information management and services. Furthermore, the IIS provides a preliminary framework of e-Science in resources management and environment science. This study highlights the crucial significance of a systematic approach toward IISs for effective resource and environment management.